TUBE DRILLING with mag drill | Pipe drilling with magnetic drilling machine | MAB 455





The interactive transcript could not be loaded.


Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Oct 5, 2015

With BDS magnetic drilling machines, BDS annular cutters and BDS tube clamp device, drilling holes on tubes and pipes is made easy and safe. The BDS clamping devices are suitable for tubes with a diameter from 80 to 250 mm and 150 to 500 mm. Flexible and quick clamping is possible in any drilling situation. The clamping device with swivelling V-blocks is fixed on the tube by means of tension chains. The drilling position on the tube can be adjusted easily and safely. The range of application of the magnetic core drilling machines of the ProfiPLUS series is significantly increased by these devices.

The MAB 455 Magnetic Drill Press from BDS Maschinen GmbH (https://www.bds-maschinen.de).

High power with keyless quick-change chuck system
Powerful & Reliable
10.5 Amp double-insulated motor
17-1/4" high, 29 lbs.
High-speed, 2-speed oilbath gearbox, ideal for annular cutters and twist drills
Designed for continuous use
Intelligent electronic torque control
Drill up to 2" dia.
Uses annular cutters
Twist drilling up to 7/8" diameter (with optional chuck IBC 22)
Integrated cutting oil reservoir
Automatic internal lubrication
Swivel base (model MAB 455 SB)
Keyless Cutter Mount
Quick-change keyless cutter system for 3/4" Weldon shank
Integrated Safety
Green/Red LED magnetic force indicator for safe operation
Internal cable routing
Simple, ergonomic arrangement of controls for one-handed operation
Emergency-off function


When autoplay is enabled, a suggested video will automatically play next.

Up next

to add this to Watch Later

Add to

Loading playlists...