 Ευχαριστώ για το 7ο βίντεο της Κρίσμαστας Αρτ-Γερνάς. Σήμερα θα κάνω ένα σημαντικό κέντρο με αυτή η Κρίσμα στροφή, αλλά θα κρατήσω τα σημαντικά σημαντικά. Δεν υπάρχουν τάμπες ή τάμπες. Θα δημιουργήσω όλα από το σχέδιο. Θα δημιουργήσω ένα 6x6 πέπαιο και τώρα θα μπορώ να φρένω. Αλλά τελευταία, μπορώ να μπορώ να πάνω κάποιες κομμάτρες και να το πω στην Κρίσμαστας Αρτ-Γερνάς. Αυτό είναι ένα πέπαιο αρτ-Γερνάς. Και εσένας, το σχέδιο είναι 6x6 πέπαιο. Θα δημιουργήσω κάποιες πέπαιες μου πέπαιες που έχω δημιουργήσει μέσα από τα χρόνια. Έχω πολλά και πολλά από τα χρόνια από τα τελευταία χρόνια, από την Τυμ Holtz, αλλά αν δεν έχετε τέτοις πέπαιες, μπορείς να χρησιμοποιήσεις πέπαιες που μπορείς να κρατήσεις από τα Κρίσμαστας Αρτ-Γερνάς, ενώ θα πω ότι είarnos σερωτρουσιαστά στο χαρδίκτο. Πension θα μπορεί σκέψεις για πέπαιες, μπορείς να χρησιμοποιήσεις πέπαιες που έχουν θεωρία από τα Κρίσμαστας Αρτ-Γερνάς, μπορείς να χρησιμοποιήσεις και μπικούνες παραδοσιαστικές, ή ξεκίνησεις και από τα τεφήμερα που μπορείς να κρατήσεις και να βοηθεί σε το μπανάπο θα. Π partisan και αφού που μπορούσατε να αρχισούσαμε did, Η καλύτερα για να κάνεις αυτή τη σχολασική τεχνική για τις βαγγράδες είναι ότι μπορείς να βρεις αυτή τη δυνατότητα σε κανένα ώστε να κάνεις ό,τι πρέπει να κάνεις είναι να βρεις ένα κολλέξιο της σκράπτης, να το βρεις σε πίσες και να το βρεις. Παρακολουθείς ότι έχεις διαφορετικές πίσες, για να βρεις κάποιον kind of a dimension και να σας πω την πιστήση ότι δεν πιστήσετε, αν έχεις βρει πράγματα μέσα στον πιστήμα. Αυτό δεν θα δημιουργήσει σήμερα. Είναι ένα πιστήμα που θα θέλεις να δεις τι είναι το δημιουργείο εκεί, όχι θα δείξεις το σχολάσιο και το κόμβο και το στις τεχνικό. Λοιπόν, εγώ χρησιμοποιώ το μηχανό μου, ως τύπο, εγώ χρειάζω όλα τα πιστήματα. Και όταν βρεις, κάνω να το βρεις όλα τα πιστήματα. Η σχολάσική μηχανό που χρησιμοποιώ με το πιστήμα θα τους δίνει μια εξογραφή εξογραφή, αλλά, ευγειά, μπορείς να χρησιμοποιώ όλα τα πιστήματα. Βάθυε πάντα π ora, όλα τα προσπαθήσαμε. Εικά, χρησιμοποιώ το μηχανό μου να δεις ότι τα πιστήματα έχουν γραφίδους δεν έχουν τέτοιες σπίσεις, να παίξεις από όχι τα εξογραφία, όχι να δείτε πως βρίσκοντας πάντα να καταφέρω να αντιμετωθεί μηχανό μου για τα σχολάσια, αλλά θα τα εσάξω πάντω για να εγγράψω την πράσσα της, αν θα πω πώς τα κομμάδες εμπmens όταν προσπαθούνται, και why i changed my mind from time to time so here you should have a lovely background ready to stick a focal point on top however it is very busy plus you can still see all the images on those little ephemera and i don't want to draw the eye from the focal point so that's why i'm going to use white paint and you can use jesso for that i'm just using that fresco finish painted by paper archer which is going to give a jalky finish on the project and i'm working on my jelly plate and that's just because i want to use that as a palette i find that it makes the perfect palette for a braille so with my small braille i'm bringing in some of that white paint i'm starting from the edges towards the center and since i do have some kind of a dimension by sticking all those pieces one on top of the other you will see that the edges that are at the top grab the paint more so now this looks more like a background it is more faded out you can't tell what the designs are and they are not going to steal the thunder of the focal point and of course since i have all that paint left over there i'm just going to dilute it with water and add some white splashes and as i said in the beginning i'm going to keep the supplies minimal so no die cutting and no stamping i'm going to call this background done and i'm going to leave it aside to dry and let's work on the focal point which is going to be a lovely tree really whimsical looking i'm going to draw it and i'm not going to use any dies or stamps at all so i'm working on a six by six paper so i get a feel of how big i want my tree to be and i'm going to create a shape that looks like a water drop i would say because i want my tree to look quite whimsical i'm going to create the main shape and work it a little bit with my pencil until i'm happy with the outline i can always erase little lines draw new ones it doesn't really matter this is not going to show at the end that's why i'm using a pencil and now to make it look more like a christmas tree i'm going to create layers i'm going to separate it in four layers following the main shape of the tree but making sure that they look quite jabby to add on to that whimsical look and feel and of course if you want to adapt this design for a two page layout inside the book you can always create more than one trees that are thinner or fatter that are taller or smaller so that you can create kind of a whimsical christmas tree forest of course you can play around with your sketch as much as you like until you are happy with the outcome and then i'm going to bring it my scissors and cut it out and in the beginning i was planning to use these just as a template but you will see later on how i'm going to change my mind so i'm going to cut out all the layers individually if you are planning to make something similar inspired by these whimsical trees make sure to tag me on instagram i would love to see your trees so here are all my four layers as you can see i can easily put them back together like a puzzle and now i'm going to make a note on which side is the top so that i don't make a mess when i try to cut them out from patent paper now i did bring these two patent papers in red but you can use any patent paper that you like it would work with greens you can even make a rainbow of colors you can go really crazy with your christmas tree it's up to you what you want to create you can really get creative and it really depends on what patent papers you have at home so now i'm going to use those as a template and i'm going to draw a line around them and notice at the top i'm going to need a little bit more of a paper this is going to give me some area to stick the other layer on top but it's not going to show at all So after using all the templates to cut out your patent paper you will end up having something like that and when you place one on top of the other you can put it back like a puzzle and you can even play around with the layers tilt them a little bit to make it even more whimsical i think they are super fun now this is where i got the idea that i can use the template to draw some snow and use it on my tree After all it has the exact same shape and it's going to fit on top of the layers just like a puzzle of course on that white cutstock i do have some sketchy lines but that was made with a pencil so i can easily erase them and you can see here i have all the pieces that i need to create my tree which is going to be my focal point and i didn't use any die cutting or stamping i made everything from scratch i'm using my matme doom by ranger to stick the snow on top of all the layers you can see how lovely they fit on top just like a puzzle i'm going to use my matme doom to cover up everything on these layers and that's just because i want to do a little bit of shading later on so i don't want the area to be porous by adding that matme doom over it you are turning it into a non porous surface which is going to allow for smudging which is perfect for soft shadows i will repeat the same process for all the layers cover them up completely and then i place them aside to dry and this is really important for the next step make sure that all that matme doom on top of the layers is completely dry now one of my favorite methods to add some shading on cutout pieces is to use my pit big brush markers however i get a lot of comments that people cannot find the exact same colors that i'm using they are not discontinued they are also available in a wide variety of colors if you look for them with the thinner nib they do the exact same job and they are also called pit markers you will find a link below however in this video i'm going to show you different ways that you can do the shadows with things that you probably have at home this is a crayon this is the one by team holes but you can use something similar that you may have in your touch just because this is a non porous surface i can easily smudge it and create a shadow just like that now the fun part about this is that this is not permanent which means that if i don't like the shadow i can easily wipe it off with a baby wipe and i'm able to do that just because i have matme doom underneath another way is to work with distress markers or any other type of watercolor pen i like the brush tip on these ones better than the crayons because i can easily control exactly where i am adding the shadow the color that i'm using here is aged mahogany and the trick is to always use a marker that is a couple of shades darker than the actual color on your paper i like to add the color on where i feel the shadow should be and then i use my finger to smudge it out and fade it out so i end up having a lovely soft shadow shadows really make a difference you can see how more dimensional this layer looks and always remember that you can use a baby wipe as an eraser i'm going to repeat the same process for the rest of the layers adding the shadow just on top of the snow smudging it out with my finger and don't be afraid to go quite dark the darker the shadow the more dimensional your paper will look and i would finally time to put my tree together for that i want to add some dimension that's why i'm using some foam squares in between the layers and as i put together the tree on top of my background i decided that i wanted to have kind of a border to bring everything together with those reds on the tree that's why i bring in my decled edge trimmer and i'm going to cut out about one eighth of an inch from each side so this in the beginning was six by six but it's going to end up five and three quarters by five and three quarters and then all i have to do is to glue everything together i'm going to use my new water looks glue to stick the background on top of a six by six dark red cardstock and then i stuck on top the dimensional tree that i created i think it looks absolutely stunning and i love how it stands out against the background now i'm going to add a little bit of shading on the snow and you can go with a light gray or with a beige shadow depending on the look that you are going for with a light gray i would give a more of a cool tone look however i decided to go with a warm shadow that's why i'm using anti-cleaning here again following the exact same technique applying a little bit of color where i feel the shadows should be and smudging them with my finger to make them softer and now of course it's finally time for my black and white details here i'm using a white gel pen and i'm drawing some sketchy lines around the border and of course i'm going to add white lines around the outline of my tree this is going to help it pop even more against the background and i absolutely love the finished result now of course since i'm working on paper that has matte medium underneath this is non porous and i can always use a baby wipe to wipe off like an eraser any white lines that i have and i don't like for the background i'm also using my white gel pen and draw some bigger and smaller dots to look as snow i'm also going to draw a few stars here and there they're going to look like snowflakes just some marking at the background to make it look more interesting now i'm going to add some dots of glue all around the tree so that i can stick on top gems that are going to work as little ornaments you can also stick a little sequence on top to work as ornaments or create your own by cutting little pieces of paper you can leave your tree like that or draw the ornaments with your white gel pen now this is where i decided that i want a star for the top of my tree i'm going to draw it although i do have some dies for that but i did πρόμεση the beginning of the video that i'm not going to do any die cutting or any stamping again for the tree i'm going to follow the same technique so i'm adding a little bit of shadow just like i did with the snow and then i'm going to bring in a very fine black liner and i'm going to add some sketchy black lines now of course this is completely optional i think it helps all those different cutout elements to pop even more it is kind of an add-on on the shadows but it all depends on what you like to do this is where i cannot stop working on an art journal and i keep on adding more and more details i always like to add some quotes on my art journal so this is exactly what i'm going to do with this one i'm using one of my chipot quotes and i love how this is a red lettering on top of white i think it matches perfectly with my project So what was the project for today while trying to keep all the supplies that i used to minimal and sharing different options on the supplies that i actually used here are some close-up photos on the project where you can see the details better i hope you had fun today that you got inspired just like always you will find links down below to everything i used thank you all so much for spending some time with me today and i'll see you all next time