 Hey guys, Drew with GeoArm here again to talk to you about the M2M-MN02-LTE and its connection into a GE InterLogix Networks Panel. Super easy for connections here. This is only going to be wired for communications at this point. So what I've already done is I've already got the antenna screwed in place here as you can see. This comes disassembled. So I've already put it on, no big deal to get it on there, you just screw it just like that. You just put it on and then you can put the antenna which is located here anywhere you'd like. I'm just going to stick it outside the box here. You don't want to put it inside the box so be careful with that. But outside the box anywhere is fine. What you're looking at right now on the Networks Panel is a view from the side. So this would be the top of the panel up here and it would be going from top to bottom. So the bottom of the panel would be down here and there's a door that opens from the top here down to the bottom. So what we're going to do is I'm just going to show you from the side view so don't be thrown off if it doesn't look like this when you're wiring it in, it'll be probably facing another direction. Alright, first thing we're going to do here is we're going to take a look at the documentation. The documentation will show you how to wire it in. It'll give you all kinds of different tips and tricks and things like that. Definitely keep this. This is a very valuable piece of documentation. It'll have your username and password if you are going to ever use the R-Control app, you'll need that. Alright, so what we're going to do is get straight into getting this wired for communications and power. So power first, we're going to take this red wire. This red wire is going to be getting wired into what's titled AUX Plus. So AUX Plus. Get that red wire screwed down in there. There may be other wires in there if there are. Just leave them in there and wire this in there along with it because it could be going to something that's needing power. Now the black wire is going to go into the COM, which is literally right next to it. I believe if you're looking at this panel the correct way it would be right above it. So it'll be COM. Then we're going to be wiring in for communications now that we have power wired in here. This is the power. So we have positive into AUX Plus and the ground or negative into COM. Now we're going to take the communications wires, which are going to be the green and yellow wire. You will have an orange and white wire kind of hanging there. I'd recommend throwing some electrical tape or just cutting them back and getting out of the way if you're not going to be using the R control app. Just get them out of the way, throw some tape on them, cut them back, whatever you want to do. What we're going to do now is we're going to go ahead and get this wire for communications. So you want to take the green wire, which is this one here, and you want to take that and go to what's labeled R, which is right down here on the end. Go to R, get that wired in, screwed down. Then we're going to take the yellow wire and the yellow is going to be going into T. So you just get that put in place, screwed down. Now, if there are any wires that are in the T, R, T1, or R1 slot, just make sure to go ahead and get those wires out of there. You don't want those in there along with this. All you're going to need are these wires in for communication. And of course, these power wires, like I said, may be sharing this spot with others. So that's okay down here. But in this specific spot, these should be the only wires and T1 and R1 should no longer have wires in it as well. At that point, you are wired in for communications and you're ready to go on the GE Interlogix Networks panel. At this point, you're ready to give us a call. So make sure you document your serial number, which is located right here, six-digit number. And give us a call at that moment. We can get you activated or scheduled for an appointment to get activated. Thank you guys for watching this video. This has been how to wire the M2M-MNO2-LTE into the GE Interlogix Networks panel. Take care. Make sure to subscribe to our YouTube page and click the Show More tab underneath the video where you can view valuable links pertaining to this product, similar how-to videos, and our low-cost, no-contract-the-large monitoring services.