3,929
  • Jake von Slatt - The Steampunk Workshop

    19,561 views 4 years ago
    Jake von Slatt is a maker, tinkerer, and all around techno dilettante living and creating just outside of Boston, Massachusetts. Jake is interested in the blending of 19th century aesthetics and technology with the modern world and showcases projects of that ilk on his website at http://steampunkworkshop.com. While he eschews the temptation to rigidly define the term "Steampunk," he does know that it has something to do with the intersection of technology and romance. Show less
    Read more
  • Uploads Play all

    This item has been hidden
  • Popular uploads Play all

    • THIS IS MY WORST VIDEO! Why does it make the most revenue? - Duration: 9 minutes, 25 seconds.

      • 4 years ago
      • 282,859 views
      The vibratory tumbler I purchased for a steampunk project failed after the first use. So I built this heavy duty replacement from old car parts, appliance parts, and aluminum scrap.
    • Using a Tap to Thread a Hole - Duration: 2 minutes, 20 seconds.

      • 6 years ago
      • 106,215 views
      How to use a tap and die set to thread a hole in a brass telegraph sounder.
    • Steampunk Keyboard Touch-typing - Duration: 15 seconds.

      • 7 years ago
      • 105,745 views
      The Lady von Slatt touch types on this IBM Model-M based Steampunk keyboard.
    • Jake von Slatt - School bus RV - Duration: 6 minutes, 2 seconds.

      • 6 years ago
      • 98,104 views
      Jake shows us the school bus he converted to an RV

      And yes, that is the shore-power cable dragging behind the bus in the last scene! It caught on the tow hook after I disconnected it. Fortunately ...
    • Anvil Face Hardening - Duration: 19 minutes.

      • 2 years ago
      • 58,878 views
      I have been assembling an anvil from several slabs of mild steel that have been kicking around the workshop. I milled a horn onto one slab and in this video I harden the billet that will be the top...
    • Monkey Hut (new version) - Duration: 5 minutes, 51 seconds.

      • 2 years ago
      • 54,258 views
      A Monkeyhut shade structure for Burning Man. I used this design: http://www.chromatest.net/Lovemonkey/

      Music by http://NathanielJohnstone.com
    • Steampunk Keyboard: Remove the skirts from IBM Model M keys. - Duration: 103 seconds.

      • 6 years ago
      • 30,638 views
      Here is a short movie demonstration the process of removing the skirts from the key caps.
    • HOMEMADE WELDER! 250 AMPS from old car engine! - Duration: 15 minutes.

      • 1 year ago
      • 26,758 views
      A DIY engine driven welder made with a 1946 Austin Dorset engine and a 250 Amp Ford high-output alternator.
    • Melting Aluminum in a Waste Oil Foundry Furnace - Duration: 8 minutes, 40 seconds.

      • 8 years ago
      • 22,395 views
      Final test of Jake von Slatt's waste oil foundry furnace. Aluminum is melted, last year's turkey fryer oil is burned.
    • Tom Sepe's Whirlygig Emoto Steampunk Motorbike - Duration: 13 seconds.

      • 7 years ago
      • 20,430 views
    • Jake von Slatt - The Steampunk Workshop - Duration: 4 minutes, 46 seconds.

      • 4 years ago
      • 19,561 views
      Jake von Slatt is a maker, tinkerer, and all around techno dilettante living and creating just outside of Boston, Massachusetts. Jake is interested in the blending of 19th century aesthetics and te...
    • Steampunk Keyboard flush cutting the typewriter keys. - Duration: 46 seconds.

      • 6 years ago
      • 14,850 views
      The cheaper typewriters keys on eBay are usually removed quickly with a bolt cutter or angle grinder with a cutting disk, I needed to cut these flush before I could use them. Heres a movie that sh...
    This item has been hidden
  • Jake von Slatt Play all

    Videos in which Jake von Slatt (or his stuff!) make an appearance.
    This item has been hidden
to add this to Watch Later

Add to

Loading playlists...