• Uploads Play all

    • 3d Printed Rocketship Lamp - Duration: 72 seconds.

      • 1 week ago
      I created a Rocketship Lamp using an RGB Led Ring and ESP8266/Wemos D1 Mini board for wifi.

      It uses a 16 Led WS2812B 5V ring with OD of 45mm. There are several types available like Neopixels.

    • 3d Printed DMS Magnet - Duration: 16 seconds.

      • 2 months ago
      I bought a bunch of tiny magnets for another project and have several leftover. They are tiny and hard to pull off the metal sheet.

      I 3d printed a magnet holder with the Dallas Makerspace Logo on ...
    • Wood and Acrylic LED Lamp - Duration: 79 seconds.

      • 5 months ago
      This is a video of one of the FastLED demos running on my new lamp. It is made of acrylic and wood stacked and glued together. The lamp is controlled by an Arduino nano.

      The LEDs are WS2812b led s...
    • 10bitworks Laser Cutter Maintenance - Duration: 7 minutes, 5 seconds.

      • 5 months ago
      After replacing the laser tube, we needed to align and replace the mirrors and lens on the 80watt Rabbit Laser at the 10bitworks Makerspace in San Antonio.

      The mirrors are aligned by covering them...
    • Sienci Mill One Homing Cycle - Duration: 37 seconds.

      • 6 months ago
      I added some end stops or limit switches to my Sienci Mill One CNC Router. This is just a video of the router going through the homing cycle using Universal GCode Sender.

      After adding end stops to...
    • Testing Movement on Sienci Mill One CNC Router - Duration: 28 seconds.

      • 6 months ago
      I'm putting together a cnc router following the sienci mill one design. I 3d printed the parts on thingiverse, sourced the electronics myself, and made the frame, gantries, and rails at the 10bitwo...
    • 10Bitworks 2nd Saturday March 2018 360 video - Duration: 9 minutes, 3 seconds.

      • 1 year ago
      360 video of the 10Bitworks Makerspace in San Antonio, TX during our second saturday event
    • 10bitworks 2nd saturday

      • 1 year ago
      • No views
    • 10bitworks Makerspace San Antonio, TX - Duration: 5 minutes, 50 seconds.

      • 1 year ago
      A short walk around part of the warehouse at the 10bitworks Makerspace in San Antonio, TX
    • Palmetto State Park - Duration: 2 minutes, 9 seconds.

      • 1 year ago
      We camped at Palmetto State Park this weekend. It's a nice park an hour outside of San Antonio, with lots of plant life and some neat swampy areas.
    • The Creek at Lilac - Duration: 72 seconds.

      • 1 year ago
      I made some videos when I was taking pictures of stuff around the farm near Lilac.
    • ESP8266 WiFiDisplay Pt2 - Panel Design and Final Build - Duration: 6 minutes, 55 seconds.

      • 2 years ago
      Part 2 of the how to guide for using an ESP8266 Wemos D1 Mini board to control a 20x4 character i2c LCD to display a webpage.

      The ESP8266 can be programmed like an Arduino and even use the Arduin...
    This item has been hidden
  • Popular uploads Play all

    This item has been hidden
to add this to Watch Later

Add to

Loading playlists...