195
  • Rodger Cleye Horse Bike Riding May 2016

    4,154 views 9 months ago
    I wanted an easy to maintain horse. This is what I came up with. It is mostly made of Gorilla Tape. Its general shape was crafted from styrofoam. I modified a wal-mart bikes front forks to back-drive the front legs. Thanks for all the smiles, It has been a very positive experience for me! Show less
    Read more
  • Human Powered Vehicles Play all

    • Bike Riding Skeleton - Duration: 70 seconds.

      • 5 months ago
      • 78 views
      "Wishbone" the skeleton wasn't getting the attention he wanted when taking the back seat! His dream of riding in front was realized by moving the brakes and gears to the rear bars, that were also m...
    • Rodger Cleye Horse Bike Riding May 2016 - Duration: 66 seconds.

      • 9 months ago
      • 4,154 views
      I wanted an easy to maintain horse. This is what I came up with. It is mostly made of Gorilla Tape. Its general shape was crafted from styrofoam. I modified a wal-mart bikes front forks to back-dri...
    This item has been hidden
  • Custom Electric Vehicles Play all

    • Scout Trooper Bikespeeder (Segway base) - Duration: 86 seconds.

      • 2 years ago
      • 36,065 views
      When Ari Bayzid said he was going to get his hands on some quality scout trooper armor, I knew a bike speeder would complete the picture. Some PVC and and a Segway later, the vision became real. Sp...
    • Coconut Cruiser - Duration: 100 seconds.

      • 2 years ago
      • 3,140 views
      Electric vehicles are much more fun when shared with a companion. An electric wheelchair, some steel, a plastic wicker loveseat (for lighter transport), a 25 watt audio system and a dollar store co...
    • Rodger Cleye "Urban Cowboy" in Manhattan Beach 2015 on DIY Horse - Duration: 105 seconds.

      • 1 year ago
      • 1,097 views
      The horse was well received in Manhattan Beach on this memorial day weekend 2015. My kids love to ride it too -- whenever Dad gets off of it. My wife just thinks I'm nuts.

      How did I make it?

      I us...
    • RC Recliner - Duration: 94 seconds.

      • 3 years ago
      • 466 views
      It all started when I couldn't get rid of a recliner I had for sale at a garage sale. Once I put a motor on it, however, desire went up. I love it. I recently added a high power audio system with s...
    • Mobile Paradise - Duration: 64 seconds.

      • 4 years ago
      • 215 views
      This video was uploaded from an Android phone.
    • Gen2 Electric Unicycle - Duration: 3 minutes, 51 seconds.

      • 3 years ago
      • 1,195 views
      Turning actually requires a little bit of skill, making this more fun than a Segway. My favorite comment when riding this was "With enough work and determination you can aspire to FULL CLOWN STATUS...
    • LEVISKATE (BALANCING SKATEBOARD) IN OPERATION - Duration: 5 minutes, 30 seconds.

      • 3 years ago
      • 2,962 views
      Ben Smithers pioneered this mechanical implementation. This is my version. This gen 1 was proof of concept for me. It worked, but the feel was just not right. See my Feliz video for my generation 2...
    This item has been hidden
  • Robots Play all

    • Boba Fett Surprise (Pnuematic Rocket Man) - Duration: 81 seconds.

      • 2 years ago
      • 8,312 views
      I wanted to experiment with pnuematics. A fire extinguisher holds the necessary pressure delivered through the PVC system. The pressure is gated by a solenoid actuated sprinkler valve. The valve so...
    • Spirited Tree - Duration: 2 minutes, 23 seconds.

      • 3 years ago
      • 227 views
      This tree has been in many parades. It uses a Mr. Christmas music box to play music in sync with the carefully color positioned LED light strands. It has a magical quality and never fails to bring ...
    • Elvis and Barbie 24 Volt Radio Control Powerwheels hit the beach - Duration: 108 seconds.

      • 3 years ago
      • 1,524 views
      I am constantly improving my RC powerwheels. I can make them quiet or with insane power. My son loves the insane power ones that act as drifters. They can even burn-out at speed. Some models are b...
    • skully skateboarder dance - Duration: 26 seconds.

      • 3 years ago
      • 1,330 views
      This RC skateboarding skeleton always make people do a double-take. It is a Halloween favorite in my neighborhood with its beating heart and moving eyes. It is illuminated by near UV leds and custo...
    • Radio Control Flag Pole - Duration: 2 minutes, 4 seconds.

      • 3 years ago
      • 282 views
      My first submarine project. It uses differential trolling motors to push a flag pole through the water
    This item has been hidden
  • Multi-Rotor Projects Play all

    • Large Scale Advanced X1 Tie Fighter Quad-Copter - Duration: 41 seconds.

      • 2 years ago
      • 29,687 views
      I built this to "chase down" my X-wing tri-copter. It uses the same propulsion system as my Marty McFly project. Again, PVC construction of the frame was used. Each motor uses about 1HP!
      As usual, ...
    • Huge Radio Control X-wing Tri-copter (19lb, 5ft long) - Duration: 55 seconds.

      • 2 years ago
      • 18,343 views
      Three motors with 12" props pull 850W each to hover this monster tri-copter. A large servo direct-drives the tail motor gimble... that is actually the nose of the craft. 1/2 inch PVC pipe, screws, ...
    • X-WING TRI-COPTER (more flight time edit) - Duration: 49 seconds.

      • 2 years ago
      • 56,176 views
      Another look at how the x-wing tri-copter flies
    • Marty McFly H-Copter Hoverboard - Duration: 3 minutes, 1 second.

      • 3 years ago
      • 41,885 views
      This H-copter on steroids has an "all up" weight of 20lbs when you add the "Marty" mannequin and 13.4Ah 5S lipo battery. The chassis is made of 300PSI 1/2in PVC. Each motor can handle 1200W but onl...
    • Project Thunderball V2 (Heavy Lift Bicopter) - Duration: 3 minutes, 12 seconds.

      • 3 years ago
      • 11,271 views
      This is twin contra-rotating gimbled motor system configured as a bi-copter. This was done to provide a look and function more accurate to the movie. It was made from materials that are not normall...
    • Project Thunderball - Duration: 2 minutes, 50 seconds.

      • 3 years ago
      • 73,672 views
      The goal here is to recreate the portion of the movie "Thunderball" Where Sean Connery as 007 uses a Jetpack to escape the men chasing him. To achieve this, a super-size quad-copter had to be creat...
    • 2013 09 13 13 45 17 Thunderball V3 raw 1 - Duration: 52 seconds.

      • 3 years ago
      • 335 views
      V3 inverted H with James Bond mounted
    This item has been hidden
  • Science Play all

    This item has been hidden
  • Songs I Have Covered Play all

    • Me singing "Down" by Jay Sean - Duration: 2 minutes, 13 seconds.

      • 6 years ago
      • 1,459 views
      I usually post engineering videos to YouTube of things that I have built (see www.rodgersrobots.com). After hearing this very catchy song, and seeing so many talented people with their acoustic ve...
    • Me Singing "When You Say Nothing At All" (upbeat version) - Duration: 2 minutes, 54 seconds.

      • 6 years ago
      • 315 views
      I decided to re-make this one with different strumming throughout as opposed to the simple pluck pattern used in my first cover of this song.
    • Black Roses (Cover by Rodger Cleye) - Duration: 2 minutes, 55 seconds.

      • 2 years ago
      • 286 views
      Some songs are so moving I find myself picking up my guitar instead of tinkering on engineering projects for www.rodgersrobots.com. I first heard this song on the popular TV series Nashville and kn...
    • Me singing "When I Come Around" by Green Day - Duration: 2 minutes, 44 seconds.

      • 6 years ago
      • 200 views
      My friend asked if I would play something by Green Day. I always sung this one at the top of my lungs in the car, so I decided to look up the chords. It's quite fun to play and just goes G D Em C i...
    • Me singing "I'm gonna be (500miles) by the Proclaimers - Duration: 3 minutes, 2 seconds.

      • 6 years ago
      • 988 views
      This song has a way of drilling itself into your head. I got stuck in mine and I had to get it out, so here it is. Thanks for listening.
    • Me singing "When you say nothing at all" - Duration: 2 minutes, 50 seconds.

      • 6 years ago
      • 485 views
      I always have liked this song. I never really made the connection that it was only three chords with a rather straight forward finger pluck pattern to lift out the notes. Perhaps that is why I find...
    • Feliz Navidad - Duration: 84 seconds.

      • 3 months ago
      • 15 views
      By translating guitar chord fingerings to piano fingerings, I was able to play this on the piano with little extra effort. Thanks Josh (my son) for filming me. Merry Christmas Luminar!
    This item has been hidden
  • Songs By Me Play all

    This item has been hidden
to add this to Watch Later

Add to

Loading playlists...