112
  • Ruger Mark IV Is Back From Recall - Duration: 3 minutes, 36 seconds.

    • 1 year ago
    • 4,769 views
    The Ruger Mark IV went thru the recall process and here is how it turned out. I must give Ruger a thumbs up for being a company that stands behind the safety of its customers and did the fix in a...
  • Ruger Mark IV Recall How To Test - Duration: 8 minutes, 17 seconds.

    • 1 year ago
    • 18,946 views
    This video shows you how to test your Mark IV 22/45 and how to and where to get it repaired if it is on the list. If you purchased a Mark 4 prior to June 1st 2017 you have a unsafe pistol.

    Ruger R...
  • How to Repair a Windshield Chip or Crack - Duration: 6 minutes, 1 second.

    • 4 years ago
    • 10,086,234 views
    DIY Windshield Repair. This is a how to fix your chipped windshield. If you do not do this as soon as possible the chip can turn into a crack overnight! It is easy and costs $10... A repair place w...
    • CC
  • This Superman logo was pulled from the internet as a DXF file. I cleaned the image a bit in CorelDraw, then sent the file to LaserCut 5.3. I set the speed to a fast value of 200mm/Sec... and turned the cutting power to 50 percent (60 watts max). The logo cuts smooth and absolutely repeatable.

    Superman Logo Cut Out of 320 Grit Sandpaper - Duration: 43 seconds.

    • 4 years ago
    • 1,605 views
    This Superman logo was pulled from the internet as a DXF file. I cleaned the image a bit in CorelDraw, then sent the file to LaserCut 5.3. I set the speed to a fast value of 200mm/Sec... and turn...
  • This Superman logo was pulled from the internet as a DXF file. I cleaned the image a bit in CorelDraw, then sent the file to LaserCut 5.3. I set the speed to conservative value and turned the cutting power to 50 percent (60 watts max). The logo cuts pretty smooth and absolutely repeatable.

    Superman Logo cut from solid wood - Duration: 95 seconds.

    • 4 years ago
    • 2,490 views
    This Superman logo was pulled from the internet as a DXF file. I cleaned the image a bit in CorelDraw, then sent the file to LaserCut 5.3. I set the speed to conservative value and turned the cut...
  • The easy guide on installing the software to your import laser.

    Install Drivers And LaserCut 5.3 App - Duration: 6 minutes, 8 seconds.

    • 4 years ago
    • 20,618 views
    Installing the laser machine drivers and the LaserCut 5.3 application software. A step-by-step guide on installing and verifying the process completed correctly.
  • Rabbit Laser USA General Items - Duration: 112 seconds.

    • 4 years ago
    • 2,764 views
    A display of general items that can be made with laser machines from Rabbit Laser USA.
  • We want to take this opportunity to show some of the abilities for how laser engraver/cutter machines can act on wood.

    Rabbit Laser USA Wood Exmples - Duration: 77 seconds.

    • 4 years ago
    • 1,733 views
    We want to take this opportunity to show some of the abilities for how laser engraver/cutter machines can act on wood.
to add this to Watch Later

Add to

Loading playlists...