 Hey guys shave every 1000 here today. We've got this 12 volt fan We got to put an end on it and I'm gonna show you how to do that So stay tuned. Okay guys. I think I've got everything I need here I may have to do some soldering so I've got my soldering gun out or soldering iron Actually, I've got it out. I know I'm gonna need these and I'll probably need this Screwdriver now. Here's the cord. We're gonna put on now if you look at this It's the same cord now apparently I needed this for something temporary and I cut it off of there so Anyway, let's go ahead and Because I was looking for a cord to put on it and well I found that one And I kind of remember cutting it off, but I don't remember what for okay, so There's a couple Phillips head screws right in here there's your on and off switch and So we're gonna take these out first Set these over here So I can lose them. Like I said, I'm pretty sure I'll probably have to be soldering some wires on here Do I cut it off so close? Okay, I'll see This one goes right past all it is is a switch It's a bypassed switch So I'll solder that on and I'll cut this one right here See the one with the white one is the power So they got the power on switched so I'll cut this right here and I'll solder these together and tape them because I don't have any any heat shrink so let's go ahead and and You know, I might be able to just I Like the solder and both though all right So let's go ahead and I Can't get this deal off of here. I shouldn't run it all the way up in there, but I don't feel like taking that thing apart okay, so Let's Go ahead and cut this off here We'll make it a little longer All right, we'll solder these two together and Then I'll solder that piece back in there. I may just tie this into a knot there or put a wire tie on it So that way it'll be okay. All right, so first thing we're going to do is I'm going to strip these wires I'm going to strip. All right. Here we go. I know you guys don't want to see that All right So now what I'm going to have to do is I got to plug my soldering iron in and we'll let that get hot And I'll be right back with you okay, guys want to try to Try to do this Without either burning myself or screwing something up. So Clip some of this back here. I know I'm not close enough for you guys to see real well, and I'm sorry It's not really a how-to on how to solder. It's just how to fix this damn thing that For some reason I cut off. So so there's that one what I'm going to do is just kind of twist this together maybe I Get my Little fingers to work. Let's try to make this one a little bit longer Yeah, this is a it's a 12 volt osculating fan. So Pretty cool, and then we're going to try it out make sure it still works because it worked before I cut the cord off But uh So now we want to I want to get up underneath there Heat that wire up If my soldering iron will heat up hot enough Then I'm going to try to put it on the top here. I always have trouble with these things man. I can't I Can braze I can weld but man when it comes to soldering there we go There we go and down inside there All right, okay, so there's that now. Let me grab my tape here cut a little piece of this off first so we don't have the dirty end I'm on with all my paw prints on it like I said when I solder like this I I like to use the the heat shrink, but I Don't have any and every time I go get supplies for something Of course, you know I Forget to pick it up now what I'm going to do here is I'm just going to put a wire tie right on there instead of this piece So let me grab a wire tie Get this on here. Hopefully it'll go small enough. I don't know if I've got any smaller ones I think I do but I'm not positive So I hit the camera and that's just going to keep it from pulling out So I think that'll work. All right Clip that off just back in here right now Put our Our little dealio back on here back out a little bit just now start to get some rain I could have I went down set up down to end of the road to sell some stuff For a little bit There's an old guy down there that sells tools and stuff which I bought I bought a lot of stuff off other than a lot of tools or gadgets screwdrivers things of that nature and He's not he's only 17 minutes away from where we were at his wife and called him and said That it was pouring there and the rain was coming our way. Well, which it did sprinkle a little bit, but I'm just now getting some actual rain rain, but Okay, so there that is now. Let's take it out to her dad's truck And let's plug it in and see if it works. All right, so I just got it clipped on here We'll go ahead and unplug his foam charger. Go ahead and plug the fan in. There's a switch. Let's kick it on Now over here This is how Just flip that little switch there There's no higher or low. It's just it is what it is, but it blows up pretty good air Hey guys, so just uh, I guess how to put a cord on A fan. I don't know what to put that under. It's not home improvement. It's not really Tipping trick auto tips and tricks. I don't know Anyway, there it is How you put an end on a fan that I cut off so Have a great weekend guys appreciate it. Thanks for watching and Remember tomorrow night. I'm gonna shoot for around eight o'clock Seven or eight. I'm not sure but I'm gonna go over to the clubhouse there and spend the night in the clubhouse. So Again, thanks for watching guys. I appreciate it. Oh and tomorrow we're gonna do some live streaming During the day from the flea market. So that should be fun, too. So keep an eye out for that I'm not sure what time but I'll be filming that too. Some of you guys want to see that so Thanks for watching again guys appreciate it. Shea Bear the myth man legend. I'm gone for now. Have a great weekend. Bye. Bye You