 Γεια σας, είναι Βικη, εδώ και κατασχαριστούμε. Σήμερα έχω ένα πολύ καλό καρδί για σας και θα χρησιμοποιήσω αυτές οι δυνατές από τον Τονιξ-Τοδιος. Αυτό είναι ο Φεστήφ Ζάιν-Πωστς και θα δείξετε τα δυνατές για να κομμάσεις το Ζάιν-Πωστ. Θα ανοίξω να ανοίξω για να δείξετε τι είναι το βιβλό. Έτσι, έρχεται με όλες τις διαφορές να κρατήσεις το Ζάιν-Πωστ και τρεις διαφορές να κρατήσεις το Ζάιν-Πωστ. Έτσι, έρχεται με όλες τις λαπίτσες να κρατήσεις το Βιβλό και ένα σνόμπανγ για το κόμμα του Ζάιν-Πωστ. Τώρα, αυτό είναι το σνόμανγ και το πέγγουιν και νομίζω ότι είναι απλά αδόραμμα. Τα δυνατές κάνουν πολύ καλό φορά, επειδή είναι πολύ μεγάλη. Μπορείτε να έχετε δυνατές σε ένα καρδί ή μπορείτε να έχετε δύο σνόμανγ. Μπορείτε να κάνετε δύο σνόμανγ ή δύο σόμανγ όπως θέλετε. Παρακολουθώ να τα κάνω από το κόμμα, γιατί βλέπεις τι είναι μέσα. Είναι παρακολουθεί με νομίζεις και υπάρχει ένα λίγο καρδί εδώ σε το πέγγουι που παρακολουθεί τι είναι όλες αυτές τα δυνατές. Έτσι, θα καταλαβαίνετε τι είναι το νομίζω και τι είναι τα δυνατές για το σκάφετο, etc. Τώρα, σε αυτό δεν υπάρχει καρδί επειδή όλοι είναι πολύ εξπανή. Τώρα θα αφήνω να τα βάζω στον παρακολουθείο του. Το παρακολουθείο του είναι πολύ σκοτός, όπως μπορείτε να δείτε, και είναι σαν ένα σκάφετο, γιατί αφήνει και κλώσει εύκολο. Και να κάνετε σωστά, ότι δεν θα μεταξύψετε. Είναι έναν καλύτερο σκάφετο. Σήμερα θα βρήκαμε ένα καρδί, γιατί θα σας δείξω τα δυνατές εδώ. Πρώτα, θα ξεκινήσω με ένα καρδί λετρασμένο, θα το βράσω σε 1.5, γιατί είναι σε 5.5, και θα το βρήκαμε με ένα σκάφετο, και θα το βρήκαμε σε 2.18, και θα το βρήκαμε και θα το βρήκαμε σε 2.18. Τώρα, όταν αφήνω τα δυνατές, θα έχω ένα καρδί λετρασμένο, γιατί είναι 4.25x5.5, αλλά αυτήν τη φορία μου have a nice opening like a gate. Τώρα θα λάξω σε ένα σκάφετο και θα μπορείς να δούμε να είναι σε 4 δυνατές. Θα μπορείς να χρησιμοποιήσεις μόνο το έργο, αν θέλεις να δεις ή μπορείς να χρησιμοποιήσεις τα σκάφετος που είναι πραγματικά σκάφετος. Τώρα, ένα από τους μπορεί να μπορείς να χρησιμοποιήσεις τον πρόρο της σκάφετας σας. Τώρα θα βρήκαμε μείνονα σκάφετο και θα θα το βρήκαμε σε όλες τα σκάφετο. από έναν κομμάτι και να χρησιμοποιήσω τον καλύτερο μου μέρος να χρησιμοποιήσω τον κομμάτι, διότι να χρησιμοποιήσω με διαφορετικά λίγο πιστόνες από έναν κομμάτι, αλλά αυτός είναι στους εσείς. Και είμαι also going to cut out all the pieces that I need for the little bird, as well as for the signpost, the saying on the signpost and I went with the one that says North Pole. Now I'm going to use one of those sticky papers and this is actually double sided tape, so I'm going to peel off one side and I'm going to apply it on top of a white cardstock and once that's there I'm going to peel off everything and then I'm also going to peel off the top so I end up having a cardstock that has one side full of adhesive. Now instead of using a sticky tape if you don't have that you can always use double sided tape to completely cover up your paper and then on top of that I'm going to apply this new product this is called sparkle dust and the color I'm using is snow glow and it's going to turn my paper into glitter paper. I didn't have this kind of glitter paper so I decided to create my own. Now this is perfect for creating snow it gives a beautiful shine and this is really fine glitter it's not chunky at all so it sticks perfectly fine on top of the adhesive and it's not going to go anywhere. Now I'm using my bone folder over it just to make sure that everything is nicely adhered and another thing that you can do to make sure that the glitter is not going to go anywhere is if you run it through your die cutting machine. Now I'm going to cut out of this glitter paper that I have created a couple of snow banks as well as different parts for the snow and the snowman and if you don't have those dies for cutting out the snow banks then you can just use your scissors and create a little curve. Now I have created two panels out of blue cardstock and these are four by five and a quarter so these are just a tiny bit smaller than the standard card which means that when I place them on top of my card I will have a white border around it and this is the same case for the inside of my card. Now these blue panels are going to be the sky. So I'm going to apply some tape adhesive at the back of my snow banks and I'm going to stick them at the bottom of those blue panels so I'm going to use one of them at the front of my card and the second one on the inside. As I place that on top of my card you can understand that I need to cut it in half and since the width is four inches I need to cut it at two inches exactly. And as you have probably noticed I'm using the Timholtz kilo tin which I really love. I have been using it for a couple of weeks now and if you want to see a review on this I would gladly post one and I'm going to mention both of the advantages and disadvantages since this is not going to be a sponsored post. Now as you can see I'm applying some tape adhesive at the back of those two panels and now I'm going to place them directly on top of those two folds making sure that I align correctly. And I'm going for a little scene on front and on the inside of my card today so this is going to be a beautiful background. And now since I didn't use colored cardstock for cutting out all the little pieces which of course you can go ahead and do I decided to go and color everything with my distress inks and my dabbers. Of course you can use your watercolors you can use your alcohol markers anything you fancy and I don't know if you have noticed but those dies for the wooden planks give actually a beautiful detail and it is going to show now since I have applied my ink and you can even use them as a stencil so you can place them directly on top of your pieces and then go over them with a darker ink just like I'm going to do here which is going to make that detail even more vibrant. I will use the same technique for coloring the rest of the pieces and as you can see I'm working on my glass mat I did a review a while back on this glass mat and to tell you the truth the more I use it the more I love it and now it's time to assemble my signpost I'm using some white glue at the back and I will start sticking one on top of the other and as I'm doing that just to let you know that as always you will find links down below to the description area as well as on my blog on all the products that I'm using today and I'm also going to make sure that I link you to both US and UK online shops for your convenience. For the top of your sign you can use three different sayings that are included in this die set one says Santa Stop here the other one says Rudolph this way and the one that I am going to end up using is North Pole. When you are creating a gatefold card the flaps when you use heavy card stock tend to stay open so I'm going to keep them closed using magnets Now these are very thin magnets hopefully you can see how thin they are and they have a sign on top of them so you know which goes with which one I'm using a plus one and a minus one and I'm going to hide to hide one of them behind the sign post and they are self-adhesive so they are very easy to use I'm going to stick the other one on top peel off the backing and now it's very sticky I decide where I want this to be on the front of my card and I'm going to press so that the second magnet is going to stick directly on the inside of my card Now each time you close the card those two magnets are going to fit nicely one on top of the other and they are going to keep that card nicely closed and I use some white glue at the back of my sign post to stick that in place I'm also going to stick the bottom for my sign so that it doesn't float there and the front of my card is pretty much finished and you can see that those magnets grab together even when you have the other fold closed they are quite strong so no matter how many layers of paper you add on top of them they will always grab one on top of the other so you see here you have to cover up this magnet with the paper and my background for the inside of my card is ready and even with all those layers of cardstock the magnets work perfectly fine Now for the inside of my card I'm going to create a little snowman and I love this die because you can interchange different pieces you can make him as high or as short as you like so there are actually three different pieces for creating your snowman but I don't want him to be so tall and I am going to omit the middle one so I'm going to use the main body as well as the head and that's a great thing about those buildables these come from the buildable collection by Tonic Studios that you can mix and match different things and create pretty much your own designs now I'm going to use the dies to cut out the scarf his nose his eyes as well as his ear muffs and again just like I did for the front of the cart I'm going to cut out all of these in white and then just color them with my distress inks after quickly coloring all the bits and pieces it's time to assemble my snowman so I'm going only to use those two pieces the head and his body I'm going to attach the scarf and I have cut out two pieces for the the edges of the scarf and I like those because you can place them anywhere you like as if it is there is wind or not so you can actually use them to give some motion and interest to your snowman now there are tiny little dots that you can use for adding buttons on the body of your snowman I'm not going to bother with those tiny little ones I just cut out two of them and color them black to add them as his eyes and I really like using white glue for sticking all those different pieces on my card just because it gives me a little more flexibility so that I can slide them until I'm happy with their placement and for the outside of my card I'm going to stick that little birdie that I have already assembled I have actually attached him with some foam squares at the back and my card is pretty much finished all I need to do is to add some finishing touches such as a black dot for his eye and I'm also going to bring in some white NuvoDrops to create some snow and here is a close up look of the card hopefully you can see the shine on the snow as well as the dimension that I got from the NuvoDrops and hopefully you can see how that magnet grabs nicely all through those layers and keeps those gates shut and I still have enough space on the inside of my card to write my note here and write it on the flaps There is also this magnet that is visible if that bothers you you can always cover it up with another piece of paper I don't mind so I'm just going to leave it as it is So that was the card for today I hope you had fun as much as I did while making this card I think it's just adorable Here are some close up photos of the card that I made today Don't forget to comment, like and subscribe if you haven't done so already Thank you all so much for watching and I'll see you next time