• Roadstercycle - Channel

    • 25 videos
  • SKYFIRECNC 5 Axis-Align Cut First Demo-Impeller Milling - Duration: 9 minutes, 50 seconds.

    • 9 months ago
    Hi guys, after months of development, SKYFIRECNC HHR-4 4" 5th axis kit has been developed successfully. This is an isolated 5th axis kit that can be attached to our HVR-6/8 4th axis set. This way, ...
  • DCTTeacher1 - Channel

    • 172 videos
    Welcome to the Design, Creativity and Technology Channel. I’m Aaron, a high school technology teacher from Melbourne Australia. I post regular videos showcasing all things engineering such as: machi
  • SVM 2VMC 4Cr13 SS milling demo - Duration: 96 seconds.

    • 1 year ago
    Hi guys. This is just a simple test video of SVM-2VMC milling stainless steel. The material is 4Cr13, a kind of hard SS. For a quick test before shipment to the buyer, I just did it without flood ...
  • SKYFIRE CNC Harmonic 5th axis Kit Prototype Idle Test - Duration: 105 seconds.

    • 1 year ago
    I recently developed this harmonic 4" 5th axis kit that can be attached to our 6" and 8" 4th axis set. This is the first prototype for demo. This video is the very first running on a customer's SVM...
  • 2017 New SVM-1S Steel Part milling Demo - Duration: 104 seconds.

    • 1 year ago
    The new SVM-S of 2017 has our own special designed MT3 taper spindle that be capable up to 10000rpm (standard order keeps 6000rpm and R8 taper spindle still available) and with less than 0.005mm to...
  • Skyfire SVM-2VMC Linuxcnc controlled steel gear milling - Duration: 5 minutes, 30 seconds.

    • 1 year ago
    This video is our first real cutting on a Linuxcnc+MESA card controlled machine. For easier cleaning after milling, we didn't use any coolant here. So please ignore the noise and slower feed rate:)...
  • svm 2vmc-atc dry milling and ATC demo for customer - Duration: 5 minutes, 11 seconds.

    • 1 year ago
  • SKYFIRE CNC SVM 2VMC linux+mesa 7i76e initial test - Duration: 52 seconds.

    • 1 year ago
    Hi guys. This video is still a very basic test with Linuxcnc and MESA board controller. But this time we turn to MESA 7i76e with Ethernet port that is easier to connect and very reliable. I will ke...
  • SKYFIRE CNC ATC-BT30-12T latest test video 1 - Duration: 106 seconds.

    • 1 year ago
    Here is our first time running newer version SKYFIRE ATC-BT30-12T test video. This ATC is our latest version with some detailed upgrades and moves smoother and faster. have been put into productio...
  • SVM-1S with Linux CNC+MESA Die Steel-D2 Mold Milling - Duration: 5 minutes, 22 seconds.

    • 1 year ago
    Here we milled a Cr12MoV(D2) steel mold for a test demo. We used a 8mm ball end carbide mill tool for both rough and finishing mill. And used a 0.3mm flat end carving tool to carve the words. Lin...
  • Skyfire SVM 1S with LINUX CNC&MESA Demo - Duration: 2 minutes, 20 seconds.

    • 1 year ago
    This is a customized SVM-1S machine with LINUX CNC and MESA 6i25+7i76 controller. The machine is equipped with AC SERVO spindle motor system and BT30 spindle. 3 axis driving is with closed loop ste...
  • SKYFIRE SVM-2VMC 2nd Spindle+4th Axis Engraving Demo-Venus Statue - Duration: 3 minutes, 48 seconds.

    • 1 year ago
    This video shows the result of our 2nd high speed engraving spindle and harmonic 4th axis set working together. We succefully made then 2nd spindle working together with the industrial controller....
  • skyfirecnc, svm-2, steel milling - Duration: 2 minutes, 56 seconds.

    • 1 year ago
    This is another demo of SVM-2VMC with industrial controller. Here we milled a steel gear sample of the ATC Geneva gears. The material is 42CrMo steel and it's pretty hard steel. We started at a low...
  • skyfirecnc, svm-2, atc, auto tool change - Duration: 5 minutes, 23 seconds.

    • 1 year ago
    This is another demo of SVM-2VMC Workstation with ATC. In this application we used totally 8 tools mostly different drill tools.
  • Skyfire SVM-2VMC Workstation ATC machining Demo - Duration: 3 minutes, 36 seconds.

    • 1 year ago
    This video shows a simple ATC application during an Al6061-T6 part milling. This machine is controlled by MACH3 so the ATC is controlled by a PLC, and the PLC communicates with MACH3 via MODBUS.

  • skyfire SVM-2VMC with 8" Harmonic Drive 4axis Idle Demo - Duration: 104 seconds.

    • 1 year ago
    We did this demo because a customer wants us to test his product milling before purchasing. This machine equipped with our new 8" harmonic drive 4th axis set and ATC. The CNC controller is MACH3 w...
  • SKYFIRE CNC SVM-2 mini VMC with Industrial controller Cutting Demo-Bruss part - Duration: 3 minutes, 21 seconds.

    • 2 years ago
    This is the first demo video of our SVM-2 mini VMC with 4 axis industrial controller. We cut a Geneva wheel for our ATC project. The max milling rpm in this video is 4000RPM and feed at 3000mm/min...
  • SKYFIRE CNC Harmonic Drive 4th Axis Milling Demo

    SKYFIRE CNC Harmonic Drive 4th Axis Milling Demo - Duration: 4 minutes, 40 seconds.

    • 2 years ago
    A simple milling demo of our harmonic drive 4th axis set. It's just a quick and simple demo to show the basic work with a 3-jaw chuck and tail stock. Next time we will make several complex demos.
  • SKYFIRE CNC Harmonic Drive 4th Axis Idle Demo

    SKYFIRE CNC Harmonic Drive 4th Axis Idle Demo - Duration: 37 seconds.

    • 2 years ago
    This is our newly developed harmonic drive 4th axis set demo. Harmonic drive is perfect for compact size 4th axis units with super accurate rotation and absolute ZERO backlash.

    error of division:...
  • skyfire cnc 2nd high speed spindle engraving on SVM-2P VMC Workstation

    SKYFIRE CNC SVM-2P-1 VMC Workstation 2nd Spindle Engraving Demo - Duration: 4 minutes, 14 seconds.

    • 2 years ago
    This is a simple demo of the 2nd high speed engraving spindle. It is attached to the spindle box and be easily added or removed. It shares the same VFD with 1st main spindle motor. Just a simple s...
  • SKYFIRE SVM-2P-1 CNC Workstation Steel Part Cutting Demo - Duration: 8 minutes, 40 seconds.

    • 2 years ago
    This time we made a simple program to show the steel cutting capability of the machine. As shown in the video, steel milling is still easy for it. The last finishing surface is very smooth. and di...
  • SKYFIRE SVM-2P-1 CNC Workstation Demo2-Cell Phone Model Cutting

    SKYFIRE SVM-2P-1 CNC Workstation Demo2-Cell Phone Model Cutting - Duration: 17 minutes.

    • 2 years ago
    This is the second demo we did on the new SVM-2P-1 CNC Workstation. Since this demo is a little complex amd we were busy so we separated the cutting steps to three days. We programmed a part of the...
  • New SKYFIRE CNC Workstation series demo video--SVM-2P-1 demo1-mouse model cutting

    New SKYFIRE SVM-2P-1 CNC Workstation DEMO1-Mouse Model Cutting - Duration: 15 minutes.

    • 2 years ago
    We developed the new SVM series CNC machines in 2016 and named them SKYFIRE CNC Workstations. This video shows the SVM-2P-1 type.

    SVM-2P-1 is equipped with full AC SERVO 3 axis motor system and ...
  • Please visit our website: www.skyfirecnc.com for more information.

    Skyfire SVM-1 3D Metal Engraving Demo1 - Duration: 8 minutes, 4 seconds.

    • 3 years ago
    A slave spindle device can be installed to Skyfire SVM1/2 series CNC machine head to expand machine applications. SVM machine head has a standard slot on the left side to make sure the slave spindl...
  • 替影片加上訊息

    SKYFIRE SVM-1 High Speed Aluminium Cutting Demo - Duration: 15 minutes.

    • 3 years ago
    This video is a demo of high speed Aluminium material cutting. SVM1 runs this program easily with 2200W BLDC spindle power and SERVO axis driving. Quick Tool Changing system makes user operate fast...
  • 替影片加上訊息

    SKYFIRE SVM-1 High Speed Steel Cutting Demo - Duration: 13 minutes.

    • 3 years ago
    We cut a spanner model in this video to show that SVM-1 is super rigid and powerful even when dealing with steel parts at high speed.

    Please visit our website: www.skyfirecnc.com for more informa...
  • svm2 demo1 - Duration: 51 seconds.

    • 4 years ago
  • svm2 demo2 - Duration: 84 seconds.

    • 4 years ago
  • 自定义您的讯息

    skyfire cnc machining demo1 - Duration: 3 minutes, 4 seconds.

    • 5 years ago
  • 自定义您的讯息

    skyfire cnc machining demo2 - Duration: 4 minutes, 34 seconds.

    • 5 years ago
  • 自定义您的讯息

    skyfire cnc mass material removing demo - Duration: 4 minutes, 31 seconds.

    • 5 years ago
  • 自定义您的讯息

    skyfire cnc accuracy detection - Duration: 82 seconds.

    • 5 years ago
  • 自訂您的訊息

    skyfire cnc panel engraving test - Duration: 2 minutes, 35 seconds.

    • 5 years ago
to add this to Watch Later

Add to

Loading playlists...