diyengineer's channel
Loading...
278
subscribers
120,006
video views
Uploaded videos
1-10 of 120-
Cnc Rebuild Video #91
diyengineer
703 views
Prototype cut from foam. 2 flute carbide. Going to eventually be 2 pieces, and bolt around the spindle to hold the spring loaded sheet metal hold down that will prevent thi...
-
Cnc Rebuild Video #90
diyengineer
843 views
New Dust and chip collection Vac.
-
$500 Atlas Copco Pneumatic Drills LBL25
diyengineer
801 views
For SALE *5* (FIVE) Atlas Copco Self Feed Pneumatic drills. (Made is Sweden) $500 USD takes ALL 5. I accept paypal only. (Each one is worth $500+)
They run on shop air,...
-
Cnc Rebuild Video #89
diyengineer
719 views
Single sided Vacuum Jig. Will use 1/4-20 square nuts inserted into HDPE, then sealed for vacuum. 12"x12" for small projects. Vacuum gasket, and nuts are not shown.
-
Cnc Rebuild Video #88
diyengineer
568 views
Trammed! :) http://www.eztram.com/product_results.asp?ID=16 http://littlemachineshop.com/products/product_view.php?view=classic&ProductID=3651
-
Cnc Rebuild Video #87
diyengineer
457 views
Found that the drive bearings on the Left and Right side of the gantry are "spinning" inside the hole. The outside of the bearing is suppose to have an interference fit and...
-
Cnc Rebuild Video #86
diyengineer
734 views
New endmills, HDPE, and electro-magnetic sheet metal bender. I would like to "finish" this machine up before i hit 100 videos! :)
-
Cnc Rebuild Video #85
diyengineer
592 views
My X axis driver (the top one pictured in the video) is giving me a red light when i jog the axis. I use to be able to jog the axis at 700ipm with no problems. Now for some...
-
Cnc Rebuild Video #84
diyengineer
904 views
Almost figured out the Safety charge pump! Now i just need to get it out of this rut! The safety i believe is seeing the error outputs of the drivers because they lack 120V...
-
Cnc Rebuild Video #83
diyengineer
1,543 views
Using Mach 3 with modbus and a brain to control a hitachi x200 and 2.2KW chinese watercooled spindle.
You will find all the info you need in the 2 links below.
Mach 3 "hi...
Play all(120)