 One tier two tier red fish blue fish. We just made these cake stands. I used the glow forage for my design And I used a cricket stencil for mine, and we'll show you how we did it right now What is up a welcome back? Do you like to do a builder to make it? We do too, and we do a new video every Friday This week we're continuing our series with the farmers market We have a new product to test out on you guys and you can tell me what you think We're doing a cake tray. I'm doing a single-tier cake tray. Isn't that cool looking? I think it'll be good, but Garrett has taken it to a whole other level And I'm doing two tears. Yes, he did. He had to one up me and say wait I think we could do this here and he is going to Engrave his design using the glow forage and I am going to stencil my design Using a stencil I cut on the cricket step one. We're going to gather all of our supplies I just needed a 12-inch round and a 15-inch round And then a piece from my middle, which is like a sofa foot and Then some other little feet. I guess mine had a lot more pieces, too, right? It was these are little tiny candlesticks We found these at Hobby Lobby. Sorry. I opened it already little guys Gonna use miss feet and I am using a 15-inch round and This was San Dipidus break it you buy it kind of thing It is I was looking for something else and I picked this up in Michaels and I dropped it and it cracked and broke so I glued it back together and we're gonna use that for this project now. I won't sell it at the farmers market I'm just testing this out So don't wait think I'm gonna sell it like that But once I got it here. I thought what a great base for this cake tray. So that's what I'm gonna use for mine Step two Now we're gonna paint. I'm gonna lay down a base coat of this tin white It's like our go-to lately because we have so much of it and I'm gonna start with the base coat of this chalked up paint that we got from Monte Tay Inslate because I'm gonna do two layers of paint on mine for distressing not me. I'm just doing one layer One coat there one layer two tears Doing a lot of painting with this tin white We got these rounds at Lowe's yeah Had them as well as 15s 18s and did you see some of them like yeah, they're table size Yeah, that's what I was thinking too I was really surprised Step three Now we're gonna do our designs. I'm gonna mask mine off using this Giant masking tape And then I'm gonna take her into the blow forge Yes, it's just paper masking tape like you would see in a little roll, but in a big roll and this is optimal for the glow forge so that It doesn't leave burn marks on your project And then you just peel it up. It's also great for layered painting So you only peel up what you want to paint at that time That's a little tip we've learned and I'm going to cut out my design on the Cricut So I'm gonna go do that Here we just imported our SVG Sized it to the sides of our board here You can see that we're sizing it to 11.7 which is saying that we need a larger mat But we didn't really need it. We just used a 12 inch mat We selected vinyl and click the flashing go button We're using or mask 813 here and just use the same vinyl setting. I Imported the same image into the glow forge app I size the image to the bottom tier. I'm gonna save that be for later Then I selected what I thought was the closest material. I refocus that machine and Then I just hit print. I took the honeycomb out so the board was a little low So I put the top under the bottom and I gave it a try again. Now once that was done I had to rotate the board and Then I rotated the image. I removed what I already engraved and then I tried to tweak it a little bit to make it a little more centered Yeah, really now it's a little wonky Then I swapped the top in the bottom and I engraved the bee. I have my stencil all cut Now I'm just going to peel the backer off and apply it to my 15 inch round Thing about this stencil is one Because I can't get my nails done. I Have nothing to try and pull the backer off and then two I have a bunch of paint on my fingers I'm not sure this is gonna work. I might have to go get this paint off first Yep, I am still working on it. I know you're thinking to yourself. How is that possible? But I am Still trying to peel this back. Oh, I got it. I got it. I got it So we put our hands both of us did it now on now Over the detailed leaves and they stuck to our hands. So what a mess See it's kind of missing some pieces They're on my arm Doesn't always work out perfectly the first time cut it again. It's good again. All right, let's do it Mine's going swimmingly So I decided this time to go ahead and distress it before I stenciled it and you see that strip in there I don't know what that is. It would not distress out Finally got this stencil on Wow, it was a killer. It was a killer and mine is back from the glue forage I'm gonna remove all my masking tape. Yeah, he did nothing to stand around and watch it work I hope that I helped you out. You did a monster. You did help me I Think yeah, that thing is so tight. You'll get hurt So my Mod Podge is barely dry. I'm not gonna let it sit on here because I don't want it to Get too dry and pull up the stencil. So I'm gonna well, it's just barely dry. I'm gonna go ahead and start adding my paint If it gets too dry, it'll dry to the stencil and when you try to pull it up It'll rip the paint or it'll just pull all the paint up with it I have some yellowing and some sin marks From the smoke. So I'm just gonna use some alcohol and a little bit of paper towel Clean that right up. What's it gonna do the chalk paint? What's mine say? Now, what's mine say? Mine say dude What's mine say? against the green Paint barely dry Still looking a little shiny and some spots Kim's impatient Now we're gonna glue together with a little bit of this crazy a gorilla glue. Yes Garrett is still on his never-ending quest for the fastest glue Adhesion on the market. Yes Find it. I'll let you know he can't stand to wait for the glue to dry And so he brought me these two little test pieces and he said look I just glued it Can you even pull it apart? Can you even pull it apart? So we're gonna try the gorilla super glue on this project. So Take this little screw out of the bottom of my a sofa foot And then I'm gonna start gluing. You just really have to glue your cake piece on. Yes I have my little stand That's all I'm gonna do dryness. I enjoy dryness of the gorilla glue. I Also like my design. I think it looks a very crisp. So I'm not even gonna distress it just leaving it like it is You know the mistake on the bottom. I Like mine. I like this farmhouse look. I think it looks great I really was torn as to whether so I distressed it and then stenciled on top and I Was torn as to whether or not I should distress this paint here I think I'm gonna leave it as it is because I think the Color I've chosen for the words kind of matches the distress underneath. So I think it looks good. I'm just gonna leave it Yeah, I like it. We just got to find a way to a mass produce those for the This was a little easier to mass produce That was a little more Yeah, what do you think? What do you think about our additions to the farmers market? Which one should we bring one or both would you buy a cake stand at a farmers market? It's just a thought tell me what you think. Yeah, let us know Looks like we're bad out of time. I gotta go make some dinner So we'll see you next week where we'll do it build it and make it again. He's drying up the balance. Yeah, no, I can't do it I mean, I guess I could to do it, but Practices Garrett. No, I did I can flip it and catch it the glue is that dry already? Is my stand pretty good?