 Γεια σας, είναι Vicky here και παιδιά σας. Σήμερα έχω ένα καλύτερο καρδιωτικό καρδιωτικό χώρο, χρησιμοποιήθηκε σε κομμάτι, σκοτές και τάσεις. Είναι ένας εμπλόγος που εξελίξε την κατάσταση πιο τελευταία. Παρακολουθείτε να δείξετε τον καρδιωτικό μου καρδιωτικό να ξέρω όλα για αυτό. Φυσικά, υπάρχει πολλή εμπλόγη και πολλές κύβερες. Αν δεν είτε γινάτε με αυτή η εμπλόγη, η ιδέα είναι ότι αντιμετωθείτε έναν εμπλόγημα και πάνω να χρειαστείτε ένα από τα κύβερες να τα βάζετε πιο παντού, και όταν την κύβερες να φύγετε, είτε τα κύβερες πάνω ανοεί. Βοήτερες έχουν πολλές εμπλόγες που έχουν υπάρξει, θα σας δείξω μόνο εδώ και θα δείξω πως they work. Φέρω ότι αγώνατε τα αγώνα και τα γράμματα που τεχνούνται και τα ρούν. Έχουν θάμπεις όσοι καταλαβαίνουν τα μέρια που εφημερισθεί. τόσο τόσο θάμπεις που εφημερισθεί με εφημερισθεί που δεν αρχιζουν. Έτσι μπορείς να κονταλιστείς εφημερισθείες για να κομψάξεις τα πιόση σας. Έχουν εφημερισθείες για να βοηθούν τα εφημερισθήματα. Αυτό είναι το σλυδε. Το πούλ σλυδε και αυτό είναι το δύο σλυδε. Αυτό δίνει δυο σλυδες, ευκαιρήσεις. Οπότε θα χρησιμοποιήσω ένα από αυτές για την καρδιά για να σας δείξω πώς λειτουργεί. Τα γρήτια έρχονται με κάθε στάμψετο, αλλά μπορείς να δείξεις περισσότερο από αυτά. Τώρα φυσικά αν δεν θέλεις να χρησιμοποιήσεις την καρδιά, υπάρχουν και άλλα χρώματα που έχουν και αν θέλεις να χρησιμοποιήσεις your own, δείξεις ένα από αυτά's που μπορείς να χρησιμοποιήσεις από πολλές χρώματα που έχεις, or any pattern paper. Τώρα έχεις also the option of stamping the image by using black ink as I'm going to demonstrate for you here, but you can also have the option to stamp them with different colors. So I'm going to show you here how it works with black ink and then if I place the grid on top and slide it, you will see this little duck jumping up and down. But of course you do have the option of stamping the duck in other colors and that's exactly what I'm going to demonstrate today. And you also have the option to use the grid die to cut out your very own grid out of any colored cardstock. Now I'm just going to show you how this one is going to cut out. Make sure that you use the precision platform, if you are going to cut it out with your physics machine or a metal like I'm using here. This is going to make sure that it's going to cut nicely. I'm also passing it through a couple of times. This is a very intricate die so you need to make sure that everything is going to cut out nicely. And you can see that it works fine over the stamped image. Now for today's card I'm going to use the black grid but I'm going to stamp the little duck with color. So let's go ahead and do that. The adorable duck is actually from the Be Happy stamp set. I'm going to stamp here with orange ink and I'm wiping clean the eyes. I'm going to use black later on to do that so I'm going to do some multiple stamping and that's the reason why I'm using my stamping platform. I want to stamp on top of the same image again and again. Now I'm just trying to make sure that the eyes are clean. I'm going to stamp the image one more time. I did get a good impression but I will go ahead and stamp it one more time. I need to make sure that this is going to be nice and vibrant and really crisp because I wanted to show through the black grid that I will be using later on. So I'm stamping one more time and now I'm going to use a black memento ink marker and I'm going to add ink only on the eyes. Because I'm working with a marker I didn't get a very crisp image so I'm going to do it a couple of times just to have that black ink nice and vibrant. Now although I will be using the black grid later on I just want to show you that it really works with the cutout grid so I'm going to slide it here and you can see the duck jumping up and down. I'm going to show you that you can add even more color on your image so I'm going to use a yellow marker here. This one was quite dry so I'm using a yellow marker to color the beak and my duck is ready. It looks kind of funny but when you place the grid on top it looks perfectly fine. Now to create my window I'm going to use the pull slider die set. It gives you lots of dies, two of them are the main dies that you need. These are the two ones that I have here and to put them together you need to make sure that you fold on every little crease and when you use those dies they actually create those scoring lines for you so it's easy for you to just go over them with your bone folder and reinforce them. Now this is actually going to be a stabilizer for that slider piece and they actually have motion crafts, have a video which is very basic and step by step that you can follow easily to create this. I just saw that and it was easy for me to recreate it and I'm going to make sure to link it here and down below the video. Now I'm using little pieces of double-sided tape and on the stabilizer and this is actually one-eighth of an inch double-sided tape that really makes your life easy when it comes to putting these slider cards together. So I'm going to place it there and the flaps are going to go over the big window cut out and you will see that later on this is going to make a big difference on stabilizing your card. Now all I'm doing is adding this double-sided tape all around that window and then I'm going to stick the grid on top and of course don't forget that at this stage instead of sticking down the black grid you do have the option of sticking your own grid that you have created with the die or the ones available in the market that have different colors and I do have to say that when you use the black grid it really makes a big difference the animation really looks more crisp So I have a panel here this is a standard card size and I have also used a circle die to cut out a little window I also used one of the dies from the same slider set to cut out this tiny little slit and this is where you can fit inside that little tub. So I have a standard card size here that I created from orange cardstock I'm going to stick this little guy on top making sure that he is going to be nice and centered through that window that I have cut out and I have also cut out different pieces from the same slider set to embellish my card even more so there are little tabs that you can stick on top of your main tab just to embellish it a little bit more and I used the same cardstock the orange cardstock for that with the circle dies that I used to cut out that little window there I nested them one inside the other to create a little ring to place it on top for a more finished look and now finally it's time to put everything together so I'm going to take this window slide it through the slit so the tub comes at the front and notice how I have some double sided tape on the two sides of this panel at the back now you need to stabilize this somehow and remember that die that we had at the beginning that I called a stabilizer this is exactly where I'm going to add a strip of double sided tape so I'm removing the backing and now I'm going to stick that at the back now this is going to stick down only the stabilizer but not the whole window which I will be able to move easily with the tub now all I need to is to remove the backing from my two foam tapes and put everything together for my sentiment I used one from the same stamp set as the little duck that says just wanted to say quack I used VersaMarking and white embossed it and I'm keeping this card really simple just like it is I think that this animation really makes the card and it is really mesmerizing you can play with it all day long just watching the duck going up and down so that was the card for today I hope you had fun and got inspired don't forget that this is part of a blog hope celebrating the new release so make sure to visit my blog to learn all about it and enter the giveaways thank you all for watching and see you next time