725
  • bad digital filter simulator proto-type 1 - Duration: 9 minutes, 41 seconds.

    • 1 month ago
    • 396 views
    Various snippets from testing and honing this circuit over the past few weeks. As the name describes, it is an analogue circuit designed to simulate a digital filter - badly. It is not capacitor ba...
  • The Big Room 2 - Duration: 3 minutes, 51 seconds.

    • 1 month ago
    • 440 views
    Eurorack spring reverb module, available assembled or PCBs and panels for DIY. More info: https://nonlinearcircuits.blogspot.com/2018/10/the-big-ro...
  • dual LPG 1 - Duration: 3 minutes, 21 seconds.

    • 2 months ago
    • 617 views
    Dual Low Pass Gate - pretty standard except it uses the black box vactrol method seen in the Shat-noir Phaser and Noiro-ze VCF/VCA. DG analogue switches are used for changing between filter and gat...
  • Noiro-ze VCF & VCA - Duration: 6 minutes, 35 seconds.

    • 3 months ago
    • 731 views
    Giant 4 way vactrol filter based on Steiner core but without the diodes.....and a VCA. More info - https://nonlinearcircuits.blogspot.com/2018/08/noiro-ze-v...
  • Shat noir Phaser - Duration: 5 minutes, 42 seconds.

    • 4 months ago
    • 868 views
    nonlinearcircuits.blogspot.com/2018/07/shat-noir-phaser.html
  • Kareishuu VCO 2 - Duration: 4 minutes, 56 seconds.

    • 6 months ago
    • 1,015 views
    Tri-core VCO with self-mod and a VCA on the FM input. In this vid just the sine out is listened to, FM source is sine from another VCO and CV source for the FM VCA is a Hypster Hyperchaos (which i...
  • its 555 eurorack 1 - Duration: 2 minutes, 30 seconds.

    • 6 months ago
    • 1,051 views
    This module turns any incoming signal into a series of 5 pulses. Each pulse can be inverted or positive and have its amplitude set. the Pulse width can be controlled by CV. A different kind of reso...
  • statues 1 - Duration: 5 minutes, 10 seconds.

    • 7 months ago
    • 1,255 views
    http://nonlinearcircuits.blogspot.com.au/2018/04/statues....
    This is an 8 way multiplexor with a track and hold circuit on each output.
  • Hypster 1 - Duration: 4 minutes, 56 seconds.

    • 7 months ago
    • 1,523 views
    Having some fun with Ian Fritz's Hypster, available thru nonlinearcircuits:
    http://nonlinearcircuits.blogspot.com.au/2018/04/ian-frit...
  • Splosh 1 - Duration: 83 seconds.

    • 7 months ago
    • 1,385 views
    THIS VIDEO CONTAINS NO ACTUAL SPLOSHING......sorry it is a Eurorack synth module that mixes together CVs and audio in various ways
    http://nonlinearcircuits.blogspot.com.au/2018/04/lets-spl...
  • resonate - Duration: 2 minutes, 24 seconds.

    • 9 months ago
    • 1,709 views
  • bindubba eurorack sequencer 1 - Duration: 118 seconds.

    • 1 year ago
    • 2,001 views
    16 stage analogue sequencer.
    info here - http://nonlinearcircuits.blogspot.com.au/2017/11/bindubba...
  • divide & conquer plus a sly grogan - Duration: 2 minutes, 11 seconds.

    • 1 year ago
    • 1,499 views
    Just a patch based around the Divide & Conquer, the Sly Grogan is fairly evident as well.
    http://nonlinearcircuits.blogspot.com.au/2017/10/divide-c...
    http://nonlinearcircuits.blogspot.com....
  • hyperchaos deluxe1 - Duration: 2 minutes, 53 seconds.

    • 1 year ago
    • 1,890 views
    Hyperchaos Deluxe as the centre of a patch controlling a thru0 VCO, VCF, Timbre and a Bong0.
    http://nonlinearcircuits.blogspot.com.au/2017/10/hypercha...
  • Primal Hyperchaos 2 - Duration: 59 seconds.

    • 1 year ago
    • 931 views
    Battery went flat about 2 minutes into this, so short'n'sweet. 100nF and 20uF versions controlling 2 VCOs, 2 LPGs, a Timbre and a bong0.
    More info - http://nonlinearcircuits.blogspot.com.au/2017/0...
  • Primal Hyperchaos 1 - Duration: 5 minutes, 51 seconds.

    • 1 year ago
    • 1,746 views
    Hyperchaos module - can be built to run at a variety of rates. The versions in this vid use 1uF capacitors and then from approx 2:25 slow right down with 10uF.
    http://nonlinearcircuits.blogspot.com...
  • ARSEq eurorack - Duration: 3 minutes, 43 seconds.

    • 1 year ago
    • 1,660 views
    ARSEq = Attack Release SEquencer.
  • divine CMOS (eurorack vers.) - Duration: 5 minutes, 56 seconds.

    • 1 year ago
    • 1,603 views
  • Null-A and friends - Duration: 99 seconds.

    • 1 year ago
    • 701 views
    just a quick grab from a 3U synth with Null-A, EF, CEM3340 VCO, Timbre, bong0 & mixer
  • A Plague of Demons: thru-0 VCO - Duration: 3 minutes, 33 seconds.

    • 1 year ago
    • 2,902 views
    Just getting some sounds from the sine output. More info:
    http://nonlinearcircuits.blogspot.com.au/2017/05/plague-o...
  • Null A2 two - Duration: 87 seconds.

    • 1 year ago
    • 2,654 views
    Another little patch with this one, production run PCBs and panels should be available from mid Feb 2017
  • nullA2 taster - Duration: 70 seconds.

    • 1 year ago
    • 2,094 views
    1st play with the NULL-A. It has 2 VCOs, state variable VCF, ladder VCF, S&H, 2 LFOs, frequency divider, 3 VCAs, Sloth chaos, ADSR, 4 stage sequencer with direction control, mixer, VC Delay and a h...
  • bong0 #2 - Duration: 94 seconds.

    • 2 years ago
    • 2,903 views
    A short demo of the bong0. The one on the left has its raw signal patched to the mixer, the one on the right is patched to a Timbre! and then to the mixer. Both Bong0s are fed gates and CVs from a ...
  • Feague 1 - Duration: 5 minutes, 4 seconds.

    • 2 years ago
    • 3,610 views
    Feague is a 4 pole VCF and quadrature oscillator. I use 2 in this vid, one as a VCF fed a steady signal from a VCO. The other is used as a QUO and gets modulated and sync'd by a LFO to get some bur...
  • wangernumb 1 - Duration: 2 minutes, 44 seconds.

    • 2 years ago
    • 2,737 views
    wangernumb duets with a CEM3340 VCO
  • CEM3340 VCO #2 - Duration: 4 minutes, 53 seconds.

    • 2 years ago
    • 4,654 views
    1st half of vid has 2x CEM3340 VCOs fed to a Timbre! and a FK1T VCF. In the 2nd half the VCOs are sync'd and just the raw outputs are fed to the mixer. The controlling patch from a dual LFO and 4SE...
  • 8bit Cipher - Duration: 7 minutes, 41 seconds.

    • 2 years ago
    • 2,615 views
    8bit Cipher being used as the timing & CV source for a patch involving Doofs, bong0s, badum Tisss, CEM33400 VCO, timbre! & LPG.
    The 8bit Cipher is getting its clock and data signals from 2 LFOs.
    Mo...
  • cem3340 1st try - Duration: 2 minutes, 2 seconds.

    • 2 years ago
    • 2,211 views
    This is a proto-type of a CEM3340 based VCO. Just pleased it was working well so recorded a minute of it.
    The production version will have a 2mm white panel with ENIG gold labelling.
  • NLC Eurorack drums - Duration: 8 minutes, 7 seconds.

    • 2 years ago
    • 4,716 views
    2 bong0s, 2 doofs & 1 badum tisss. All analogue circuits. No other sound sources used. More info - http://nonlinearcircuits.blogspot.com.au/
  • drummy - Duration: 4 minutes, 24 seconds.

    • 2 years ago
    • 2,126 views
    Using the Numberwang to control 3 drum modules; doof, BadumTiss and bong0. You can, of course, tune these to sound like regular (electronic) drums.......if you really have to.
  • squid axon 2 - Duration: 3 minutes, 32 seconds.

    • 2 years ago
    • 2,376 views
    The squid Axon is fed a fast clock from a VCO and samples a tri-wave from an LFO, 2 CV outputs are to VCOs and 2 outputs to a 'scope in X-Y mode. It makes a nice lightshow.
  • DelayNoMore - Duration: 4 minutes, 42 seconds.

    • 2 years ago
    • 1,806 views
    was asked to make a vid where you can hear the original clean signal. I hope this shows that the DelayNoMore is a crappy delay module but good at glitchy mayhem, which is what it was designed to do.
  • Giant b0n0 #3 - Duration: 6 minutes, 38 seconds.

    • 2 years ago
    • 2,719 views
    a bit of fun with a Giant B0N0
  • squid axon 1 - Duration: 103 seconds.

    • 2 years ago
    • 3,476 views
    Just some examples of the signals from the Squid Axon when fed a tri-wave and clocks at various rates. Adjusting the feedback pots gives various chaotic bursts. More info - http://nonlinearcircuits...
  • numberwang - Duration: 65 seconds.

    • 2 years ago
    • 2,868 views
    Numberwang fed 4 LFO signals and doing its thing. It is basically a gate pattern generator. Shinty-six is a real number.
  • giant B0N0 2 - Duration: 2 minutes, 56 seconds.

    • 2 years ago
    • 2,458 views
    more giant B0N0, really kicks off about 30s in.
  • 329 phase flange 1 - Duration: 101 seconds.

    • 2 years ago
    • 3,298 views
    module based on the Aries 329 Phase/Flange. ummmm this thing is fkn great, does so much more than a stand-alone phaser.
    Starts with 2 inputs from a Sloth chaos, then it gets some audio rate tri-wav...
  • 1050 MixSeq - Duration: 79 seconds.

    • 2 years ago
    • 2,971 views
    This module is a mixer, 8 stage sequencer, two 4 stage sequencers and a sequential switch.
    Functionally based on the core of the ARP2500 1050 mixer sequencer.
  • brain custard 1 - Duration: 2 minutes, 25 seconds.

    • 2 years ago
    • 3,602 views
    Just a quick demo of some of the sounds from this module. 9 audio rate chaotic signals mixed to form 'neuron clusters' The idea is low frequency patterns will emerge from the mayhem.
  • fk1t VCF - Duration: 6 minutes, 45 seconds.

    • 2 years ago
    • 2,945 views
    This filter is based on the korg Fk-1 pedal. It shared the same topology as the other Korg filters found in the 800dv and 700, but used 4 vactrols........oh!
    Probably good to wear headphones or lis...
  • aries 329 phase clone - Duration: 2 minutes, 35 seconds.

    • 2 years ago
    • 1,050 views
    1st play with this module. Still a bit of tweaking of the trimpots to do and adjust some signal level, but it seems to sound pretty good!
    Circuit is based on the Aries 329 phase/Flange, which is no...
  • giantB0N0 - Duration: 4 minutes, 37 seconds.

    • 2 years ago
    • 1,396 views
    The offspring of a vactrol PiLL and a DelayNoMore. Using 4 outputs: mix out is straight to the mixer, two others are via LPGs, the 4th is used to CV the LPG cutoff.
  • Sub Ordnance - Who me? - Duration: 4 minutes, 41 seconds.

    • 3 years ago
    • 333 views
    another one from the studio in stereo no less!!!
  • Sub Ordnance - squirrel grip - Duration: 4 minutes, 5 seconds.

    • 3 years ago
    • 119 views
    another studio recording!
  • Sub Ordnance - these flies! - Duration: 3 minutes, 41 seconds.

    • 3 years ago
    • 106 views
    An actual studio recording from S.O.!!!
    honk'n sax by Lee
    Video is PUBLIC DOMAIN material from archive.org.
  • modded neurotic panel - transient generator - Duration: 3 minutes, 16 seconds.

    • 3 years ago
    • 333 views
    testing some modules on a custom panel
  • reflow - Duration: 4 minutes, 54 seconds.

    • 3 years ago
    • 296 views
    a short vid to show the process of using a solder stencil, parts placement and reflow oven (ControLeo2)
  • cellF hall - Duration: 60 seconds.

    • 3 years ago
    • 4,097 views
    A very quick behind the scenes look at the setup for the 1st performance of cellF. This was filmed on a very crappy old mobile-phone, so def. not HD. More info here - http://guybenary.com/work/cellf/
  • soldering and stasis - Duration: 10 minutes.

    • 3 years ago
    • 651 views
    10 minutes of me soldering smd onto 3 action PCBs whilst the synth carries on behind me. Stasis Sloth, Super Sloth, FF chaos, 2 x 4SEQ, Timbre! and Multi-band Distortion.
  • serious filter 1 - Duration: 2 minutes, 23 seconds.

    • 3 years ago
    • 1,960 views
    short play with this module, based on the Arp4023 VCF. More info - http://nonlinearcircuits.blogspot.com.au/2015/08/serious-...
to add this to Watch Later

Add to

Loading playlists...