19,253
  • Uploads Play all

    • Downdraft Table | Dust Collection | MakerMan - Duration: 10 minutes.

      • 2 months ago
      • 3,129 views
      This is a project custom made for jewelry box making factory. They make a lot of boxes which requires lots of sanding. This downdraft table collects all the dust while sanding and routing. this pro...
    • Aquaponics Furniture | Home-Made | MakerMan - Duration: 6 minutes, 51 seconds.

      • 2 months ago
      • 687 views
      This project was made by keeping the aesthetics of a furniture and the practicality of an aquaponics system, most of the DIY aquaponics system consists of lots of wires and pipes which is not somet...
    • DiY Telepresence Rover with Huawei Mate 20 Pro | iot project # 5 | MakerMan - Duration: 9 minutes, 5 seconds.

      • 6 months ago
      • 3,234 views
      This is a telepresence rover, i just made which can be controlled through blynk and uses skype for the video feed. i have made many such telepresence rover, this would be 6th version.
      This video i...
    • Band Saw Restoration | MakerMan - Duration: 6 minutes, 59 seconds.

      • 7 months ago
      • 840 views
      I got this BandSaw from my local junkyard. It was missing the work table which i fabricated. The motor mount was not aligned as the blade was slipping often and the rubber rim was also missing, it ...
    • PSP Restoration , I got it for 2$ | MakerMan - Duration: 7 minutes, 13 seconds.

      • 9 months ago
      • 12,377 views
      I got a PSP 1001 for 2$ from my local flea market, i decided to clean it up. I did a complete teardown and rebuild on it. the housing of the psp was order from china. it took an hour to finish.

      LO...
    • Kinetic Moving Chandelier | MakerMan - Duration: 6 minutes, 15 seconds.

      • 10 months ago
      • 4,276 views
      This was a prototype project of a moving chandelier developed for a client. The structure of the chandelier is an origami flower. There is a geared stepper motor controlled with an arduino to move ...
    • Wooden YouTube Playbutton | Thank you 10000+ Subscribers | MakerMan - Duration: 4 minutes, 26 seconds.

      • 11 months ago
      • 682 views
      This is a video that i made for my 10000+ subscribers milestone. Its made out of wood laying around. I will be making play buttons with different materials, when i hit my future milestones. Next wo...
    • Laser Cutter Restoration with an arduino | MakerMan - Duration: 7 minutes, 2 seconds.

      • 1 year ago
      • 11,132 views
      I found a 14 year old laser cutting from the junkyard. The machine is 350kg , so a crane was used bring it to my home. It had missing laser tube, power supply, air-blower, compressor, water cooler ...
    • DIY Mini Power Wall | MakerMan - Duration: 6 minutes, 34 seconds.

      • 1 year ago
      • 44,827 views
      Made my first power wall using old laptop battery which are new battery but from an older model laptops. This is my first experiment to power wall builds. The whole build took few hours. Next would...
    • WiFi Home Door Lock| Blynk | iot project # 4 - Duration: 5 minutes, 50 seconds.

      • 1 year ago
      • 385,216 views
      To see My latest iot project, link below https://youtu.be/BTQvjaebseY
      ------------------------------------------------------------------------

      Here in this video, I added wifi to our home main doo...
    • Diy Custom Desk PC | The Ryzen Build | MakerMan - Duration: 10 minutes.

      • 1 year ago
      • 13,716 views
      i upgraded my PC for better video rendering, i went with the AMD Ryzen 7 as it has more performance to price ratio. I made a custom desk for the PC with a removable setup like a drawer. So i can ta...
    • DIY Laser engraving CNC | Part 2 | OPT Lasers | MakerMan - Duration: 5 minutes, 29 seconds.

      • 1 year ago
      • 10,212 views
      Here is the part 2 video of the laser cnc i made a few weeks ago, this video show some of the many things that can be done with this laser cnc. The laser module is PLH3D-6W-XF which is a profession...
    This item has been hidden
  • Popular uploads Play all

    • DIY X-Carve build for $170 | CNC | Part 1 - Duration: 10 minutes.

      • 2 years ago
      • 690,153 views
      Win your new 10watt, 8.5watt or 0.5watt laser module in a new giveaway
      https://goo.gl/1oWYRU


      To watch My latest Metal engraving Laser CNC, go to. https://youtu.be/Vjrh4fSkfWs
      -------------------...
    • WiFi Home Door Lock| Blynk | iot project # 4 - Duration: 5 minutes, 50 seconds.

      • 1 year ago
      • 385,216 views
      To see My latest iot project, link below https://youtu.be/BTQvjaebseY
      ------------------------------------------------------------------------

      Here in this video, I added wifi to our home main doo...
    • Diy Vertical wind turbine | harvesting the wind | MakerMan - Duration: 7 minutes, 11 seconds.

      • 2 years ago
      • 346,908 views
      VAWT
      this project is an addition to my solar energy system, which i made few months ago. this is my first attempt on wind turbines. for my next wind energy project, i am planing to make a highly e...
    • CNC Build From Scratch for 50$ | x-carve Inspired | MakerMan - Duration: 10 minutes.

      • 1 year ago
      • 188,542 views
      To watch My latest Metal engraving Laser CNC, go to.
      https://goo.gl/V1o2tS

      -------------------------------------------------------------------------------
      For business enquiry
      email me at mustangc...
    • DIY X-Carve build for $170 | CNC | Part2 - Duration: 6 minutes, 39 seconds.

      • 2 years ago
      • 139,512 views
      Win your new 10watt, 8.5watt or 0.5watt laser module in a new giveaway
      https://goo.gl/1oWYRU


      To watch My latest Metal engraving Laser CNC, go to.
      https://goo.gl/V1o2tS

      -------------------------...
    • DIY Bench press - adjustable | bodybuilding - Duration: 2 minutes, 24 seconds.

      • 6 years ago
      • 84,692 views
      DIY Bench press - adjustable

      incline , flat , decline press

      If someone wants an exclusive Skype or Whatsapp with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.co...
    • HomeMade Weighing Scale Machine | Arduino Project #4 - Duration: 7 minutes, 48 seconds.

      • 1 year ago
      • 69,321 views
      ​Here is the video of the whole build process, where i start with constructing the frame for the weighing scale and to the end integrating arduino. the scale is simply powered by an old power bank....
    • DIY Metal engraving 6watts Laser CNC | OPT Lasers | MakerMan - Duration: 13 minutes.

      • 1 year ago
      • 64,633 views
      Here is a laser cnc i made which can engrave materials like Stainless steel, Painted metal, wood and etc. this laser has the power to cut acrylic also. The laser module is PLH3D-6W-XF professional...
    • A Bench Grinder Restoration | MakerMan - Duration: 5 minutes, 15 seconds.

      • 2 years ago
      • 55,612 views
      i got the grinder from junkyard. it was missing a tool rest and was rested. a bit sanding and some paint gave it a new life in my workroom.

      See some of my other Restoration down below:-

      1) Band ...
    • DIY Mini Power Wall | MakerMan - Duration: 6 minutes, 34 seconds.

      • 1 year ago
      • 44,827 views
      Made my first power wall using old laptop battery which are new battery but from an older model laptops. This is my first experiment to power wall builds. The whole build took few hours. Next would...
    • WiFi Controlled Home Gate | iot project # 3 - Duration: 6 minutes.

      • 1 year ago
      • 41,271 views
      My latest iot project https://youtu.be/BTQvjaebseY


      In this video I added wifi to our home main gate with esp8622 module. the remote control didn't have enough range most of the times, so we alway...
    • Tiling on extremely uneven floor | DIY - Duration: 7 minutes, 27 seconds.

      • 2 years ago
      • 35,150 views
      The garage floor was very uneven so i tiled it, because most of the big project was problem to work on this uneven floor when it comes welding and all. So i finally decided to tile the floor. now i...
    This item has been hidden
to add this to Watch Later

Add to

Loading playlists...