Loading...

Backhaul radio link bonding (network bonding)

1,192 views

Loading...

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Oct 23, 2014

► Website: https://www.ligowave.com/
► Facebook: https://www.facebook.com/ligoptp
► Twitter: https://twitter.com/LigoWave
► Google+: https://plus.google.com/+LigoWaveWire...

In this video we will show:

- Aggregation of 2 radio links (backhaul radio link bonding).
- 4 radios are required to create a complete bond.
- A minimum of 2 unity radios are required

Installation recommendations
1. If using an integrated antenna, mount the devices at least 2 meter apart from each other. The further the better.
2. If using dish antennas, mount the dishes at least 0.5 meter apart from each other. The further the better.
3. Use different channels on UNITY and PRO links. The channel separation should be minimum 100 MHz, better 300 MHz.

Unity master configuration
1. Configure the UNITY backhaul radio link as master with a unique link ID.
2. Perform a spectrum analysis and identify a frequency with low noise.
3. Enable only the frequency selected under the channel list.
4. Choose the network mode as 2nd link configuration and change the default IP.

PRO master configuration.
1. Configure the equipment as master with a unique link ID.
2. Enable a frequency with low noise with a minimum separation of 100 MHz from the UNITY master frequency. A spectrum analysis can be performed.
3. Change the default IP.

UNITY slave configuration
1. Choose the network mode as 2nd link configuration and change the default IP.
2. Configure the device as slave with the same link ID as the UNITY master.

PRO slave configuration
1. Change the default IP.
2. Configure the device as slave with the same link ID as the PRO master.
3. Verify performance for the PRO link.

UNITY slave modification
1. Change the network mode from 2nd link configuration to trunking with packet aggregation and the trunking algorithm to exclusive or.
Important: Once the network mode is changed to trunking with packet aggregation the management of the pro radios will be lost, only the unity radios will be managed.

UNITY master modification
1. Change the network mode from 2nd link configuration to trunking with packet aggregation and the trunking algorithm to exclusive or.
2. Verify performance of backhaul radio link bonding.

Loading...

When autoplay is enabled, a suggested video will automatically play next.

Up next


to add this to Watch Later

Add to

Loading playlists...