 Hi and welcome to the session. Today I'll help you with the following question. The question says construct the following quadrilateral quadrilateral LIFT where LI is given to be 4 centimeters, IF equal to 3 centimeters, TL equal to 2.5 centimeters, LF equal to 4.5 centimeters and IT equal to 4 centimeters. Now before drawing the actual figure, first let's consider the rough sketch of the quadrilateral LIFT in which we have LI is given to be 4 centimeters, FI is 3 centimeters, TL is 2.5 centimeters, LF is 4.5 centimeters and TI is 4 centimeters. Now let's move on to the solution. Now we'll draw the actual figure step by step. Now our first step of construction here says, draw a line segment LI equal to 4 centimeters. So as you can see we have taken LI equal to 4 centimeters. In the next step we will locate the point F where FI would be 3 centimeters and LF would be 4.5 centimeters. So our next step of construction is with IASC center and radius 3 centimeters, draw an arc. So as we can see that with IASC center and radius 3 centimeters we have drawn an arc. Now our next step of construction is take LASC center and radius 4.5 centimeters, draw another arc intersecting the previous arc. So as you can observe the figure with LASC center and radius 4.5 centimeters we have drawn an arc intersecting the previous arc. Now we mark this point of intersection of the two arcs as F. So in the next step of construction we join the vertices L and F, F and I. So we have joined the vertices L and F and F and I where FI is 3 centimeters and LF is 4.5 centimeters. Now in the next step taking IASC center and radius 4 centimeters we draw an arc. So with IASC center and radius 4 centimeters we have drawn an arc here. Same way in the next step we take LASC center and radius 2.5 centimeters we draw another arc, arc drawn step 5. So as you can see in the figure with LASC center and radius 2.5 centimeters we have drawn an arc which is intersecting the previous arc. We mark this point of intersection of two arc as T. Now in the next step we join the vertices L and T and TNI. So we have joined L and T and TNI where LT is 2.5 centimeters and TI is 4 centimeters. Now finally we join the points T and F. So last step is join the points T and F to obtain the required quadrilateral LIFT. So we have joined the vertices T and F and we have got the quadrilateral LIFT. So we have LIFT is the required quadrilateral with LI equal to 4 centimeters, FI equal to 3 centimeters, LF equal to 4.5 centimeters, LT equal to 2.5 centimeters and IT equal to 4 centimeters. Hope you enjoyed the session. Have a good day.