Subscription preferences
Adafruit Industries
Adafruit Product Demos
-
1
1:12
Sewable GPS Module - Adafruit FLORA Wearable Ultimate GPS
by Adafruit Industries 3,730 views
FLORA Wearable Ultimage GPS Module: http://www.adafruit.com/products/1059
This module is the best way to add a GPS to your wearable project. It's part of the Adafruit Flora series of wearable electronics, designed specifically for use with the Flora motherboard. Installed on the PCB is the latest of our Ultimate GPS modules, a small, super-thin, low power GPS module with built in data-logging capability! This module's easy to use, but extremely powerful.
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
FLORA tutorials: http://learn.adafruit.com/category/flora
Buy FLORA: http://www.adafruit.com/category/92
----------------------------------------- -
2
0:53
HEY HAL!
by Adafruit Industries 74,357 views
Build your own affordable HAL 9000 Replica: http://learn.adafruit.com/hal-9000-replica
Why yes, Dave. As a matter of fact I CAN do that.
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
----------------------------------------- -
3
7:25
Plush Game Controller with Flora & Conductive Fabric
by Adafruit Industries 17,514 views
Make an oversize plush game controller that actually works! Use conductive fabric and a Flora board to stitch up a capacitive touch sensing circuit. The controller acts like a computer keyboard, allowing you to play all your favorite old school games on emulator sites online. Becky Stern shows you how to put it all together.
This is an all-sew project with no batteries, making it great for beginners and even kids to try. Build your own: http://learn.adafruit.com/plush-game-controller/
Special assistance creating this project provided by Risa Rose.
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
4
1:30
Bare Conductive Paint
by Adafruit Industries 7,224 views
Becky Stern explores Bare Conductive paint and plays Pac Man with painted buttons connected to a Flora.
Bare Conductive paint pen: http://www.adafruit.com/products/1306
Bare Conductive greeting card kit: http://www.adafruit.com/products/1307
50mL Bare Conductive paint: http://www.adafruit.com/products/1305
Bare Conductive Paint is a multipurpose electrically conductive material perfect for all of your DIY projects! Bare Paint is water based, nontoxic and dries at room temperature.
Bare Paint is the first non-toxic electrically conductive paint available to consumers today. This unique child-friendly material is designed for people of all ages to explore and learn about electronics with an inclusive, easy-to-use material.
Bare Paint provides a dramatically different method of interacting with electronics as it can be applied to almost any surface, including cardboard, paper, wood, wallpaper, walls, textiles, and some plastics.
Bare paint can be used to replace conventional acid etching, making it a great electronics prototyping tool. Nontoxic and water-soluble, Bare Paint can be used without gloves or mask. The paint dries quickly at room temperature, and can be removed with soap and water. This means it's also not water-proof or weather-resistant!
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
5
1:06
Flora Lux Sensor - Wearable Light Sensing
by Adafruit Industries 4,271 views
Stitch up yours today: http://learn.adafruit.com/flora-lux-sensor/
Add light-reactive sensing to your wearable Flora project with this high precision Lux sensor. The TSL2561 luminosity sensor is an advanced digital light sensor, ideal for use in a wide range of light situations. Compared to low cost CdS cells, this sensor is more precise, allowing for exact lux calculations and can be configured for different gain/timing ranges to detect light ranges from up to 0.1 - 40,000+ Lux on the fly. The best part of this sensor is that it contains both infrared and full spectrum diodes! That means you can separately measure infrared, full-spectrum or human-visible light. Most sensors can only detect one or the other, which does not accurately represent what human eyes see (since we cannot perceive the IR light that is detected by most photo diodes).
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
6
8:27
Flora Brake Light Backpack
by Adafruit Industries 26,120 views
Becky Stern shows you how to wire up your very own backpack-mounted LED display for animating turn signals and accelerometer-activated brake lights for motorcyclists. Full details: http://learn.adafruit.com/flora-brakelight-backpack
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
7
1:19
Flora Accelerometer - Wearable Motion Sensing!
by Adafruit Industries 5,630 views
Stitch up yours today: http://learn.adafruit.com/flora-accelerometer/
Add motion and direction sensing to your wearable Flora project with this high precision 3-axis Accelerometer+Compass sensor. Inside are two sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity) or how fast the board is accelerating in 3D space. The other is a magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north. By combining this data you can then orient yourself.
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
8
6:08
Super Bowl Glowing Helmets
by Adafruit Industries 7,567 views
Becky Stern shows you how to emblazon your team's logo in electroluminescent panel-- Get supplies for your next EL project at Adafruit: https://www.adafruit.com/category/50
Illustrator plugin for Silhouette machine:
http://graphtecamerica.com/support/legacy/support_cc330_drivers-downloads.html
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
http://learn.adafruit.com/wearable-piezo-tones-with-flora9
1:06
Wearable Piezo Tones with Flora
by Adafruit Industries 6,054 views
Becky Stern make her clothes play a song: http://learn.adafruit.com/wearable-piezo-tones-with-flora/
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
10
5:20
Conductive Thread - 10 Tips
by Adafruit Industries 8,752 views
Sew with STEEL! Becky Stern shares her tips & techniques: http://learn.adafruit.com/conductive-thread/
Sewable LED Sequins: http://www.youtube.com/watch?v=XpwL71IiPXM
Flora with Snaps: http://www.youtube.com/watch?v=dDwmnfpjlno
iPhone Gloves with Conductive Yarn: http://www.youtube.com/watch?v=ljN1vObUa5E
TV-B-Gone Jacket: http://www.youtube.com/watch?v=vVJDlxabv0w
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
-----------------------------------------
Additional sound effects by Benboncan on freesound: http://www.freesound.org/people/Benboncan/sounds/78250/ -
11
4:06
Flora with Snaps
by Adafruit Industries 4,176 views
Solder snaps to your Flora to make it easily removable! http://learn.adafruit.com/flora-snaps
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
12
2:41
TIMESQUARE DIY Watch Kit
by Adafruit Industries 12,007 views
Pick up this unique time piece at Adafruit: http://adafruit.com/products/1106
Complete assembly instructions: http://learn.adafruit.com/timesquare-watch-kit
64 LEDs light up to tell you the time in a variety of ways. Built into the kit are 3 different watch 'faces' - a scrolling marquee with time and date, a binary watch display (for geeks, robots and binary fans), and a moon phase display (for beach-combers, werewolves). There's also a built in battery meter so you can check your battery life. Want to make your own watch? Easy! The microcontroller is an Arduino-compatible, all you need is an FTDI Friend and the Arduino IDE and you can design your own watch faces and upload them to the TIMESQUARE.
Engineered for greatness by PaintYourDragon, this watch squeezes 500-1000 full time displays out of a coin battery, and a up to one year 'resting' lifetime, so you can use this as a day-to-day time keeper.
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
13
1:03
315Mhz Remote and Receivers
by Adafruit Industries 7,997 views
Keyfob RF Remote Control - 315MHz: http://adafruit.com/products/1095
Simple RF M4 Receiver - 315MHz Momentary Type: http://adafruit.com/products/1096
Simple RF T4 Receiver - 315MHz Toggle Type: http://adafruit.com/products/1097
Simple RF L4 Receiver - 315MHz Latching Selector Type: http://adafruit.com/products/1098
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
----------------------------------------- -
14
3:54
Flora Pixel Brooch
by Adafruit Industries 5,451 views
Make a color-changing LED pin-on accent for your shirt, bag, or jacket with FLORA! Becky Stern shows you how: http://learn.adafruit.com/flora-pixel-brooch/
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
----------------------------------------- -
15
0:31
Piccolo Music Visualizer
by Adafruit Industries 14,745 views
Maximum blinkenlights, minimum effort! This easy project combines an Arduino with our microphone amplifier and bicolor LED matrix to create a music visualizer that responds to ambient sound. http://learn.adafruit.com/piccolo
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
----------------------------------------- -
16
5:15
Conductive Fiber with MaKey MaKey
by Adafruit Industries 24,236 views
Use conductive fiber to felt a Bananaphone and play music with the MaKey MaKey! http://adafru.it/bananaphone
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
----------------------------------------- -
17
2:10
Deluxe USB Microscope
by Adafruit Industries 8,151 views
Aluminum USB Microscope with Precision Stand: http://adafru.it/1061
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
----------------------------------------- -
18
4:42
Electronic Demon Costume - How To!
by Adafruit Industries 84,491 views
Electronic Demon Costume by Phil Burgess - mashup of animating multiple LED backpacks: http://learn.adafruit.com/animating-multiple-led-backpacks
and the Wave Shield Voice Changer: http://learn.adafruit.com/wave-shield-voice-changer
Code: https://github.com/adafruit/adavoice
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
----------------------------------------- -
19
2:08
MaKey MaKey Monday - Fruit drum kit
by Adafruit Industries 3,273 views
MaKey MaKey by Jay Silver and Eric Rosenbaum - Made by JoyLabz: https://www.adafruit.com/products/1068
Tom tests out the fruit drum kit and Matt eats a banana! -
20
0:34
Electronic Halloween! Animating Multiple LED Backpacks
by Adafruit Industries 7,818 views
Animating Multiple LED Backpacks
Lights! Action! MORE LIGHTS! MORE ACTION!
http://learn.adafruit.com/animating-multiple-led-backpacks -
21
2:07
Electronic Halloween voice changer with Phil Burgess
by Adafruit Industries 17,050 views
http://www.adafruit.com/products/1063
http://learn.adafruit.com/wave-shield-voice-changer
Electronic Halloween voice changer with Phil Burgess! -
22
1:25
Pi Holder Aluminum Case for Raspberry Pi
by Adafruit Industries 18,974 views
https://www.adafruit.com/products/1036
This gorgeous and indestructable Raspberry Pi™ Case is as awesome as it is functional. Made in the U.S.A. by Barch Designs from Solid 6061-T6 Aircraft Grade Billet Aluminum which protects your Raspberry Pi from damage and also keeps your Pi running extra-cool by acting as a thermal heat sink (Please note: heat sinking is not required to use the Pi, but some people like having their Pi run cold)
The Pi Holder case is milled by Barch Designs on a CNC machine to exact tolerances. This allows just enough room for the Raspberry Pi to slide down into the case. Any bigger and the Pi would be loose and any smaller it would bind up.
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
23
1:36
Brush with Genius - Music-Making Paintbrush
by Adafruit Industries 3,695 views
http://www.adafruit.com/products/1035
Made a Drawdio but still want more? This fully-assembled kit contains Drawdio innards as part of a big plastic brush so it acts like a half-theramin/half-paintbrush. When painting, the conductivity of the watercolors changes the sound pitch that comes out of the little speaker in the brush.
Can be used on most surfaces with just water—no paints required!
NOTE: 2 AAA Batteries Required (Not Included).
Ages: 3 and up. -
24
1:06
Touch Wheel Controller for Analog RGB LED Strips
by Adafruit Industries 6,265 views
http://www.adafruit.com/products/1005
-
25
1:07
Ladyada's "E is for Electronics" Coloring Book
by Adafruit Industries 10,110 views
http://adafruit.com/coloringbook
http://adafruit.com/products/1000
Ladyada's "E is for Electronics" is a coloring book adventure with electronic components and their inventors.
Makers of all ages can learn, color, and share common parts and historical figures throughout history. Explore the world of electronics with Ladyada as your guide!
Here's an excerpt:
"A diode lets electrons flow in only one direction. It works like a switch: when current is flowing one way, the switch is on, but when current tries to flow the other way, the switch turns off. Sir John Ambrose Fleming is best known for inventing the diode, originally called the kenotron."
Coloring book dimensions: 8.5in x 5.5in
MADE IN THE USA!
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
26
5:36
NO MAN'S LAND: DIY LED Lights
by Digs 4,136 views
Shelly and Anna install LED lights in their kitchen with help from special guest Becky of Adafruit Industries.
Subscribe to DIGS! http://www.youtube.com/digs
DIG us on twitter, tumblr, & facebook!
http://twitter.com/digschannel
http://digschannel.tumblr.com/
http://www.facebook.com/DIGSchannel -
27
1:08
Ladyada demoing Heart Rate Receiver and Transmitter
by Adafruit Industries 4,816 views
Ladyada demoing Heart Rate Receiver and Transmitter
http://www.adafruit.com/products/1016
http://www.adafruit.com/products/1017 -
28
1:24
Articulated Arm Stand for USB Microscope
by Adafruit Industries 3,977 views
http://adafruit.com/products/969
We love pulling out our 5 Megapixel USB microscope for inspecting PCBs once in a while, but we really got to use it every day when we picked up this beautiful machined aluminum 3D stand. It has multiple articulated 'joints' for positioning the microscope in any way and is very sturdy and solid with a large flat base.
A single hand-friendly knob is used to loosen all the joints for positioning, then tighten it up to fix the position. The microscope is clamped in solidly but it can easily be removed by releasing the clasp for hand positioning when you need it. This is the best stand available for this microscope and it makes an excellent companion!
This is just a microscope stand, a USB microscope is not included! Please check out our 5MP USB Microscope in the shop to pick up a matching microscope: http://adafruit.com/products/636 -
29
0:11
Adafruit 4-Digit 7-Segment Display w/I2C Backpack
by Adafruit Industries 8,657 views
http://www.adafruit.com/products/879
What's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix or a 4-digit 7-segment display. Matrices like these are 'multiplexed' - so to control all the seven-segment LEDs you need 14 pins. That's a lot of pins, and there are driver chips like the MAX7219 that can control a matrix for you but there's a lot of wiring to set up and they take up a ton of space. Here at Adafruit we feel your pain! After all, wouldn't it be awesome if you could control a matrix without tons of wiring? That's where these adorable LED matrix backpacks come in. We have them in two flavors - a mini 8x8 and a 4-digit 0.56" 7-segment. They work perfectly with the matrices we stock in the Adafruit shop and make adding a bright little display trivial. -
30
0:11
Adafruit Mini 8x8 LED Matrix w/I2C Backpack - Red
by Adafruit Industries 10,915 views
http://www.adafruit.com/products/870
What's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix or a 4-digit 7-segment display. Matrices like these are 'multiplexed' - so to control 64 LEDs you need 16 pins. That's a lot of pins, and there are driver chips like the MAX7219 that can control a matrix for you but there's a lot of wiring to set up and they take up a ton of space. Here at Adafruit we feel your pain! After all, wouldn't it be awesome if you could control a matrix without tons of wiring? That's where these adorable LED matrix backpacks come in. We have them in two flavors - a mini 8x8 and a 4-digit 0.56" 7-segment. They work perfectly with the matrices we stock in the Adafruit shop and make adding a bright little display trivial. -
31
2:00
Pi Dish for Raspberry Pi by Adafruit
by Adafruit Industries 23,274 views
Attach a Raspberry Pi computer to a plastic 'dish' with a full-sized breadboard!
Adafruit Pi Dish for Raspberry Pi: http://adafruit.com/products/942
Check out all our Raspberry Pi products: http://adafruit.com/category/105
Adafruit tutorials for Raspberry Pi: http://learn.adafruit.com/category/raspberry-pi
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
32
6:37
Build a Babel Fish Language Toy with Adafruit RFID and Wave Shields for Arduino
by Adafruit Industries 14,275 views
Complete guide: http://learn.adafruit.com/babel-fish/
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
33
5:11
LED Bike Handlebars
by Adafruit Industries 53,716 views
http://learn.adafruit.com/led-bicycle-handlebars/
http://adafruit.com/products/932
This project was inspired by Mitchell Silva, who created GLO-BARS with LEDs inside the handlebars: http://coroflot.com/MitchellSilva
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
34
1:39
iPhone Replacement Backs & adding NFC to iPhone
by Adafruit Industries 29,045 views
Learn to replace the backing on your iPhone 4 or 4S! We also experimented with putting an NFC tag inside the back of the iPhone. http://adafruit.com/category/111
http://learn.adafruit.com/rfid-iphone
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
35
5:32
GPS Dog Collar
by Adafruit Industries 13,783 views
Wonder if you're giving your dog the exercise she needs? Like electronics? Make your own GPS dog collar! Becky Stern and Tyler Cooper show you how: http://learn.adafruit.com/gps-dog-collar/
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
36
1:26
Super Vision with a USB Microscope!
by Adafruit Industries 14,712 views
USB Microscope: http://www.adafruit.com/products/636
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
38
1:21
iNecklace by Adafruit - Getting Started
by Adafruit Industries 13,450 views
iNecklace: http://www.adafruit.com/inecklace
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
39
0:42
Messograf Pen Calipers
by Adafruit Industries 4,949 views
http://www.adafruit.com/products/810
Caliper rule? Tire tread gauge? Ruler? Thread scale? Writing instrument? The Messograf is all of these in one. -
40
1:08
iCufflinks by Adafruit - Getting Started
by Adafruit Industries 40,013 views
Sophisticated. Modern. Open Source. Gorgeously machined aluminum with a subtle pulsating LED. http://www.adafruit.com/icufflinks
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
-----------------------------------------
Proudly made in North America (Canada and USA). With these, you are, most definitely, from the future. For those special occasions when you need to be dressed to iMpress:
Weddings, Tech events, Sci-Fi/Comic-Cons, IPOs and VC funding opportunities.
CNC machined from the finest 6 series aluminum for durability and beauty. The iCufflinks are a remarkable accessory. Machined with a "screw in backing". Each iCufflink contains a circuit board with pulsating LED and battery.
iCufflinks are completely open source. The source code, circuit board files, schematics and CAD files are posted on GitHub. Mod & Hack away!
Before your fancy event, just pop the battery in, screw the backing and your iCufflinks will gently pulsate for up to 24 hours.
The "pulsing" is similar to the "breathing" LED pattern on many laptop and computer systems. The default pattern is reverse engineered from the Apple "breathing" LED on Macs, MacBooks, iMacs, etc. -
41
2:00
Raspberry Pi Enclosure - Adafruit Pi Box
by Adafruit Industries 76,786 views
Pi Box Enclosure - http://www.adafruit.com/products/859
Keep your Raspberry Pi® computer safe and sound in this lovely clear acrylic enclosure. We designed this case to be beautiful, easy to assemble and perfect for any use (but especially for those who want to tinker!)
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
42
2:23
Ohm Sweet Ohm Cross-Stitch Kit by Adafruit
by Adafruit Industries 5,967 views
A cross-stitch kit that's also a resistor chart! Not only is this kit fun to make (and good for beginner stitchers), when it's all done it functions as a handy resistor reference chart. This kit comes complete with everything you need to get started: http://adafruit.com/products/855
Also check out our complete cross-stitch tutorial: http://ladyada.net/make/xstitch/ -
43
0:54
-
44
2:05
Adafruit MENTA - Mint Tin Arduino Compatible Kit
by Adafruit Industries 13,866 views
Adafruit MENTA - http://www.adafruit.com/products/795
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
45
2:47
Adafruit NFC/RFID Shield for Arduino
by Adafruit Industries 39,504 views
We've taken our popular Adafruit PN532 breakout board and turned it into a shield - the perfect tool for any 13.56MHz RFID or NFC application. http://www.adafruit.com/products/789
The Adafruit NFC shield uses the PN532 chip-set (the most popular NFC chip on the market) and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. If you want to do any sort of embedded NFC work, this is the chip you'll want to use!
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
46
3:45
How-To: Electronic Piggy Bank
by Adafruit Industries 16,876 views
Programmable 1 coin acceptor: https://www.adafruit.com/products/786
Code on github: https://github.com/adafruit/Adafruit-Programmable-Piggy-Bank
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
47
2:21
Emergency Lockpick Card - Getting Started
by Adafruit Industries 76,736 views
Pick up a lockpick card up from Adafruit: http://www.adafruit.com/products/788
Our lockpicking playlist: http://www.youtube.com/playlist?list=PL8354230E0287C858
MIT's lockpicking guide: http://www.lysator.liu.se/mit-guide/MITLockGuide.pdf
Some people say "a college education opens doors" but for thousands of dollars less you can open any door you wish using this ever-handy emergency pick card.
Designed and produced by The Open Organisation Of Lockpickers (http://toool.us/), this ISO-compliant wallet-sized card can be kept easily on your person without hassle or fuss, but should the need arise for picks in a pinch, simply snap the card apart and you have a nine-piece toolkit at your disposal!
Comes with: two feeler hooks, a half-diamond, a wavy rake, a sawtooth rake, and a double-bump rake. The 'frame' of the card snaps apart into three tensioners.
Unlike other "credit card" pick sets pop up from time to time (that tend to either be interesting novelty items or overpriced and under-equipped), this TOOOL card is a genuine and fully functional lockpick set made of commercial-grade steel, not stamped aluminum or plastic.
This emergency pick card is made completely in the United States.
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
48
1:19
Smart Cord Bluetooth Extension Cord
by Adafruit Industries 3,563 views
http://www.adafruit.com/products/763
This is Zsmart's patent pending electrical extension cord with manual and Bluetooth® wireless technology control. The Bluetooth wireless range of 30 feet or more, depending on environment. Does not require line of site. This is an inexpensive way to control on/off power via Bluetooth from a variety of devices. We like using these to turn on and off hard-to-reach projects high up or put inside structures without easy access. Since it uses an almost universal way of accessing it (A2DP Bluetooth) there are a lot of projects possible.
music by bartlebeats: http://soundcloud.com/bartlebeats -
49
2:55
Getting Started with the Fingerprint Sensor
by Adafruit Industries 32,063 views
Here's a video guide to getting started with our fabulous fingerprint sensor! In addition to the detailed photo/software tutorial, we hope it'll help you set up your sensor easily!
Buy one: http://www.adafruit.com/products/751
Full tutorial: http://learn.adafruit.com/adafruit-optical-fingerprint-sensor
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
50
3:22
How-to make an EL wire couch!
by Adafruit Industries 19,980 views
Becky Stern makes an EL wire couch! Welted EL wire is great for applying with a stapler while standard EL wire makes great upholstery piping. http://www.adafruit.com/blog/?p=27554
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
51
0:34
Parallax BOEBot Robot for Arduino Kit
by Adafruit Industries 11,982 views
Parallax BOEBot Robot for Arduino Kit: http://www.adafruit.com/products/749
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: http://soundcloud.com/bartlebeats
----------------------------------------- -
52
1:18
Jenny Holzer printer
by Adafruit Industries 3,443 views
The Internet of Things Printer:
http://www.adafruit.com/iotp
It's really easy to change the output of the Internet of Things Printer-- the Twitter query is just one line of code you modify in the Arduino sketch. In this video I show you how to reprogram the IoTP to print Jenny Holzer aphorisms directly on my desk. -
53
0:51
Slip Ring with Flange
by Adafruit Industries 13,752 views
http://adafru.it/736
22mm diameter, 6 wires, max 240V @ 2A
With a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more! We've seen a lot of people DIY slip ring's out of desperation but no longer, simply pick up one of these to solve any rotation needs you have.
Inside the plastic tube is a gold plated slip ring for 6 wires. There are six color coded wire sets made of 26 AWG and no matter how you twist the assembly, they will remain in continuity. Each of the wire sets can carry up to 2A at up to 240VAC or 240VDC. There's a 44mm (1.7") diameter flange with mounting holes to make it easy to attach or you can cut it off with a hacksaw and drill/machine as you wish it seems to just be ABS plastic. Rated to rotate up to 300 RPM (but you can probably go faster if you don't mind a reduced life and/or noise) -
54
0:29
Glow-in-the-dark "Radiation" Skill badge
by Adafruit Industries 2,298 views
http://www.adafruit.com/products/621
You learned about radiation and radioactivity! Adafruit offers a fun and exciting "badges" of achievement for electronics, science and engineering. We believe everyone should be able to be rewarded for learning a useful skill, a badge is just one of the many ways to show and share.
This is the "Radioactivity and Radiation" badge for use with educators, classrooms, workshops, Maker Faires, TechShops, Hackerspaces, Makerspaces and around the world to reward beginners on their skill building journey!
This special badge is white in the day time and glows green in the dark. -
55
0:25
Square Digital RGB LED Pixels
by Adafruit Industries 2,311 views
https://www.adafruit.com/products/683
RGB Pixels are digitally-controllable lights you can set to any color, or animate. Each metal 'pixel square' contains 4 RGB LEDs and a controller chip soldered to a PCB. The pixel is then 'flooded' with epoxy to make it waterproof. These are fairly large pixels but they have a lot of nice mounting options, such as two metal flanges on the side and a 0.15"/4mm diameter hole in the middle so you can screw them directly onto a surface. They're typically used to make outdoor signs. Compared to our other LED dots, these are much bigger and much brighter, good for larger scale installations. -
56
0:35
Diffused 5mm Slow Fade Flashing RGB LED
by Adafruit Industries 4,013 views
https://www.adafruit.com/products/679
These are very interesting 5mm diffused RGB LEDs - instead of having 4 pins to control 3 LEDs, they have only two leads - power and ground. When powered, the LEDs perform a slow fade through the rainbow, from red to orange to yellow, etc till they get back to red. See the video below for the timing and look. There is no way to change the 'program' or rate, its burned into a little chip that is inside the LED itself. If you need to have an RGB perform a particular arrangement, check out our RGB LEDs that you can easily control with a microcontroller:
http://www.adafruit.com/products/159
We also have a version that's an exciting RGB flashing pattern:
https://www.adafruit.com/products/680 -
57
0:18
Diffused 5mm Fast Flashing RGB LED
by Adafruit Industries 1,444 views
https://www.adafruit.com/products/680
These are very interesting 5mm diffused RGB LEDs - instead of having 4 pins to control 3 LEDs, they have only two leads - power and ground. When powered, the LEDs perform a flashing effect with all the colors. See the video below for the timing and look. There is no way to change the 'program' or rate, its burned into a little chip that is inside the LED itself. If you need to have an RGB perform a particular arrangement, check out our RGB LEDs that you can easily control with a microcontroller:
http://www.adafruit.com/products/159
We also have a version that's a 'slow fading' RGB color cycle:
https://www.adafruit.com/products/679 -
58
0:38
RF Touch Wheel Controller for Analog RGB LED Strips
by Adafruit Industries 4,001 views
https://www.adafruit.com/products/678
This touch controller set is a quick and easy way to control a bunch of our 12V analog RGB LED strip. The box part contains power driver circuitry and an RF receiver. The handheld remote contains a capacitive touch interface and an RF transmitter. By wiring the analog strip to the box you can easily adjust the color from across the room. Since it is RF you don't need line-of-sight like you would with an IR Remote. -
59
1:29
Adafruit Internet of Things Printer
by Adafruit Industries 4,821 views
http://www.adafruit.com/products/717
Build an "Internet of Things" connected mini printer that will do your bidding! This is a fun weekend project that comes with a beautiful laser cut case. Once assembled, the little printer connects to Ethernet to get Internet data for printing onto 2 1/4" wide receipt paper. The example sketch we've written will connect to Twitter's search API and retrieve and print tweets according to your requests: you can have it print out tweets from a person, a hashtag, mentioning a word, etc! Once you've gotten that working, you can of course easily adapt our sketch to customize the printer. -
60
2:15
Circuit Playground by Adafruit
by Adafruit Industries 2,698 views
http://itunes.apple.com/us/app/circuit-playground/id49248767
1
Circuit Playground simplifies electronics reference & calculation so you can have more fun hacking, making, & building your projects!
• Decipher resistor & capacitor codes with ease
• Calculate power, resistance, current, and voltage with the Ohm's Law & Power Calc modules
• Quickly convert between decimal, hexadecimal, binary or even ASCII characters
• Calculate values for multiple resistors or capacitors in series & parallel configurations
• Store, search, and view PDF datasheets
• Access exclusive deals from Adafruit Industries
All that, plus additional features & enhancements coming soon! -
61
0:32
happy valentine's day!
by Adafruit Industries 1,133 views
this is the inecklace we make here at adafruit, it's an open-source hardware necklace that glows and is hackable.
http://www.adafruit.com/products/440 -
62
0:28
FLORA by Adafruit
by Adafruit Industries 14,737 views
an open source wearable electronics platform: https://www.adafruit.com/products/659
-
64
1:09
ADAFRUIT X2 TIME BALL
by Adafruit Industries 16,952 views
Why spend time in a crowded and cold times square when you can make your OWN Times Square LED ball? Perfect for new years eve, disco parties, weddings, raves, bar mitzvahs, or just a romantic night in. This DIY LED Disco Ball is made using Adafruit's 12mm LED pixels, an Arduino and two 2.4GHz XBee's (for wireless disco control!). The LED pattern is controlled by the open source graphics language, Processing so it works on Windows, Mac or Linux computers. The ball pattern is made of a dozen laser cut acrylic panels that are ziptied together and the hanging cord is also the power supply cable.
We'll have a full tutorial after the new year so stay tuned and get your leisure suit to the cleaners!
Contains:
https://www.adafruit.com/products/322
https://www.adafruit.com/products/50
https://www.adafruit.com/products/128
https://www.adafruit.com/products/126
https://www.adafruit.com/products/247
Github:
https://github.com/adafruit/Adafruit-X2-Time-Ball -
66
0:40
ASCII Heart Necklace
by Becky Stern 10,023 views
Geeky pendant in Sterling silver, made with love and lasers in NYC:
http://sternlab.org/store/#asciiheart
http://www.etsy.com/listing/53537885/
http://www.adafruit.com/products/577
http://www.makershed.com/ASCII_Heart_3_Necklace_p/cstl2.htm
Music by Collin Cunningham: http://narbotic.com/ -
68
1:00
ADAlights demo!
by Adafruit Industries 11,088 views
ADAlights demo!
http://ladyada.net/make/adalight/ -
70
0:30
iCufflinks - open source electronic cufflinks
by Adafruit Industries 11,380 views
iCufflinks - open source electronic cufflinks
http://adafruit.com/icufflinks
http://www.adafruit.com/products/379 -
71
0:28
iCufflinks - open source electronic cufflinks
by Adafruit Industries 5,976 views
iCufflinks - open source electronic cufflinks
http://adafruit.com/icufflinks
http://www.adafruit.com/products/379 -
72
1:02
-
73
2:25
Kinect Hacking
by Adafruit Industries 38,814 views
Ladyada uses the Beagle USB analyzer to sniff the USB data between the Kinect and XBox 360.
-----------------------------------------
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
----------------------------------------- -
74
2:06
Portable solar charger tracking
by Adafruit Industries 2,601 views
Portable solar charger tracking with arduino - http://www.adafruit.com
-
75
0:20
Enclosure for Arduino
by Adafruit Industries 2,090 views
https://www.adafruit.com/products/271
Enclosure for Arduino - quick video from the 3D PDF! http://www.adafruit.com/datasheets/arduino_enclosure.pdf -
76
0:27
TV-B-Gone Kit
by Adafruit Industries 8,638 views
http://www.adafruit.com/products/73
Tired of all those LCD TVs everywhere?
Want a break from advertisements while you're trying to eat?
Want to zap screens from across the street?
The TV-B-Gone kit is what you need! This ultra-high-power, open source kit version of the popular TV-B-Gone is fun to make and even more fun to use. This version is best used in countries with NTSC: North America & Asia.
This kit comes unassembled with all parts necessary. Tools and batteries are not included. This is a very simple kit and great for people who have never soldered anything before. -
77
2:13
Conway's Game of Life Kit
by Adafruit Industries 3,152 views
http://www.adafruit.com/products/89
In 1970, John Conway came up with a 1-player game called Game of Life. The Game of Life is a mathematical game that simulates 'colonies' that grow or die based on how crowded or lonely they are and is known for the way it creates a beautiful organic display out of randomness.
Here is a design for a simple electronic project that plays Conway's Game of Life. Make one kit and keep it on your desk, or attach multiple kit modules together to create a large display.
Originally created by Dropout Design, this revision adds a few extra features. The kit is very easy to make and an excellent first electronics/soldering project. It is perfect for workshops since at the end everyone can connect their completed module together.
The animated GIF above shows 4 modules connected together. Each kit comes unassembled and includes all parts necessary for one module. -
78
0:40
Drawdio kit makes music while you draw
by Adafruit Industries 5,439 views
http://www.adafruit.com/products/124
Drawdio is an electronic pencil that lets you make music while you draw! It's great project for beginners: An easy soldering kit with instant gratification. Essentially, its a very simple musical synthesizer that uses the conductive properties of pencil graphite to create different sounds. The result is a fun toy that lets you draw musical instruments on any piece of paper. -
79
1:06
Adafruit Wave Shield for Arduino Kit
by Adafruit Industries 10,149 views
https://www.adafruit.com/products/94
Adding quality audio to an electronic project is surprisingly difficult. Here is a shield for Arduinos that solves this problem. It can play up to 22KHz, 12bit uncompressed audio files of any length. It's low cost, available as an easy-to-make kit. It has an onboard DAC, filter and op-amp for high quality output. Audio files are read off of an SD/MMC card, which are available at nearly any store. Volume can be controlled with the onboard thumbwheel potentiometer.
This shield is a kit, and comes with all parts you need to build it. Arduino, SD card, tools, speaker and headphones are not included. It is fairly easy to construct and anyone with a successful soldering project under their belt should be able to build it.
The shield comes with an Arduino library for easy use; simply drag uncompressed wave files onto the SD card and plug it in. Then use the library to play audio when buttons are pressed, or when a sensor goes off, or when serial data is received, etc. Audio is played asynchronously as an interrupt, so the Arduino can perform tasks while the audio is playing. -
80
1:40
Adafruit Wave Shield for Arduino Kit
by Adafruit Industries 1,894 views
Pick up a Wave Shield: http://www.adafruit.com/products/94
Adding quality audio to an electronic project is surprisingly difficult. Here is a shield for Arduinos that solves this problem. It can play up to 22KHz, 12bit uncompressed audio files of any length. It's low cost, available as an easy-to-make kit. It has an onboard DAC, filter and op-amp for high quality output. Audio files are read off of an SD/MMC card, which are available at nearly any store. Volume can be controlled with the onboard thumbwheel potentiometer.
This shield is a kit, and comes with all parts you need to build it.
Arduino, SD card, tools, speaker and headphones are not included. It is fairly easy to construct and anyone with a successful soldering project under their belt should be able to build it.
The shield comes with an Arduino library for easy use; simply drag uncompressed wave files onto the SD card and plug it in. Then use the library to play audio when buttons are pressed, or when a sensor goes off, or when serial data is received, etc. Audio is played asynchronously as an interrupt, so the Arduino can perform tasks while the audio is playing. Can play any uncompressed 22KHz, 16bit, mono Wave (.wav) files of any size. While it isnt CD quality, it is certainly good enough to play music, have spoken word, or audio effects. Check out the demo video/audio at the webpage Output is mono, into L and R channels, standard 3.5mm headphone jack and a connection for a speaker that is switched on when the headphones are unplugged Files are read off of a FAT16/FAT32-formatted SD/MMC card Included library and examples makes playing audio easy Please note that the library is rather bulky, requiring 10K of flash and more than 1/2 K of RAM for buffering audio. It works fine using an yATmega328-based Arduino (Duemilanove, Uno or compatible). This shield is not Mega or Leonardo compatible!
More information, including design notes, schematics, library, examples, etc is at the Wave Shield webpage http://www.adafruit.com/products/94
