CMP A2F Cable Glands - Hazardous Area Flameproof ATEX Cable Glands for Unarmoured Cables




Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Feb 7, 2014


CMP A2F Flameproof (Type 'd'), Increased Safety (Type 'e') and Restricted Breathing (Type 'nR') indoor and outdoor cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas.

CMP A2F hazardous area cable glands are suitable for terminating unarmoured cables.

CMP A2F hazardous area glands provide a combined flameproof seal and environmental seal on the cable outer sheath - CMP A2F cable glands provide full compatibility with restricted breathing equipment that rely upon flammable gases being excluded from the main enclosure.

CMP Industrial, Hazardous Area, HV, Marine & Offshore Cable Glands

CMP Cable Glands, Cable Connectors and associated accessories are used extensively for low-high voltage power, control, lighting and instrumentation cable termination applications in connection with IEC and NEC cables. CMP Cable Glands terminate Industrial, Hazardous Area, High Voltage, Offshore & Marine and Non Hazardous (Industrial) Area cable termination applications. CMP manufacture Cable Glands with Ex d/Ex e Zone 1, Zone 2, Zone 21 and Zone 2 approvals for use in Gas Group IIC environments under CENELEC and IEC Area Classification rules. Additionally, Cable Connectors for NEC Classified Hazardous Locations are available for Class I, II and III Divisions 1 & 2, where Gas Groups A, B, C, D and Dust Groups E, F & G are present. CMP Cable Glands carry international Hazardous Area Approvals from ATEX, SIRA, CEPEL/Inmetro, CSA, UL, GOST, NEPSI, TUV, and CIDET. CMP Cable Glands are Marine Classification Society Approved by Lloyds Register, DNV and ABS for terminating marine and offshore shipwiring cables.


When autoplay is enabled, a suggested video will automatically play next.

Up next

to add this to Watch Later

Add to

Loading playlists...