416
  • Mechaduino 0.1 Hackaday Prize 2016 - Duration: 2 minutes, 1 second.

    • 2 years ago
    • 8,339 views
    Mechaduino is an affordable, open-source, industrial servo motor. Position, torque, velocity, and custom modes. Arduino compatible.

    More info available here:
    hackaday.io/project/11224-mechaduino
    ...
    • CC
  • Mechaduino Step/Dir Demo - Duration: 4 minutes, 22 seconds.

    • 2 years ago
    • 8,033 views
    In this demo, we will show how to use a
    Mechaduino 0.1 with the popular RAMPS 1.4 3D
    printer controller using the Step/Dir interface.
  • Mechaduino Automated Clamping - Duration: 15 seconds.

    • 2 years ago
    • 2,077 views
    Here's an automatic vise that we put together to help automate the Mechaduino assembly process. For each motor we need to replace the stock screws with our custom screws/standoffs. This fixture h...
  • We've Launched a Kickstarter for Mechaduino!

    Mechaduino 0.1 Kickstarter Video - Duration: 113 seconds.

    • 2 years ago
    • 8,548 views
    Mechaduino is an affordable, open-source, industrial servo motor. Position, torque, velocity, and custom modes. Arduino compatible.

    www.kickstarter.com/projects/tropicallabs/mechaduino-powerful-o...
    • CC
  • Mechaduino Dispenser Demo - Duration: 34 seconds.

    • 2 years ago
    • 1,626 views
    This is primarily a demo of the Mechaduino servo motor. This novel bathroom appliance is a good way to show off the mult-mode capabilities (specifically force sensing, position control, and profi...
  • Closed Loop 3D printer w/ Mechaduino - Duration: 55 seconds.

    • 2 years ago
    • 21,197 views
    Demonstration of a rep rap Prusa with closed loop position control.

    A Mechaduino servo motor can be used as a drop in replacement for each stepper motor and stepper driver.

    Closed loop control me...
  • Mechaduino Robot Arm Demo - Duration: 36 seconds.

    • 2 years ago
    • 2,413 views
    A quick demo of a work-in-progress robot arm that uses a mechaduino closed loop servo motor. Arm will eventually have 5 DOF.
  • Mechaduino Calibration Routine - Duration: 47 seconds.

    • 2 years ago
    • 2,187 views
    Demonstration of the encoder calibration routine
  • Coffee Maker Delta Printer - Duration: 26 seconds.

    • 2 years ago
    • 19,775 views
    Built on a coffee maker. And on a budget. No precision rails or bearings. True Delta Kinematics. Great prints.
  • Mechaduino: Mode Demonstration - Duration: 2 minutes, 8 seconds.

    • 2 years ago
    • 12,265 views
    Demo of position, velocity and torque loops on closed loop stepper motor.
  • Electronic Gearing Demo 2 - Duration: 22 seconds.

    • 2 years ago
    • 887 views
    This second demo is easier to see with the pointers. Unfortunately the position loops are not tuned as well as in the other video.

    Implemented with analog setpoints and two motors:
    M1 position -- ...
  • Electronic Gearing Demo (for haptics, etc.) - Duration: 17 seconds.

    • 2 years ago
    • 1,993 views
    Implemented with analog setpoints and two motors:
    M1 position -- to -- M2 setpoint
    M2 position -- to -- M1 setpoint

    It works! Could use some filtering to remove noise, but not bad for
    first attemp...
  • Tropical Labs TP dispenser - Duration: 10 seconds.

    • 2 years ago
    • 720 views
    A quick demonstration of the multi-mode motion control operations possible with the Mechaduino servo motor.
  • mechaduino x,v,t control (long) - Duration: 3 minutes, 41 seconds.

    • 2 years ago
    • 3,066 views
    Demo of position, velocity and torque loops on closed loop stepper motor.
to add this to Watch Later

Add to

Loading playlists...