- To measure your boat for a cover, you will need two measurements:
1. Centerline length (from tip to tail)
2. Beam width (side to side at the widest point)
Make sure all measurements are done in a straight, horizontal line, without any fixtures in the way.
Note: If you have a swim step, measure its depth separately. You will add this to the centerline length or keep it as a separate measurement for covers that include a swim step cover.
If it is difficult to measure your centerline length in a straight line, lay two boards on the dock or ground next to the boat. One board should be perpendicular with the tip of the bow and the other should be perpendicular with the center transom. Then, measure the length between the two boards.
Now you are ready to find your boat cover!
Visit us at:https://www.savvyboater.comhttps://www.facebook.com/sa...
Don’t forget to subscribe for more information on boat covers!