by RadioMagOnline 427 views
The Talent Pod is an announcer's mic and headphone controller for use by talent at a remote broadcast. It is ideal for use at sporting events and on-location broadcasts. Talent Pod solves the problem of providing talent with a mix of local and return audio for their headphones. Its simplicity allows for error-free use by non-technical users. Several units can be quickly linked for use at broadcasts with multiple announcers.
by RadioMagOnline 1,037 views
The David IV is the fourth generation in the Invonics David (vs. Goliath) series of FM and digital air-chain processing systems. Processing includes five bands of dynamics compression and equalization, intelligent gain-riding AGC (Automatic Gain Control), sub-bass and stereo field enhancements, and the Inovonics proprietary PIPP (Polarity Independent Peak Processing) limiter.
by RadioMagOnline 228 views
Remotely controllable through Davicom's MAC line of intelligent site monitoring systems, the FMBM can be manually configured and operated to monitor and log transmitter power, signal strength, FM deviation, carrier frequency and RDS/RBDS decoding. Multiple status and alarms are provided.
by RadioMagOnline 224 views
Precision Delay offers sample-accurate delay times adjustable from a fraction of a second to five hours, seamless PPM-protecting builds and exits, synchronized data streams and network accessible control. Precision Delay connects to a Belar FMHD1 or Audemat Golden Eagle to retrieve offset measurements directly from those monitors and automatically adjust the delay.
by RadioMagOnline 158 views
These RF adapters provide an easy transition from male or female 7-16 DIN to 3-1/8", 4-1/16" or 6-1/8" connector. The sturdy aluminum construction includes handles around the DIN connector, which aid insertion and removal and also protect the connector when not in use. The inner conductor is silver plated for better conductivity and feature PTFE insulators.
by RadioMagOnline 716 views
This studio-to-transmitter link set operates in the 950MHz band. Both units feature analog, AES3 and composite inputs (transmitter) and outputs (receiver). The transmitter produces 10W out and includes a BW Broadcast DSP-X four-band audio processor built-in. The receiver includes an RDS encoder, Ethernet remote control for SMTP, SNMP and HTML connections, and will send email alerts when an alarm occurs. The receiver also includes additional analog and ASE3 input and backup audio capability.
by RadioMagOnline 498 views
Low-profile design and a table-top form factor allow the LX-24 to fit into almost any studio situation, requiring no holes or cut-outs in the furniture. The meter bridge features three sets of bright, ultra-high resolution LED meters with overload indicaor, as well as LED talkbacks for auxiliary levels and pan control. Each fader provides access to four stereo buses, plus four pre-fader aux sends, a stereo cue bus, and four mix-minuses. An LED source name display, an A/B source selector, and two programmable soft buttons are also available on each module.
by RadioMagOnline 406 views
Setting talent in front of a mic before going live is easy. Once the show begins, they tend to move around, and they move away from their mics. RoboBoom was designed to realign with the talent. A sensor identifies the speaker's face and tracks the movement. Servo motors keep the mic aimed at the speaker to maintain better mic placement as the speaker moves. The boom can also be remotely controlled, which is useful for video shoots to reorient the microphone.
by RadioMagOnline 339 views
This family of audio interfaces converts traditional analog and digital audio signals into the Livewire IP-audio streams used by Axia AoIP networks. xNodes can configure themselves, fit in half-width 1RU with optional wall-mount kits, feature fanless power supplies and consume 14W of power. They can also draw power over Ethernet from a network switch or the power injector included. They also feature dual Livewire ports and a redundant power plan, work with both stereo and mono signals, have RJ-45 ports for each I/O and locking DB-25 connectors.
by RadioMagOnline 284 views
IP Link 100 is the first in a new range of low-cost, high-performance audio codecs. It is a compact solution for reliable program audio transport between two or more points and brings "always on" Intraplex technology to an affordable price level. Features include dynamic stream splicing, multicoding and automatic backup.
by RadioMagOnline 360 views
This service helps Nautel NX, NV, NVLT and VS-series transmitter users track, diagnose and repair problems, sometimes even before a failure. The Advanced User Interface (AUI) uses a firewall-friendly Remote Monitoring Database to send data from the transmitter to Nautel to track parameters. Parameter data can be tracked and displayed over time. A live mode shows the last 30 minutes of data. The software can directly access the transmitter AUI to obtain readings as well.
by RadioMagOnline 164 views
The HR-MCP2 is a dual-channel microphone compressor that produces a consistent audio output level over wide variations (up to 25dB) in the microphone input level. Rear-panel switches allow setting each output to mic or line level. A front-panel switch is provided to enable 48Vdc phantom to both microphone inputs. Gain reduction is nearly instantaneous for both expected and severe input overloads. Automatic release time adjustments result in nearly inaudible compression action over the entire dynamic gain reduction range.
by RadioMagOnline 230 views
This new model of steel doors boasts an STC58 (sound transmission class), which exceeds the STC53 commonly found in similar doors from other manufacturers. The doors are 1.75" thick, so standard latching hardware can be used. The door sits on three cam hinges and uses invisible gaskets to hide the seals when closed. Gaskets can be replaced in the field if needed. The one-piece frame can be sized to a standard door opening or any custom size. Glass can be added to a door, and STC data for doors with glass is being gathered.
by RadioMagOnline 429 views
This portable radio receiver is an RDS/RBDS diagnostic tool. The unit displays frequency, signal strength, stereo and RDS status, PI (Program Identification), PTY (Program Type), PR (Programs Service Name) and RT (Radio Text). Stations can be selected by direct channel tuning or seek function. The Active Groups Screen and Group Inspector Screen show greater detail about the RDS stream down to individual bits and can warn when RDS data is invalid.
by RadioMagOnline 99 views
This high-level diplexer efficiently combines analog and digital. The system's analog insertion loss is -0.35dB or less and the digital loss is -1.4dB or less. Group delay of the analog signal is less than 350 nanoseconds, and the digital delay is less than 600 nanoseconds. The 788 is rated for up to 30kW analog and up to 5kW digital input power. The digiplexer gives FM radio stations currently operating a -20dBc IBOC power level with a 10dB hybrid injector the opportunity to increase digital power without having to invest in a new transmitter.
by RadioMagOnline 424 views
A rackmount 6-channel IP mixer, RAQ is designed to meet the demands of newscasts or news assembly. Paired with the fanless Axia QOR.16 console engine, RAQ works for standalone operation, but can also connect to Axia Livewire networks to share audio with other studios. Setup is easy: RAQ connects to the QOR.16 with a single cable. QOR.16 is an "integrated console engine" which contains analog, AES/EBU and Livewire I/O, GPIO logic ports, console power supply and CPU, and a zero-configuration network switch with Gigabit. A single QOR.16 engine can be used with two Axia RAQ consoles.
by RadioMagOnline 219 views
The TM3 includes features of the larger TM7 and TM9 versions and is controlled using a touch-sensitive display. With a 4.3" touchscreen, an exterior that allows for horizontal and vertical placement, PPM and true-peak instruments, the TM3 offers comprehensive loudness metering in compliance with all globally relevant standards, including EBU R128, ITU BS.1770-2/1771, ATSC A/85, and ARIB. Instruments include single-channel and summing bar graphs, an LRA instrument and numerical displays.