 Hi, lady. What is this? Hey, I'm working on revC of my ESP32S2 Feather. And you might be wondering, well, why did I have to revise this? Well, I kind of messed up the power stuff a little bit because I had the pull-up resistors connected to the 3-volt line and I'm switching on and off the power. But if you look here at my PPK output, my power never really gets below about 720 microamps, which is really, really high. If you look at my oscilloscope, the voltage never gets below 1.3 because I'm getting that leakage voltage from the 2, 5, 10K pull-ups. They're kind of self-powering or back-powering the iSquad C bus. So with revC, I switched it to user regulator. So when I swap out to this revC PCB with the exact same code, first thing is you see that the voltage definitely goes between 3 volts and ground. And on the power test, zoom in and enhance. We get down to about 70 or 80 microamps.