 Γεια σας, είναι Vicky εδώ και σήμερα θα σας κοιμηθήσω 10 καρδιά από το καρδιά του Φεμβρουρικού Καρδιά by Siamoses D'Amp. Τώρα αυτό το καρδιά είναι σκέψει, αλλά θα σας κοιμηθήσω εγώ σε όλες τα σαπλάσματα που έχουν κοιμηθεί σε αυτοί. Τώρα για την εξεκτική εξέγραση να κοιμηθήσω αυτό το καρδιά, κάνω σωστά να βάθεις το βιβλό μου και να μην χρήσεις τα μάτια σας. Θα βρήξεις ένα βιβλό εγώ στον εξέγραση. Λοιπόν, ας δούμε ένα κομμάτι για να παρακολουθήσω το βιβλό μου. Φέρεις αυτό το καρδιά από εποχοριακές, ωραία και καρδιά. Φέρεις αυτό το καρδιά από εξέγραση με λίγο εποχοριακές, εξεκτικές και παρακλείπες. Έχεις ένα πίσω του καρδιά που έχει γράφει για να βρεινήσει το καρδιά σας. Υπάρχουν δύο παρακλείπες, αυτά είναι δύο σαν και μπορείς να δεις τα καρδιά που έχεις. Και έχουν εξέγρασεις να μπορείς να αφήθεις και να κομμάσεις στον εξέγραση. Για να τέλειξεις με μια σημαντική καρδιά, λοιπόν είναι ένα πολύ εύκολο καρδιά να δεις. Είχες also να βρεις αυτό το μεταλδι που εξεκτικά τη καρδιά. Και όπως always βρεις ένα καρδιά που είναι όλο για το καρδιά και το νίσο. Είχες also να βρεις 4 δύο καρδιά, και αυτά είναι οι χρώες. Και γιατί για το μονοδηλό μου, ας κάνω sempre 10 καρδιά από αυτή η καρδιά, θα προσπαθήσω 1 more cardstock από τη καρδιά μου. Λοιπόν θα φτιάξω 1 more white. Μετά το καρδιά και το νίσο, εδώ είναι όλα τα καρδιά που έχουν εξέγρασεις. Λοιπόν, ας ξεκινήσουμε με καρδιά number 1. Για την πρώτη καρδιά θα αφήθω, λοιπόν θα αφήθω ένα ρεκταγίδι από αυτή η καρδιά, βοηθούντας από το σημαντικό. Λοιπόν, τώρα μπορώ να εξεκτικάσουμε τη σημαντική καρδιά στον εξέγραση καρδιά. Υπάρχει και ένα πατρύμα εξέγραση στον εξέγραση που έρχεται με εξέγρασεις με ρεκταγίδι, που μπορείς να χρησιμοποιήσεις τα καρδιά σου ή μπορείς να εξεκτικάσεις κάποιες εξέγρασεις από το εξέγρασό. Λοιπόν θα εξεκτικάσω ένα που λέει, όπου θα πιστέσω να αφήθω στον very top. Θα εξεκτικάσω από αυτό και να δημιουργήσω ένα φίσταλ στο ένα σημαντικό, για να το κάνω να είναι πολύ ενδιαστοί. Και τώρα αυτό είναι ένα σημαντικό πατρύμα, μπορείς να το αφήσεις από ένα καρδιάς, your card is ready. Αλλά αν θέλεις να μπορείς να το δείξεις ένα πιο πιο, θα σας δείξω πώς θα θα δημιουργήσω ένα σημαντικό καρδιάς από αυτό. Λοιπόν θα δημιουργήσω τον σημαντικό σημαντικό και θα αφήθω πάνω αυτές τις εξέγρασεις. Παρακολουθείς ότι όταν χρησιμοποιείς το σημαντικό σημαντικό, θα εξεκτικάς πολύ σύντομα. Είναι εύκολο αν δεν έχεις να βρεις πολλά αυτοπίσταση και να πεις πάνω και πάνω από τις λαμπές, ένα ή δεύτερα. Και μπορείς να δεις πώς να κομπήσεις το σημαντικό μου σημαντικό με τα σημαντικά μου, για να αφήσεις ότι θα αφήσω όλα τα πράγματα, να αφήσεις ένα καλό καρδιά. Θα κάνω την ίδια εύκολη για την επόμενη. Και τώρα από όλα τα δεύτερα, θα αφήσω ότι θα αφήσω όλα τα αμπιστικές κόμματα και τα δεύτερα μου. Και τώρα που έχω όλα τα ανοίκολα, θα εξεκτικάς κιδεύτερα στον καλό καρδιά μου. Θα ήθελω ένα καρδιά αυτοπίσταση. Θα να δώσω αυτοπίσταση, γιατί θα εξεκτάσω αυτή η πάνω στον καρδιά μου, στις παραλές. Και θα αφήσω βήθυνα στη βηστάση, τα δεύτερα και τα δεύτερα. Και τώρα είναι όλα τα αμπιστικές κόμματα να δημιουργήσει ένα καρδιά. Εντάξει, θα προσπαθώ να βρεις κάποια τάπη στο μπαγκό της μπαγκός. Θα βρεις ένα ασσοταλί στο μπαγκό. Και όπως πάνω, θα χρησιμοποιώ το μπαγκό μου, θα πω πάνω σε αυτές τις μπαγκός. Και μέσα σε αυτές τις μπαγκός θα βρεις κάποια ασσοταλί. Αυτό είναι ένα πρόταγμα που είχα για χρόνια. Βλέπω σύγχαρα, είναι χρυμό και σύγχρο. Και θα δείχνει έναν καλύτερο σπαρκλό σε τα κατάστα. Πάνω nouvelle time. Now I will stick this panel on top of my card base making sure that I align everything correctly so that you can see the switch through the windows. My card is pretty much finished. All that's left to do it stick to my sentiment. I will add a piece of foam tape at the back as well. I will finish off my card by adding some touches of shine with my clear wing of Celia Glitter Pen. για αυτή η καρδιά εγώ βγω σε αυτή η παιδιά από την κοίτα έχει ένα πολύ σανηγημένο δοκιμάτι που πιστεύω πως δεν μπορείς να δεις παρακολουθεί σε εμένα. Θα δεις ένα κλωσόφωτο πιο αυτοφότος Οπότε θα σκοτήσω δυο φορές αυτή η καρδιά και θα σκοτήσω δυνατό σκοτήσω σε ένα πίσω βαθόνου καρδιά γιατί θα χρειαστεί μόνο τα καρδιά να είναι βαθόνου θα σκοτήσω δυνατό Τ unplab Π left go ahead and do some coloring i did stamp everything with my memento to Register black ink because i'm going to use alcohol markers to color everything and today i'm going to use my spectrum square markers i want the cups to be white so i'm just adding a little bit of shading there just to make them look more 3D Και όταν they are ready, I'm going to use my scissors to cut them out. So I'm going to do a lot of paper piecing for this card. And I'm going to stamp this coffee cup on top of this corrugated cardstock, just because I want to cut out the sleeve for the cups. I don't know if that's how that thing is called. Anyway, I'm going to call it a sleeve and you can just comment down below and let me know if there is a proper name for that. I don't need a perfect impression for that. I just want to follow the lines with my scissors so I can cut it out and then I'm going to paper piece it on top of my coffee cup. Now all the parts are ready to go. I'm using my tape and assembling my coffee cups. And the cup is actually patterned paper although they look pretty much the same with their plastic white tops. You will see the photo at the end. So I'm going to stick those on top again with my tape adhesive. For my sentiment I'm going with the one that says coffee and friends make the perfect blend but I want to stamp the first one with VesaMark and emboss it with white embossing powder and the rest of the sentiment I want it to be black. So I am using my scissors to separate those two lines. But of course if you don't want to cut out your stamps you can always use masking. So I'm going to stamp the black first and then I'm going to nest the other on top. Remove the line below and then use my VesaMark ink to stamp directly on top of the black line and then apply my white embossing powder. So I'm going to use my tape adhesive at the back of this patterned paper. I'm going to stick it directly on top of my cart base. Again I'm working on the white cart base and now I am going to apply some tape adhesive at the back of one of those coffee cups and on the other I'm going to apply some foam tape. This is going to give it a raised effect. So as if one is in front of the other I achieve that dimensional look that I always want for my carts. I'm also going to add some of these star sequins and for that I'm using some Matt Medium by Ranger. This is what I have in that bottle. And that's my second cart. For this cart I'm going to work directly on my craft cart base and I'm going to stamp the T-Bug. I'm going to create a nice background by stamping the T-Bug many times at the background. To do so I'm using a color by my favorite thing which is called Safety Orange. And once I fill everything at the background then I'm going to use my Prismacolor pencils to color the T-Bugs. For coloring I'm going to use only two pencils the brown and the white one so I'm going to apply some brown wherever I need to and then I'm going to cover everything up with the white which is going to blend out the brown and make it look more faded out and it's also going to add a nice detail on the T-Bug. I'm going for a very sketchy look so I'm not trying to blend out everything perfectly. You can see how sketchy all the lines are and now this is where I'm going back with my white to blend the brown and then I'm going to color the T-Bug white as well. After coloring my background I'm going to stamp the sentiment. For that I'm going to use the same ink pad that I used for the background and I'm going with a beautiful sentiment that says a human is like a T-Bug. You never know how strong it is until it's in hot water. And I think that the whole design of this card as well as the sentiment is make a great card to send to a human that is having a difficult time in her life. I used my paper trimmer to cut out this sentiment and create a tiny little label and for the center of my card I'm going to actually use a real T-Bug from my kitchen and to embellish my label a little bit more I'm going to use this pattern paper this is a leftover from my previous card I'm going to stick this sentiment so that you can see that yellow line this is going to give some more interest on my sentiment and I'm going to create a tag out of it so I'm just chopping out the corners and then I'm going to stick that on top of the real label and for one added element and a texture I'm going to use my tiny attache and add a staple at the top of this label so this holds everything nicely together now to stick the bag on top of my card base I'm going to use these glue dots these are big glue dots and they are going to hold this bag nicely on top of my card base at the back I'm using some foam tape so that I add a little bit of dimension on my sentiment and now to finish it off I'm going to stick some of those star sequins just to make my T-Bug look more interesting again I'm using my mat medium to stick everything down and this finishes off the third card for today and now for a very fun, quick and easy and a very colorful card I'm using this patterned paper and I'm going to cut out a rectangle this is a stitched die by Simon Says Stamp and once I have this panel I'm going to cut out little windows so for that I'm going to use this trio of square windows that I have but to create those windows if you don't have this die you can always use your ruler and your craft knife or any other type of punch, square punch or even your paper trimmer so I'm going to work on my white card base for this card I'm going to temporarily secure this panel on top with my pencil I'm going to mark one of those windows where I'm going to stamp the sentiment later on and on all of the rest of the windows I'm going to stick the stickers now remember that these stickers have a very strong adhesive and they are not forgiving at all so as I'm sticking them down I decided that I didn't want those coffee cups they were just close by but I couldn't remove anything so I'm just going to go with how it looks at the moment now I'm going to remove the panel and since I have that pencil mark there I know exactly where my sentiment should fall so I'm going to place the sentiment directly on top I'm using my misty for that at the back of my panel I have added some foam tape make sure to erase all the pencil lines and then I'm going to stick that directly on top making sure that I align everything correctly and this is going to finish off the card now for this card I'm going with this beautiful patent paper and I'm going to use this die by Simon's stamp that consists of two parts but really you can achieve the same exact look for this card even if you don't have this die but just punching out a circle you will see what I mean later on So anyway I'm using my T-Roller just to make sure that I align this die straight run it through my Scissix machine and this is what I end up with and you can use any of those shapes but I decided to go with this one and you can pretty much tell from the shape of it that you can just cut out a rectangle panel from this patent paper and punch out a circle or if you have a die you can die cut a hole there and this is why I said at the beginning that you really don't need this die So anyway for my sentiment I'm going to use this green strip of paper from this patent paper that says you are my cup of tea and it says that again and again all over the strip and I'm planning to stick that on one side of the panel Notice how I cut out the strip a little bit bigger so that I can attach one on top of the other with my tape adhesive making sure that only the green strip is showing and then with my scissors I'm going to cut out the inside so that I have that hole again and now to assemble my card I'm going to add some tape adhesive at the back of my panel I'm going to stick that directly on top of my card base making sure that it is aligned on one side and then I'm going to use my scissors to cut out the excess paper In the die set that I'm using there is a circle that fits inside that circle that I have already cut out but again if you don't have this die you can just cut out any circular stick it on top So I have cut out one out of white cardstock I'm adding some foam squares at the back to add some dimension I'm going to stick that just inside the hole that I have already on my paper and now I'm going to stick on top those two adorable coffee cups or maybe they are tea cups So anyway I'm going to stick them side by side and on top I'm going to stick one of those glitter hearts from the other set and I end up with this very simple but adorable card Now for this card I'm going to use the coffee cup and I'm going to stamp it on a white panel again and again many times for that I'm using my favorite things black ink which is very alcohol friendly so it's not going to smudge or smear when I'm using my spectrum rare colors to color everything I'm going to cover up the whole background with those coffee cups and now I'm going to use my spectrum rare markers to color it First I'm going to use my brown marker to color the coffee inside the cups but again I'm not paying a lot of attention on how I'm coloring everything here because I will end up covering up the coffee with embossing powder and this is going to give it a nice shine These are the three colors that I'm using for coloring my coffee cups I'm going to make the whole design monochromatic so all the cups are going to be exactly the same but I know that it's going to look beautiful if you go with the rainbow color scheme The markers I'm using today come from the latest release by Spectrum Noir so they came up with two sets of 24 new colors for our spectrum noir and I'm going to link everything down below Now this is an embossing pen and I'm going to neatly apply embossing ink only where the coffee is so that I can apply my clear embossing powder and this is by Nouveau and this is going to turn my coffee into shiny coffee which is going to give a nice texture and shine on my background So I'm going to repeat the same process for all the coffee cups and now I'm going to use my heat gun and melt the powder Now for the sentiment I have used this banner dye and cut out a piece of white cardstock but again if you don't have the banner you can easily create that fishtail with your scissors I'm going to use my misti to stamp the sentiment and for the sentiment I'm going with the one that says with enough coffee anything is possible I'm going to stamp that with black ink and then I'm going to stick that directly on my panel with some foam tape at the back and to abolish my background a little bit more in the epoxy sticker set there are some coffee grains which I'm going to use all over the white space on my background I'm going to use the craft cardstock as my card base I'm going to stick the panel on top and you can see that my panel is slightly smaller than the standard card having that beautiful frame all around and now you can leave the card as it is but if you are like me and you cannot stop with little details I think that no coffee cup is cute enough without polka dots so I'm going to add some white polka dots here and there on my coffee cups and for that I'm using my nouveau drops and this is going to finish off the card for this card I'm working directly on my card base and now I'm going to white emboss the sentiment I'm going with a sentiment that says coffee in French make the perfect blend I did use that sentiment earlier on one of my cards making sure that I have stamped everything nicely and now I'm going to apply some white embossing powder and hit set it and now I'm using the dye that comes in the set to cut out 3 of those coffee cups in white and 3 coffee cups in 3 different colors but what I want to do here is to do some paper piecing later on so I have the top of the coffee cup in white the main body of the coffee cup in 3 different colors I also have the hands in white and the hearts in red so I'm going to do some assembling now notice how I'm going to cover up the bag with foam tape which is going to make all those little holes on the front although that it's going to be super easy for me to stick everything inside I'm going to stick those 3 guys on top of my card pace and now from the white cutouts I'm going to cut out only the top part and stick it directly on top of my coffee cups to do so I'm using my Nouveau Glupin it's really handy for these tiny little pieces and now all I need to do is to stick inside those holes the rest of the tiny pieces so I need to stick inside those tiny little hands which are this is a very easy card to create but the tiny little pieces make it really hard so a great saver is the pick me up tool which really makes this process easier than it looks I'm going to leave a link down below on this tool and it's really handy to have in your craft room for all those tiny little pieces that you need to pick up now I'm also going to color the hearts white with a red marker and now with my pick me up tool again I'm going to stick them just inside as if they are holding the little heart I did the same thing for the mouth but instead of fighting with those tiny little pieces for the eyes I decided to use my black Nouveau drops and just create my own eyes which are after all dimension and they give more of a character to my guys now I'm using my clear wing of style a glitter pen to add some shine on the hearts and my card is ready for this card I'm going to work with the white card base I have cut out this panel and stick it directly at the center of my card base and now from this beautiful patterned paper with all those images I'm going to cut out the one that says be mine with all those little hearts and this is going to be a great Valentine's Day card now I want to create a pocket for this little image and this is my way of creating a pocket without measuring anything so I'm just eyeballing it there I'm using a scrap piece of patterned paper that I have left over from a previous card and I'm just going to create some flaps on the three sides of this paper so that my image slides nicely inside I'm eyeballing again how height I need this to be I'm going to use my trimmer to cut it out and you can see how nicely this slides inside now I'm using my punch to punch out a little hole at the top so that the recipient knows that there is something inside of that pocket and it's going to make it easier for Rahim to pull out that little image from the inside I'm adding some strong adhesive at the flaps of this pocket and now I'm going to stick that directly on top of my card base and you can see how my image slides inside now to make it even easier for the recipient to take out this image I'm going to add a piece of ribbon and you all know where I found my ribbon it's in that drawer of shame so anyway I'm also going to punch out a circle I'm measuring how much I need to fold it to cut it out and now I'm going to stick that on top of my ribbon and this is going to cover up the stapler that I have used to hold my ribbon in place so I'm going to use a glue dot there and I have a nice top for my tag and it's really easy to pull out now to decorate the top of that pocket I have cut out the word u from an older die that I have by Simon's stamp and again I'm going to stamp a Valentine's sentiment that says p.s. I love you but instead of stamping the word u I have it out of a die cut I'm cheating here because I'm not using the stamp set from the kit I'm using some Nuvo Glupen at the back of my die cut so that I can stick it easily on top of my little pocket there and to embellish it even more I'm going to add some of those stars I think they go perfectly with the color of the pocket again I'm using my multi medium that I have in that fine tip bottle and with my pickup tool I'm going to stick them directly on top of that glue and that finishes the card now for this card I want to do some masking so first I'm going to stamp my image then I'm going to stamp the same image on a post-it tape cut it out with my scissors so that I can use it as a mask and just because I need only one side I'm not going to bother with cutting the whole image out I'm going to place it directly on top of my coffee cup and then stamp the other one so when I peel off the masking it's going to look as if it's at the back I'm using my spectrum noir markers to color my images and I'm picking the colors based on the colors from the pattern papers so I'm going to color everything and now I'm going to use my craft knife and cut out where the coffee should be to create a tiny little shaker element here as my embellishment for my card I'm making sure that I get rid of that white edge with my black marker and now I'm going to use my scissors and cut out these images and since this is going to be a shaker element I have applied some tape adhesive at the back I am stinging my acetate to cover up the window and now with my foam tip I'm going all around that window to create a little pocket where I'm going to apply some microbeads with my spoon just inside the window I am covering the back with a piece of paper and I'm going to use my scissors to cut out all the excess whatever of that paper sticks out so now I have my embellishment ready now I'm going to stamp the sentiment and for that I'm going with the one that says I need two things you and coffee and I'm actually working on one of the tags that comes out of one of the pattern papers which is full of those tiny little tags now I am going to stamp the rest of the sentiment and once that's ready I'm going to apply some tape adhesive at the back and stick my handmade embellishment on top and as I'm moving to the end I'm using more and more of my scrap this little panel out of one of the scraps that I have left from a previous card on the tag I am applying one of my eyelets using my cropper tile I'm going to thread some white twine and my tag is ready I'm going to stick this little piece of paper on top of my card base and then my tag on top of that and my card is ready for my last card I'm going to use this set by my favorite things and it's going to cut out three little circles and the panel is going to have a nice scalloped edge but you can go and create the same design by just cutting out a triangle and use a circle die to cut out three circles at the center so I'm going to cut out some foam tape I'm going to go all around those holes but just to make sure that I have a nice and sturdy panel I'm placing it against the card base that I have left over which is the blue one I'm going to stamp the sentiment on one corner and the truth is that this sentiment would look beautiful if it was white and post but after creating nine cards I was in a hurry so anyway I'm going to use the leftover stickers from the epoxy set and I'm going to stick them inside and the sentiment of this card says life is like a cup of tea it's all in how you make it and actually these image stickers help you create different types of tea like the tea bags or the sugar etc so I have used my white gel pen to create some thread for those tea bags and I'm going to peel off the backing from my tape adhesive and I'm going to stick that panel directly on top of my card base making sure that I align everything correctly and that's the last card for today so now let's take a quick look on all the ten cards that I created using the February card kit by Simon Says Stamp and these are my leftovers for my stash I have the die, the stamp and of course all those little elements I still haven't used any of those paper clips and I have many more images as well as two 6x6 full pattern papers and these were the cards for today I hope you had fun and got inspired and if you did don't forget to leave me a comment as well as give me thumbs up on my youtube channel you will find a full list of all the supplies that I used today down below the description area as well as on my blog don't forget to visit my blog and enter that giveaway thank you all for watching