 So my husband helped me put this X tool together and it took him about an hour from start to finish to get it all set up. All the instructions were really easy and well put together and made it easy to set up. This is a quick time lapse of him setting it up for me in our living room area. It's pretty easy and very self-explanatory to put together. So this is the X tool. My husband helped me set it all up. We did actually a few projects on this ready, which I will show you, but this thing is really, really amazing. Overall, I am super impressed by this machine. I used it for several projects and each time, each one turned out amazing. Here's a quick time lapse of me creating a wood sign out of a piece of wood. It is super special to me because I could personalize it for a memorial present for my aunt. I also created personalized doggy drawer for my dog kennel business and had a ton of fun creating these personalized tiles. Couple of things you're gonna need though is you need to always make sure that you wear these glasses that it comes with. Very, very important when you're using your laser. And then also make sure that you're working in a well ventilated area. I set this up with my husband in the living room and we took it out into our garage. And another thing really important to have is a really good tape measure. This one actually is in millimeters because when you're using your X tool, it's in millimeters. So this is really handy to have on hand. All right, so depending on how thick your pieces that you're going to be doing, you need to adjust the height. So I'm gonna lift it up here and I'm gonna pull this piece out. And it's gonna go down here. And you let it down and you adjust the side over here and you make it tighter. That's gonna keep your height of where you need it. So then you pull this piece up and your piece is totally where it needs to be. So then I'm gonna jump on here to my program. I have it in here, I have it 90 by 90. I need to move this little dot and put it directly in the center as well as I can. And then I'm gonna go to my machine and I'm gonna put the laser directly in the middle of my tile. So you can see there's little X in here and I'm gonna do my best to get that directly in the middle. And you can go back to the computer and push framing. And then it's gonna move the X tool. So that framing tool really comes in handy. And now if you're ready, you can hit start and this is gonna take 25 minutes to cut or to engrave. So we're gonna push start, we're gonna see what happens. Now you gotta put your glasses on. Yep, and it tells us that it's 24 minutes left. So I'm gonna put these silly looking glasses on. But it's very important to do this if you're going to be watching this, you do not wanna watch it with just your regular eyes. So the camera's, the man is not gonna look at it. But you can see how it's going back and forth. That is so cool. So this is just a slate tile that I'm actually using. And it goes, okay, so don't mind me with my funky glasses on, but we're in the garage. We have the door open and the X tool is going. I cannot wait to see how this turns out. So we've done a few already. This is one of the examples that we have. You can tell it's a little bit off, but we're still learning. But this program is really, really awesome. Another thing I wanted to talk about really quick is I do have a camera set up here, a time lapse camera. So it's pretty cool that you can see this. So I have this going on a two minute interval. So at the end, I'm gonna show you what the time lapse looks like. I'm really excited to see how this turns out. Hopefully this time we got it in the center. It's a little bit of a learning curve, but I'm really excited to try these out. The tiles are very inexpensive. I'll leave them in the description down below of where I purchased them from Amazon. All right, it's all done. This one seems to be a little bit better in center than our other ones that we did. I'm gonna leave a time lapse of what it looks like. So here it is, it is finished. I really love how this turned out. I love my X tool machine. I'm gonna be doing a lot more videos on this. If you like this video, hit that subscribe button and thumbs up. And I'm gonna leave a time lapse at the end of this video so you guys can see what it looks like. I think it's like 24 seconds or something, but it's really cool to see the time lapse of this creating it. So I'm definitely going to be doing a lot more of these. I'm gonna be creating some for the stores that I'm in as well. So stay tuned for that video. Stay tuned guys.