 Let's do some work on this trailer cut some stuff off of it cut it in half what not first thing we're going to do is take some measurements Stick around join me. I Can maybe use a hand or two. Okay guys. Here's this centerpiece these two gray bars that gray bar there and that gray bar there That's one piece it apparently with some kind of Exercise equipment Judging from that these things are not These things are not that solid here So what I think I'm going to do is I'm going to cut these down and I'll use them I do believe that's what I'm going to do because These things are not that That's sturdy That's probably what all What I'll end up doing is I'll just cut them down and make that a floor after I Cut this down of course. I'm going to you know narrow this One foot. I got let's get some measurements Let me take some measurements and let's see Let's see if we're at five feet that way I know how much I'm going to have to cut down and mark so that's why I'm going to leave the sides on just Just for right now so I can get a square, you know perfectly because these These edges back here around on this See can't get you know for my mark, but up here I can take my you know, I can get a better measurement from my marks on that and Mark it Actually, that's Yeah, that ends round it right so that way I can get a better. I don't know You know when you get something like this you don't know See like here See this is even this is even with that Over here. It's not so I'll be off on my marks So I won't be able to do it that way what I'll have to do Let's get these stupid rails off here first Okay, we got the rails off now. I still don't know how We get to the center of this thing hold it on here, which I'll be welding it So I'll cut that bolt off Because I'm gonna mark the center Well, I've cut it I've cut it twice like if I if I take off a foot I gotta find my center How to mark over six six inches make a mark come over six inches and make a mark and do that on This front one here and that back one there And then I'll cut it and I'll bring these two together I'll have to do the same thing for the axles Or what what he's calling an axle so I'm gonna have to take these bolts out Either way any anyhow, I'm gonna I'm gonna grind these off these welds and try to get these These side pieces off of here so that'll be the first thing let's go ahead and grind them off and get these side Pretty much the deck off of it and then we'll go from there see this tongue There's nothing square about this trailer. It's just eyeballed and it's not eyeballed very well because if you see this tongue It's like over this way And I can see back here in the back It's got a bend to it. So that's all You know, I'm gonna have to do something about that like it says not gonna ever be behind the vehicle, but You know, I still want it done halfway, right? We're gonna build something out of it Like I said, I may use these for like the floorboards inside come down or whatever and just lay them down That's a good possibility of what I might do and You know put some treated lumber in there. I'm not sure yet about that. We'll just have to see But these things like I said they They're so flimsy They're not made for for this kind of stuff So Eventually shit's gonna start bending and breaking at any you know at a give point So let's go ahead and get these cut off and it looks like a car dolly in a way, don't it? So this is what I don't like see how this is rounded here and These are square really don't like that. They've got the axle axle welded on to here. I thought about Cutting this down But I I don't have anything to put across here You know square tubing or rectangle tubing so I'm probably gonna have to leave it like this. I still got to cut it down to make it make it thinner, but I See I can measure from the inside or outside whatever Probably I would go from the inside of here to the inside of that on the other side But then I got a transfer from here I got a transfer my marks over here I don't even know if this measurements right here if the tires are right. I Mean they look close, but that don't that don't mean anything Like I said, it's never gonna be behind an automobile, but It just When you do stuff and you just can't throw shit together like this Because you're going to end up with what it looks like and it looks like a piece of junk All right, let me take some measurements. Okay guys. I've done some measuring from the outside of That to the outside of this now that axle is pretty much center It might be off of 16th. I'm not worried about that. This is centered right in here so I took my mark from that but This thing from the outside of that side to the outside of this side five foot four inches These are one inch wide Okay, so inside the inside five foot two inches So I'm going to take off an egg exactly one foot Which you can see here Here's the center okay of my of The tongue So I'm going over six inches there six inches there same way with there that mark there That mark there Same with this this mark This mark okay, so I think what I want to do I know these are right try to Try to come across here and make sure this is square But anyway, I don't have a big t-square. I wish I did but It's going to be close So I Want to cut this off back here first Okay, we'll cut that center the centerpiece out first and then I think I'm going to go ahead and cut that off That went off and Then you know I've got to I got to take these bolts out I may Just cut all the way down through that and through that that'll still give me room to put bolts back in if I want But I'm not sure There's still one I have to come out But let's go ahead and let's get to cutting on this thing Now I know what a lot of you guys are thinking it's not going to be square. I know it's not It's not going to be perfect, but it'll be close enough to pull behind a garden track Okay guys, I don't know if you've seen it when it was sped up, but I stepped on this end to try to raise it up a little bit Right there. I mean You can't Know you just One bolt Well, I got two up top but that one bolt, you know a couple tack welds You can't you can't do shit like that guys All right Put you on the charger for a little bit. Let me get some of this cleaned up and I'll get I'll get my game playing together Okay guys, what I'm going to do now is I'm going to tack this on this this corner in this corner Then I'll flip it up And I'll grind up grind it around then I'll go ahead and weld that around there I've got some steel in here. I am going to re reinforce this This axle here same way with the with the other pieces there. So Let's go ahead and give it a tack I left the gap there because I want some penetration down in there Okay, so I'm gonna flip it over I'm gonna do the same thing on the other side. I got a grind it off and clean it I'll be back with you I'll show you what I ended up with Okay, guys, this is what we're working on. That's my reinforcement there As you can see that's pretty decent welds on here But when I got down to here started acting funny on me skipping I'm gonna have to grind that off. I don't have to take whole thing off Just grind it off smooth and reweld it because I'm out of welding wire. So all out So I got to get some more welding wire before I can finish this So Anyway, that's where we're at That piece there. I think I may use for the tongue. I'm not sure I May need to use a piece of this but you can see how bent that was I mean, that's not holding up and that's I mean what and the trailer this big Was probably meant to pull something down the road. My god. That's scary. That's a scary thought All right, so stay tuned for part two of the trailer build my buddy. He's out here. He has a ancient buddy He has a good time. Don't you Bruna Bruna? Yeah, he uh He's helping me. So These pieces I got to finish welding these This one's done. I mean pretty good while I was in then it started messing up on me there I figured I was getting close to running out of wire This here turned out pretty good. I may not have to reinforce these You know most most of weights always out here on the end of your axles And I'm not gonna weight it down with a whole bunch of stuff. That's actually wider than what I wanted it to be, but It'll be fine You know, I'm just gonna be hauling stuff around the house maybe take some stuff down down the cell I got that inside cleaned off pretty well. So anyway guys That's what we're looking at so far. Now I get the fun task of Getting all this stuff out here Getting around back or something. I don't want the shit laying out here I'm not sure what time monkey is going to be back. So I Want to make sure she's got room in the driveway. So This I can wheel around like when that whole thing was together man. This thing was light I wheeled around here without any issues really But that'll give me some more time to do some playing I got this galvanized here Yes, you can well galvanize. You just gotta just gotta grind it off real well And you can weld it with no issues Her a lot of people say well you should wear a mask when you and well, you know what if you grind it Grind it all off of there. You should be okay If you're gonna be welding every day, of course But so These things here. I don't know what I'm gonna I don't know if they're strong enough to do anything with I Mean that'd be a lot of welding. You know to patch them holes up if I welded them holes closed. Yeah, it'd be strong as shit But that's take some a lot of wire So I gotta get some more welding wire and then we'll we'll get back on this So I want to see Bruno help me carry this stuff around back. All right guys, so There's kind of well the first episode was actually us getting the trailer It's hard to measure if that square or not being that this one side's rounded like it is but it's from what the measurements I took and I Like on the axle and stuff it seems to be Everything went back together Like when I slid it back together pretty much Kind of like where I where I made the cuts everything butted up nice I mean my cuts weren't that straight, but they did butt up nice and everything seemed to be fine. So I did do some measuring From the center and then on the right side and on the left side Before you get to the turn and it seemed to be It seemed to be okay. See that Bruno See that Bruno. That's the dog dog. How you better be good So it seemed it seemed to be right on the money there. So I'm pretty good good there You know, I'd like to have a full frame. I don't think I'm gonna be able to do that But like I said, it's not gonna be hauling, you know a thousand pounds Most I'll put on it. So, you know six or seven hundred so So anyway guys I'm trying to get you gloomy day, so I'm gonna get this all cleaned up and When I get some more welding wire, I'll turn you back on and you know, we'll commence to commencing So thanks for watching guys. Don't forget check out monkey 1000s channel and remember give this a thumbs up and If you haven't already, please subscribe hit the bell icon get notified of more stuff like this and Y'all enjoy the rest of your week tomorrow Friday and the weekends here. So Y'all be cool. Shea Berry meant the main legend gone for now. Bye. Bye. Take care