 Γεια σας και καλωστάτε back to another mixed media Tuesday. Τώρα θα δημιουργήσω ένα σχέδιο και η σημαντική έννοιξη από αυτό το δι-αΣΕ. Αυτό είναι ένα σημαντικό σχέδιο, δημιουργεί από την Τυμ Holtz. Θα δημιουργήσω κάτι για το κόφι, αλλά μπορείτε να ευκολουθεί την ιδια και να το κάνετε όλα για το τ. Τώρα για τα σχέδια μου θα δημιουργήσω σε αυτό το σχέδιο. Υπάρχουν πάνερες ευκολουθείς σε διαφορετικά σχέδια και με διαφορετικά σχέδια στο σχέδιο. Αυτό θα δημιουργήσω από το Amazon, πιστεύω, και θα σας δημιουργήσω ένα άλλο που είναι also 8x8, που είναι από Artisa, και αυτό μπορείτε να δείτε ότι το σχέδιο είναι σχέδιο. Θα δημιουργήσω για τα δυνατότητα, λίγες εγώ αν θέλεις να γράψεις κάτι και θα δημιουργήσω σε ένα σχέδιο σχέδιο σήμερα, γιατί δεν θέλω να δημιουργήσω πολλά δημιουργήσεις και δεν χρειαζόταν πολλά δημιουργήσεις στο βεβαιό. Now, for today I'm going to play with resin. And the idea is to create a lovely frame for the wooden panel and for that I decided to work with this silicone mat. This is called Regal Trimmings and it gives you lovely designs all over that you can repeat again and again to create lovely frames for your mixed media projects. Αυτό είναι ένα μόλτι από ένα προσφασμό που έλεγα, νομίζω ότι είναι από το τελευταίο χρόνο, αλλά είναι ένα από τα μόλτι που είναι πολύ βερσί, γιατί μπορείς να χρησιμοποιήσεις τους μεγάλες και μεγάλες σε διάφορες τύπες προσφασμούς. Η ιδια είναι να βγείτε το ίδιο μόνο 4 φορές, για να μπορώ να το βάζω όλα στον κομμάτι. Για αυτό θα χρησιμοποιήσω ρεζίν και θα πάω με αλουμιλίδι ρεζίν, που κουρήσει σε μόνο 10 μήνες. Αυτή είναι ένα 2 φορές ρεζίν και θα δούμε το όλο του προσφασμού σήμερα. Υπάρχουν άλλες μέρες να δείξουν στο μόνο, για παράδειγμα μπορείς να χρησιμοποιήσεις ένα νερό, μπορείς να χρησιμοποιήσεις το κλουγάνι και μάλλον σιλικό, στον μόνο. Ώρα μπορείς να δείξεις ένα σχέδιο ρεζίν, που είναι ένα 2 φορές ρεζίν, αλλά είναι έναν καλό μέρος να κουρήσεις. Λοιπόν, για αυτόντι θα πάω με αυτήνή ρεζίνι. Και όλοι χρειαστεί είναι 2 φορές, αυτά που βρίσκονται στον μόνο, μετά τα 2 μόνος. Αυτές είναι ρεζινές, μπορείς να χρησιμοποιήσεις τα μάλλον και μετά να χρησιμοποιήσεις το ρεζίν. Και επειδή θα χρειαστεί μερικές σχέδια, για να μπορείς να χρησιμοποιήσεις το προσφασμό. Αυτές είναι συγκλουσμένοι σε το κλουγάνι. Τώρα, πριν να ξεκινήσουμε, θα δούμε λίγο για τη δημιουσία, γιατί αυτό είναι πολύ σημαντικό εδώ. Ξεκινήσουμε μερικές σχέδια. Ξεκινήσω να χρησιμοποιήσω τα μάλλον και δεν έχω κάποιες αλλαγές, αλλά αυτό δεν χρειαστεί. Φυσικά, δημιουργήσεις ότι είσαι σύμφωνα και δεν μπορείς να χρησιμοποιήσεις ρεζινές με το ρεζινό σου. Επίσης, η χρειαστεί είναι καλύτερη σήμερα. Αυτό είναι why I chose to do this today, για να μπορώ να έχω όλες τα μάλλον ανοί ή το κράφτρου μου. Φυσικά, δημιουργήσεις ότι είσαι σύμφωνα σε ένα καλύτερο βεντυλαίδι. Τώρα είμαι για αυτή τη δημιουργή εδώ, που βρίσκω ότι είναι πιο σύμφωνα και θα καταφέρει πραγματικά το σχέδιο μου. Και έχω λίγο άλλα μάλλον εδώ, γιατί είμαι πίσω ότι δεν θα μπορώ να χρησιμοποιήσω το ρεζινό σου. Θα έχω κάποιο αξιότητα σε αυτό το ρεζινό σου. Δεν θέλω να το χρησιμοποιήσω, δημιουργήσω λίγο αλλαγές μάλλον και έχω μία ιδέα να φτιάξω κάτι με τα σχέδια. Γιατί μπορώ να κάνω κάποια από τα μάλλον για να έχω σε καρδιά και κάποια γερνόση που μπορώ να χρησιμοποιήσω και να χρησιμοποιήσω. Θα δείξω τώρα πώς θα δείξω πώς βίνω. Μπορείς να χρησιμοποιήσεις ένα σχέδιο αν θέλεις να είναι σύμφωνο. Δεν θα μην πω να αγγιωθήσω το ρεζινό σου. Το πραγματικό ρεζινό σου είναι πιο σύμφωνο. Θα μην πω να αγγιωθήσω και να κάνω πίσω ότι έχω μία τα μάλλον. Το ρεζινό σου δεν σημαίνει μόνος για να μην πω να σημαίνεις αγγιωθή, αλλά να μην πω να έχεις το ρεζινό σου. Μπορώ να είμαι πολύ αγγιωθή με τα μάλλον σε τα μικρά τα μικρά κουκάς. Θα πω ένα μέσα στο άλλο. Θα πω να γινήσω το ρεζινό μου και θα ξεχωριώ να μιξω τα δύο πρόταξης. Όταν ξεκινάς το ρεζινό σου θα δεις ότι είναι σύμφωνο και once είναι ετοιμή είναι going to become clear again. Λοιπόν μπορείς να δεις ότι είναι έτοιμοι τώρα, άτσι είναι σημαίνει να μιξω. Τώρα, αν θα μιξω χωρίς από αυτή η μάλλον, θα έχεις δύο πρόταξης και όλα μέσα. Ένα από τα μου σύμφωνα για να μιξω είναι να χρησιμοποιήσω το ρεζινό σου και να μιξω από αυτό. Αυτό θα κάνω σωστά ότι το ρεζινό μιξει μόνος για να μιξω πιστείς να μην έχεις δύο πρόταξης εδώ και εκεί. Απίσης να χρησιμοποιήσω αυτό το ρεζινό σου θα κάνει μια διαφορά για να μην χρησιμοποιήσεις δύο πρόταξης και όταν μην κάνεις δύο πρόταξης. Τώρα για δημιουσιακότητα βρίσκομαι είχα μιξω πιο ρεζινό που πρέπει να χρησιμοποιήσω για να μην χρησιμοποιήσω σε έναν άλλο πρόταξο εδώ και είμαι πίσω ότι θα δουλεύω με αυτό σε έναν άλλο πρόταξο. Και επίσης θα μην χρησιμοποιήσω κάποιες μικρές πρόταξης, like the star for example. Είμαι πίσω να χρησιμοποιήσω ένα λίγο εκεί και με ένα σκοφέρας θα βρήκαμε να βρήξω το πρόταξο για να πω όλη την σκοφέρα. Τώρα είπαμε ένα πολύ σκοφέρας εδώ, δεν έχω κάτι που μην χρησιμοποιήσω. Αλλά όταν έχεις κάτι που βρήκει εκεί μπορείς να πω και να σκρατήσεις τη σύρφαση με το σκοφέρας σου. Και μπορείς να δείτε εδώ πώς η ρεζινό σου ξεκινάται, θα γίνει σκοφέρα και αν θα το πω πάνω πάνω θα βρήξεις ότι είναι αυτη. Θα βρήξω για 10 μήνες και θα είναι σκοφέρα σκοφέρας. Θα βρήξεις ότι τα ρεζινόνια που έχουν πιο ρεζινόνια θα σκοφέρουν σκοφέρας, όμως τα ρεζινόνια που είναι σκοφέρας θα χρειάζονται περισσότερες χρόνια. Θα κάνω ένα βίντεο να σας δείξει όλες τα άλλα μεθόνια για να δημιουργήσουμε αυτά τα ρεζινόνια, σχεδόνια ή σιλικόνια ή το σκοφέρας ή ένα σκοφέρα. Και θα αφήνουμε το προς και κόντια της ευκοπής. Τώρα θα προσπαθώ να αυτοκρατήσω τα ρεζινόνια πρώτα και όχι είναι δυνατές, δεν δεν τελείται πολύ δύσκολο, οπότε είναι πλαιομένοι και αυτό δημιουργεί ότι μπορείς να σας δώσει ένα σκοφέρα αν θέλεις να σας δείξεις. Απότε θέλω να τους αφήνουν να είναι πιο ρεζινόνια, So I'm going to leave them aside to harden. I'm going to also unmold the second star and the fact that the mold is silicone gives you the possibility to unmold those super quickly and easily. And now let's unmold the borders. These are not super hardened yet and you can let them harden for a couple of minutes, but I want them to be pliable because I want to demonstrate something for you. So I'm going to pull out one of the borders. I'm doing that very carefully, making sure that I bend the mold instead of the actual border. And now you can turn it around the bottle if you wish, so you can see how pliable it is. But once it stops curing, it's going to become stiffer and stiffer until it is completely hardened. I'm going to pull out the second border, which is the one that I'm going to work with. If you have some over-pouring on the edges and they are not super clean, you can always use your scissors to clean them up. Now is the time because it is super easy to do that since it is so pliable. You can also use your craft knife like I'm going to do to create metered corners. While this is still pliable, it is easy to cut them out just like butter. I'm going to do the same thing for the other side and I will repeat the same process three more times so that I can have four in total of those borders, which I'm going to stick down. So while one border is curing, I am sticking down the other ones that I already have. I'm using ultra-thick gel medium for that. You can use any type of glue that you want. I'm going to apply a generous amount with my spatula and place it down. Of course, I will repeat the same steps for all four sides until I have my frame ready to go. It is a fun process that I did on one day of the week so I had my frame ready for my project the next day and now I'm using thick black gesso and I will go all around the frame with that and I will make sure that I cover up the inside edges as well as the resin. Now let's start creating the actual project for this frame. I did measure the inside and it is slightly smaller than the 8x8 and I'm going to use this pattern paper. This is from the Etchetera collection. It is an older collection by Team Holtz and I decided to go with this pattern paper from there, which I'm going to cut down to size, making sure that it's going to fit inside that frame. I'm using my Deckled Edge paper trimmer so that I have a lovely and interesting edge there, but if you don't have such a trimmer you can always use your regular trimmer and go all around the edges with your scissors. I did spray a little bit of speckled egg with my Distress Oxide spray or my glass mat and then I did press that paper on top of that. I don't want to have too much water on the paper. Remember, this is just a pattern paper. It's not watercolor paper so it won't work with water too well. However, I do want to have that bluish element back there along with a few splashes here and there. Now this is going to be a page about coffee and I knew I had this coffee stain stencil in my stash. This is again a very old stencil and I'm going over it with Distress Ink and that's Vintage Photo, one of my favorite colors of distressing of all times. I'm going to use the stencil three times in different areas making sure that I rotate it and I will create kind of a triangle here. There are also some splashes which I'm going to use. I'm not using the whole stencil as it is, I'm just choosing different areas that I can work with on different parts of the page. So it doesn't look identical. I'm also going to ink up the edges. Again, that's Vintage Photo. Since I went with a pattern paper for the background it does have some interesting elements back there. However, I cannot stay away from stamping so in this case I'm just using a text stamp that I had for a long, long time. I think this is also from the Etc. Collection from one of Tim's stamps. And I'm stamping with black archival ink mainly around the edges. As a finishing touch for my background I'm going to add a little bit of Vintage Photo but in a form of splashes. So I did smooth that ink pad on my glass mat, added a lot of water and now I'm adding the splashes with a brush. One more thing that I like to do on my Vintage looking projects is to work a little bit with the edges. So on some of the edges I'm using my tweezers and just curling them up. I'm also going to create some slits with my scissors and then curl up the paper as well. I think it adds a really beautiful touch on a Vintage project. And you can see that it fits nicely inside my frame. And I would finally time to grab the dies, die cut them and put them together so that I can have my focal points. So for the focal points I'm going with both cups both the plastic one as well as the little cup and these dies are from the Colorize Collection by Cisix and Tim Holtz which means that you cut out all the pieces from different colored cardstock and when you place them together you have all the shading and the highlighting that brings the image to life. At the back of all these dies it tells you a suggestion on which colors you need to cut them out however I went mainly with vanilla, craft cardstock as well as a touch of red for both my cups. So here you see I have all the pieces together on some of the pieces I do ink up the edges with Vintage Photo and then I'm going to glue everything down. In this video I'm not going to go into detail on how you can put these cups together. They are really self-explanatory all you have to do is to look at the packaging and just decide the colors that you want to play with. There is also a video available in the Cisix YouTube channel or how you can put these colorized images together. So here are my two cups ready to go just mainly with craft, vanilla and red cardstock and now I want to create one of those projects where you create kind of a cluster a great way to add texture and some dimension on your projects is to use corrugated cardstock. I did cut a piece of it and I did cover it up completely with my black gesso. Black is the color that I have on the frame and I think it is nice to bring that black on my project somehow where I have the cluster area. This is also going to provide an area for my cups to sit on top so they don't look like they are floating on my project. I will use my scissors to cut off the excess and this is a texture area by Team Holes that is self-adhesive. However you can use just a piece of cardstock from any box that you have at home. Now I want to introduce somehow this burlap but I don't want it to lay flat directly on top of the corrugated area so I'm going to use the leftover piece to lift it up a little bit so it does have more dimension. So I'm going to stick that there you won't be able to see that it works just as a foam tape and then I will use a piece of double-sided tape on top of that so that I can peel it off and stick that burlap on top of that you won't be able to see the double-sided tape through the burlap. And now let's create the cluster as I place the cups on top I feel like I need something at the background to help them pop even more that's why I will use this piece this is from the ephemera pack so it's just a piece of a map that I'm going to create a pocket out of. I will be able to tuck inside that pocket different elements in ephemera to make my project more interesting. For that I'm using a circle at the top and I did try to eyeball it so that I have it at the center I'm going to secure it down with a wash tape and run it through my die cutting machine and I think it looks more like a pocket now where you can slide things in and out. I'm also going to ink up the edges with vintage photo so that this element has the same touch and feel as the rest of the elements on my project. Now I definitely don't have everything planned on my mind from the beginning I just play as I go So here I did a play start at the back and I didn't like the way it was so empty and I wanted to produce something extra like a red detail just like the red detail that I have on the cup that's why I did stick on top and extra ephemera piece and because I like to repeat techniques on all the elements on a project it kind of brings everything together I did also some stamping with my black archival ink Now at this point I was thinking that I want to have some different ephemera inside that pocket So I'm going to grab my foam tape and this way I will stick two pieces on each side of the pocket This is going to give more room inside the pocket and I will be able to insert elements easily inside and out Also I'm not going to add the foam tape all the way to the bottom I really don't care what happens down there After all I'm going to tack that behind the cups So you can see here my pocket goes in place and again on top of that I'm going to place the cups Now I will use some foam tape at the back of that to help them be levelled along with the base and I'm also going to add some thick paste at the bottom This is gel medium, thick gel medium so that it grabs nicely where that corrugated cardstock is and that burlap Now about this theme I did use the die to cut it out many times from the same vanilla cardstock and I did stack one on top of the other This way I ended up having a steam that looks more like a chipboard nice and thick Now for the inside of my pocket I was thinking to use some words that kind of describe all the things that you want to do throughout the day So today you want to dream you want to love you want to create you want to love to dream to travel and you can use as many of those words as you wish I decided to use these flashcards This is a packet by Tim Holtz that I had for ages and I don't think if it is still available If it is I'm going to link it down below If it isn't you can always print out words like this and use them on your project You can just stick them inside that pocket like that or like I'm going to do here after inking up all the edges I'm going to use my crop-a-tile to create a hole through all those cards and then use one of those rings to keep them together I like this because it's going to add a metal element on my project after all it is mixed media and at the same time it adds extra dimension So this pocket actually includes my to-do list of beautiful things that I want to do throughout the day and I will use a tiny alphabet stamp that I have in my stash to stamp to do on top of the pocket and again I don't have everything planned from the beginning I just have the general idea when I'm starting a project So here I had another idea and this is where I'm going to embellish this to-do list even more I am going to use some phrases from this sticker booklet which is full of quotes and I'm going to pair them with the flashcards So you would have be awesome today best day ever on the flashcard that says love all you need is love on the flashcard that says love for create I went with do what you love love what you do and so on I did use an alphabet die this is by Waffle Flower the retro one and I did cut out the letters that spell love the word coffee So I'm going to stick them down these are quite bigger than the actual space but I'm going to play with them a little bit stick them up and down so they are going to fit nicely exactly where I want them to go every day when I wake up before I do the wonderful things that I have to do for the day I just have to drink a cup of coffee and that's where the whole idea came for this project So you see I created a pocket with all the wonderful things that I want to live throughout the day but first coffee and I just used my laser printer to print out that phrase now if you remember we did create that beautiful frame but you don't really see that so let's help that and bring all that detail more to the foreground for that I'm using a workspace this is the old silver one by Prima I am applying just a little bit with my finger all over the place I'm not going to completely cover it up I don't want that to be super vibrant and super shiny so very lightly I'm going over and you can see how it brings everything to life I will also use the wax on the sides it's going to bring that wood grain into life too that we have completely covered with the gesso remember that this is a wax based product so it does have some smell I don't mind I actually like this smell if you feel that it is quite overwhelming there are other products in the market that like Nouveau for example Nouveau Mousse that you can use instead and that was the project for today I hope that you had fun that you got inspired I absolutely love it it's going to decorate my craft room and probably my kitchen I'm not sure yet and I like going through that little list of wonderful things that I would wish to happen throughout the day after I drink my coffee so I hope that you had fun and that you got inspired on these weeks mixed media Tuesday you will find a list down below on everything I used don't forget to like the video as well as leave me a comment it really helps and also subscribe if you haven't done so already if you had fun watching share it with your friends thank you all so much for visiting today and I'll see you all next time