tobimc89's channel

Little demo of my Thermometer(!) for the FrancisFrancis X1 espresso machine. This is NOT a controller. Project log:

http://www.tobias-schlegel.......

Products Featured in this Video:

ArduIMU+ V3: http://www.sparkfun.com/pro...

SMD LED - 0603 Green (strip of 50): http://www.sparkfun.com/p...

Award winning 20-Minute Meals is available on Android. Find out more and download at http://www.jamieoliver.com/...

I show how to make a simple circuit to power up and down arcade machine. This will save power and unnecessary wear and tear.

What's in Dave's Mailbag?

Send to:

PO Box 7949

Baulkham Hills BC

Baulkham Hills NSW 2153

AUSTRALIA

NOTE: The PO Box isn't big. A4 letter size x ma...

Short video I promised showing off my DIY hot air station.

Sorry for the delay, I had to completely redesign the heater.

For the Hot air station p...

Milling some aluminium using my CNC machine, a step Four Basic 540

2mm material,

2mm flat tip bit

0,5mm/pass

200mm/min feed rate

25000rpm

10° dive...

Demonstration of my (new) LCDmenu library for AVR.

The library facilitates the implementation of LCD-menus for dotmatrix-LCDs on AVR-based (WinAVR)...

Sory for the bad quality, and thanks Tim for filming.

Flying the [extreme] sport wing.

For more information : http://www.tobias-schlegel....

I bulit a tool length sensor for my CNC, and this is the first test...

I designed a PCB for my inline-skates, to switch on some lights when it gets dark etc, and needed a prototype. I was faaaar to lazy to come up with...

Some ARM7-Experiment...

Music by Pete Green, who hasn't got a myspage...

http://www.tobias-schlegel.de

Bad quality, but the text runs.

The led-display-unit is a Kingbright TA12-11HWA. The electronics are attached to the backside. For more information...