 Hey guys Care to join me while I make a set of wind chimes for monkey. Stay with me. Okay guys This is some of the stuff. We're going to be using we've got a two and a half inch hole saw here that's what we're going to be for the Clacker thingy that goes in the center. We're going to use some of this pipe here. We've got this aluminum pipe It's three-quarter inch We've got the saw to cut our wood and We've got to cut off wheel to cut our pipes. I've got a sander laying down here somewhere There it is I've got that in case I need to de-debur these pipes So and I got this to make our Circle of where? Where our chimes are going to hang so I'm going to use this as a template just Draw around it. So this is what we're going to use guys. So This is not really a how-to video as much as it is I'm just going to make monkey something. So All right guys, so I'm going to get set up here and get started on what we've got to do Okay guys, this is what I've got I've got this cut five and a half inch square. I Got these cut at all different lengths now in the description. I will put the Dimensions and all that in the description the website that I got this off of They said Copper but I'm using aluminum. You can use whatever you want It just gives it a little different sound and I've already got them drilled to what they're supposed to be But I'll leave all that in the description And I've got this marked out Okay for where all my um Little hooks are going to go I've cut this three inches long kind of made a little little triangle Now I've already got that pre-drilled at the top. Okay, so Now this is going to be a three-tier. This is four and a half inch square and this is two inch square did I say four tears going to be three tier and then the the The chimes won't hang off of it. So I'm going to go ahead and pre-drill these and get the hooks in them. Oh, yeah, I also got this okay the Clapper thing that moves around back and forth and hits each one of these. So I've got that and I'm going to go ahead and get those those put in there there's the center hole and and Then I'll I'll show you how I'm going to string these up. Okay They're going to be seven inches and I've got some white string for that it says in the instructions twine Again, use whatever you want. I got some white string for that So let me get these pre-drilled and get my hooks in there. All right guys What they want is they want your chime to hang Seven inches from your hook. Okay from that hole to your hook So what I've done is I've made these 15 inches okay that way it gives me room to tie a knot. Okay, so I've cut them 15 inches that way When I measure it like that, it's going to be roughly seven and a half ish Pretty close closer to seven. So what I'm going to do is I I've drilled a 530 seconds hole all the way through that through that pipe and I want to take one end. Oh And I've took my this is just it's something like this the cordage you use on your blinds You know how you're always feeling around the blinds. They never want to step on it. That's kind of what this is Okay, we got a bunch of it over there So and I just heated the end of it up and just like that kind of melted it So so that way it doesn't fray and it's a lot easier to put through now I'm going to put this through this hole like that and I'm going to make sure it comes up and out Just like that. Okay Now I'm going to do the same thing With this side. Okay. Look how dirty. I got my string already I'm going to get this Stuffed in here Hmm. I made that one worse. So now I want to take this one on the opposite hole Now I'm going to take this side on the opposite hole. I'm going to push this up through there The same way and I'm going to bring it make sure it's going up and not down And I'm going to bring it out this end here See there it is So it's starting to come up through there right there Push that keep going Till it comes up through and I've also deburred these holes the best I could I just took After I drilled them. I kind of filed them off a little bit and then I took this It's a piece of an old Trouble or a test light that I've gotten I stuck it in there kind of wallored it around you can see there And just kind of made it smooth so it doesn't cut the So I want these to be even up here at the ends like that Or somewhat, you know close see that way it hangs nice and straight. Okay Now I'm just going to tie this into a knot Maybe Like this I know you guys can't see enough and bring that around hands Try to get it up there As close as you can to that. I know the knot it looks big on here, but it's not trust me and see then Like that and then this will hang Off of there just like that Okay All right now I'm going to do that to the rest of them And then I'll get back with you and show you how we hang the the center part with the sail and All right guys, so this is what I did in the middle The the instructions or whatever didn't say how long that middle piece should be Or where this should be at so I kind of put it in the middle a little bit And I kind of just brought this down about Oh, you know another seven inches down to the sail And of course it's not hanging real straight because I just got hanging up here on the garage door for now So I could tie that and I just ran one string from the center down and I just double knotted this thing so So we're going to hang it up here on the corner of the house And we'll see what it sounds like Okay, we've got a little breeze going it keeps stopping but I'll move it around there pretty cool Now, you know just a little project you can do like I said this not really how to it was just sharing with you what I'm doing But I will put the description In uh down below so you guys can uh can do it yourself. So There you go just something Something to play with there so Hopefully you should like it when she gets home We'll see Thanks for watching guys. Shea bear the myth the man the legend. I'm gone for now. Bye. Bye you guys take care