 Okay, YouTube, Shaber 1000 here today. We are going to be, I'm going to be showing you, it's going to be kind of like a vlog slash flea market fine video, although these items were not found at a flea market per se. We found these alongside the road, okay? Now, it was kind of like off of a state route and like a side street that was a county road. So it was kind of out a little ways, but these were sitting there with the, with some other stuff like some mattresses and some other things I didn't pick up. Looks like somebody was trying to sell this stuff and I just didn't want to take it home. So we were going past and I happened to look up and see the stuff. I was looking at the stuff and I'd seen the sign. I didn't know what it said and monkey said, free for all. I said, what? Or all free or something like that. I said, what? And she said, that sign said all free or, you know, so she goes, you want to look at it and I, well, hell yeah. So we turned around went back, I saw these chairs and these two little bicycles here. So, but the reason why I'm thinking they were trying to sell this stuff and just didn't want to take it home, like monkey said, they got prices on these and I don't know why they wouldn't have sold, but they got the chairs, four chairs, $4. They got a price tag on this bike bicycle of $3. And they've got one on this bicycle of $4. Now these chairs are in pretty good shape. Now these, of course, are wood with the wooden leg, but the inlays plastic, right? So, but they're in decent shape and I set this one out here. This is the worst one. It's got a stain on it. Looks like maybe chocolate or something. But the rest of them, I don't know if this camera is picking it up, but the rest of them look fine, okay? I mean, they could use a little cleaning, but I got them to try to resell cheap for somebody that may, may be able to use them. Now on this one, they got these things on the bottom. I'm not sure what that's all about, but I don't know, it's the only one that has them. I figure there's a little, there's little tabs on the bottom, like those felt tips might have come off and that's all they had, I don't know. But they're in decent shape, so this one's got a little crack right here on it, but I figure, you know, I'll clean them up and sell them. And now these bicycles, they're in decent shape. This one the chain's off of, but they, all the tires are flat. So what we're going to do today is we're going to shoot some air in these, well, that one's not flat, this one is, we're going to shoot some air in these tires and see, see if they'll hold air and if they don't, if I'll be able to patch them, because I'm not going to buy tubes for these bicycles for free when I'm only going to, you know, ask like five and ten bucks for them. So, you know, it just does, it wouldn't pay me to go ahead and put new tubes in them, but this one I think, I don't think those are the original wheels for it, they just don't match the bike, you know. I would think maybe the wheels would have been white. See how that one's like red, white, and blue. And this one's, you know, kind of like a, like a greenish white. It's faded, they've been sent out for a while, it looks like maybe, but, but I'm going to go ahead and get you up in the stand and we're going to shoot some air in these tires and see if they hold air. So we know that back one's already got some air in it. So let's go ahead and do that, and we'll check them over real good and see what they're worth. Okay guys, got to looking at this one, some bad news on the front one. The front tire does not have a tube in it, so I'm going to have to find a cheap tube somewhere, because I'm not going to put any money in something like that. It's free, and I'm, you know, it's not like it's a 30 or $40 bicycle, you know. I'm going to put 10 bucks on it, so I don't want to spend $5 for a tube, and, uh, you know, put $10 on it and have somebody talk me down to five and kind of wasting my time doing that. So, uh, but the back one, I believe you inflate these to 40 pounds. Where is it? Yeah, right there. 40 psi. Now they are a little dry cracked, but since there's a tube in there, I'm not too worried about it. Like I said, it's not a 30, 40, even a $50 bike, you know. It's not even a $20 bike. Um, it's just going to be for, you know, a kid to, to enjoy or what not. Uh, but what's interesting, I don't know if the camera, yeah, that is a Hong-Duh tire, not a Honda, a Hong-Duh tire. I've never heard of them, so it's a B.D. brand. Ha! So, I thought it said Honda at first. So let's shoot a little air in here and see if we can hear any, uh, leaks. Okay, guys, I couldn't find my tire pressure gauge. I don't know what happened to it, but this thing seems to be holding air. I don't hear any leaks. So it looks like the back wheel's loose over there, or the whole back wheel's loose. So let's, let's, uh, let's go ahead and get it flipped up and side down, and, uh, let's check this thing out real good. So what we got here, this back wheel's loose, so let's try to put this chain on. I mean, who knows why people do things, right? So, I mean, there's a reason for it. Um, the crank is loose, we're going to get it tightened up, and I actually may put some grease in that crank, so, yeah, so we need to adjust all that stuff. Brake works, and we'll adjust this back wheel, and how you do that, if you guys don't know, but I'm sure 90% of you do. These nuts right here, see, that one's just finger tight. You just loosen them, pull this back until the chain's to your desired, uh, yeah, tenderness, uh, to your desired tension. Make sure the wheel's straight so the chain don't come off, and so it don't track funny, and that's all you do with that. That's what we're going to do, but I got to get it a little higher up so this will spin for me. And this is the crank, just a single piece crank, um, it is loose, okay. So what we're going to do first, before we adjust the back wheel, uh, I'm going to take this crank out, you got to be careful there's little ball bearings in here, we're going to take, uh, this pedal off right here, we're going to take this crank out, and I'm going to put some grease in there, and, uh, I got to get in some shade, guys, and I'll get you re-situated, maybe I'll put you in the garage for this, and, uh, and we'll grease the crank, and put a little bit of oil on that chain, and, uh, we'll go from there. Okay, guys, I got to send the shade a little better, now the first thing we want to do before we take this crank out is, we want to take this pedal off, now these pedals have left handed threads, so that means you're going to turn it backwards to loosen it, so, sometimes these can be a real pain in the ass, but this one wasn't too bad, all right, now why that crank would be that loose, I don't know, because it's a left-handed thread as well, so that way when you're pedaling it, if anything it'll tighten it, now why that would be loose, I don't know, I don't know if it just happened to come loose or what, but built a lot of bicycles when I was a kid, you know, mom and dad didn't have, you know, much money, and, hell, I didn't know we were poor, you know, so we just built our own bicycles, there's the washer, it's got a little, a little tab right here, that way you can't get it mixed up, and there's a slot in here where that goes, now it's also got another little deal right here, that unscrews out, this is called your inner race, now hopefully the cage is still around, you guys can't see shit, why didn't you say something, the cage is still around these bearings, yeah I think it is, so that's cool, and it just comes off, now you're going to take this, let's take this bearing out, so a lot of times, like when we was a kid, it didn't have this cage around the ball bearings, see the balls, and if we would just put grease on a bunch of ball bearings, whatever we had laying around, and just stick inside there, and they would stay, and you'd hopefully they stayed until you got your nut on, but this one seems to be okay, there's a little bit of grease in there, but not much, so now let's go ahead and get this out, just like that, see that, let me back you out a little bit, see, it just pulls out like that, see, it'll come out, pulled out like that, and there's the other bearing, so it looks pretty good, cage looks good, the races look good, I'm gonna wipe these out real good, and I'm gonna put some grease in there just with my finger, and then I'm gonna put the bearings back in, self-explanatory, so I'm gonna clean these up as well too, so okay, I've got some grease in there, I've got the bearing in on this side, I've got it greased, and I'm using this high-temperature axle grease, bearing grease, that way when a kid gets going a hundred miles an hour, it won't fail on them, put that in there like that, it doesn't take a lot of grease, all I'm doing is kind of dipping it in the grease, smearing it around, you don't want to pack it, when we as kids we used to think that whole thing had to be packed, and one day my dad comes home and says what are you doing, I'm packing my bearings, see you don't pack them bearings son, they're ball bearings, okay dad, how do you do it, he said it just takes enough, because all that grease inside there is not doing anything, and he had a valid point, so my dad taught me a lot when I was a kid, now this is going to spin backwards remember, so let me get this grease off my fingers, then we'll get it all cleaned up, now they make a tool for this thing here, it's got two slots on it, one on each side, they make a tool for these, I never had one, I'll show you how I tighten it because like I said it don't have to be super duper tight, let's can see that, I just used a flat head screwdriver on these, hopefully these threads ain't stripped, and they don't feel like it, so that's pretty good there, now I'm going to take my screw driver, I'm just going to tap on that, so it's spinning around there, now we're going to put our washer back on, remember that slot I showed you, or that tab sticking out, it goes in that slot right there, and this is just called a jam nut, all that does is keep that major, or the major, yeah the main nut tight from loosening up, so we're going to put this on there, now this one you want to snug up, a fair good amount, but nothing can actually come flying off of it, but it can't come apart on you, a little snug but it'll be fine I think, so let's get our pedal back on, and remember this one's backwards, just give it a good, now let's get this chain put on here, and I'll show you how to adjust it next, okay hopefully you guys can see it's okay, so we'll just put this around here on the sprocket, the wheel's got a little bend to it, but nothing I'm concerned about, because this is not a stump bite, I'll just pull it back until that goes tight, just got to be snug, if your chain keep flying off on you when it's snug like that, then there's another problem, so it'll find a check on the brakes, all right they work, now I just got a little transmission fluid here, I got regular oil over there, but this is another thing, they don't have to be super, super wet with oil, okay, they just need to be kind of, don't even have to be really saturated, saturated, but because, and especially don't grease them, if you grease them dirt will get on these chains, and that's what ruins them, is too much dirt on them, and it eats your chains up, also if you don't have them, I know it's kind of messy, they make chain lube, but I don't like it stuff, like I say it's too greasy, and if you don't have them adjusted right, if they're too tight that'll wear them out, if they're too loose that'll wear them out, a lot of times what you may want to do, like if it's for, if your kid's around or whatever, or it's your bike, you know, get it on there and see how it feels, take it for a ride, because these chains, even though they're steel, they're metal, yeah I understand that, but they still will stretch, the back tire is still holding there, it's a shame about no tube in the front, nice, nice, so I'm just putting a few drops on, it'll work itself in there, and that's all you need, now take your, take your rag, kind of hold it on the chain, and take your excess, excess off, so that bike if it had a, so if this bicycle, if it had a front tube, this would be ready to go, so I'm not real worried about that bent wheel, so let's bring the little one over here, I shot some air in that front tire, they're holding air, so I think all I'm going to do with it is oil the chain up, yeah this one's in pretty decent shape, so I think all we're going to do is oil the chain up a little bit, and we're going to maybe wipe it down some, I don't know, like I say it's not, you know, a 30-40 dollar bike that, you know, if they want to clean it they can, but all right, so those brakes work, does not have front brakes, but it's got, it's got brakes, it's where you, when you spin the pedal backwards it stops, or it's also got hand brakes on it, on the back, so yeah we'll just give it a quick wipe down here, I may adjust that chain a little bit, but that's what we're going to do with that one, just gonna give it a quick wipe down, throw it out in front for sale, it's ready for a kid, okay guys, so that's, that's just the maintenance on the bicycles, I need to get a tube for the bigger bike, I think it's a 20 inch, and but also notice something else that I don't like, the way they've got this, this front brake cable spun around like that, I don't like that, anyway I'll get that spinning around because I'm gonna have to take that front wheel off anyway, and I'll get the brake adjusted, and that thing will be ready to go, as soon as I find me a tube somewhere, I might find you know, a free bicycle somewhere, another one that's junk, but has a good tube, I don't know, we'll see, but I'm not putting any money into them, you know, I just want to get something cheap for a little kid to enjoy, so that one there's ready to go, it's going up front, I'm gonna go sit in front of the fan for a minute, pretty hot out here, I think it's 90 degrees, so alright guys, thanks for hanging out with me, hope you enjoyed the vlog, and you know how to maintain your bicycle, monkey's got a bicycle round back, I made did get out if you want, let me know in the comments below, we'll do something with it, I thought about putting a little motor on it, but I don't want to put a hundred dollars in a bicycle motor, and do all that work, and sell it for a hundred bucks, you know what I mean, then I'm not paid for my time, so, but I think she she was talking about donating it or selling it, but we'll get it out if you want, and we'll check the tubes, and we'll get it all greased up, oiled up, and whatever it needs, so let me know in the comments below if you want me to share that with you, actually I'm probably going to anyway, because you know when I'm here by myself I get bored and I like talking to you guys, so listen guys, now I'm gonna say shebear 1000, the man of legend I'm gone for now, hope you guys have a good weekend coming up, and I appreciate you watching, don't forget to comment, rate, and subscribe, thanks again guys, and I'll see you soon, you guys didn't think I was gonna let you go that easy, did you, let's take a little ride, every time