 Hey everyone, Drew with GeoArm and I am back to talk to you about programming in the Geofob, the wireless four button key fob for the GeoAlarm system. Once again, this is another very, very easy sensor to enroll into this system. We're going to go ahead and start by hitting the hamburger icon up in the top left hand corner. Into your master passcode, mines one, two, three, four. At this point, you're going to go ahead and hit devices. You're going to press the plus sign up in the top right hand corner. Then you're going to choose the device that you're wanting to program. Here in this case, it's going to be the key fob. This is a very easy enrollment process. You're literally pressing any button that you'd like on here and holding it down for two seconds. Now the key fob has been enrolled into the system. At this point, you need to decide what user is going to be responsible for this key fob. If it's the master, then the primary owner of this system, that's their key fob. If you haven't added any additional users into your system yet, you can also add them from here so you can add this key fob as that user. In this case, I'm just going to select master. This key fob has now been assigned to the master. As you can see, the key fob is enrolled under groups here. Let's go ahead and go back and we'll give it a test. We'll arm it in stay mode. There's stay. Let's go ahead and we'll give it a disarm here. There's the disarm. Obviously, there's a panic button which is the red button. You press and hold that down. You will get a panic alarm. Then there's the away setting which allows you to arm the motion detectors and actually the entire system. Stay arms everything with the exception of interior follower and interior with delayed devices which are usually set up as motions. Ladies and gentlemen, that is how you enroll it. Let's go up into the menu again here and then we'll delete it. You jump back in there like we did before. Go to devices. You're going to choose your key fob. You can obviously toggle it on and off here if you want to plan on putting it back in at some point. I'm not going to put it back in. I'm just going to go ahead and delete it. So click delete and then delete again. That should remove the key fob from the system. As you can see, there's nothing left here. We'll hit the back arrow all the way back out to program to exit programming. That is how you enroll and program the wireless four button key fob for the geo alarm system as well as delete it. If you guys have any questions or any comments, please leave them below. Other than that, take care and have a great day. Please like and subscribe to our page for helpful programming and installation videos, product reviews, monitoring, products and more. Visit www.geoarm.com or call 877-443-6276 that's www.geoarm.com or 877-443-6276 geoarm, the worldwide leader in DIY security.