 Hi guys, hope you all had a great Christmas, New Year, Holidays, however you celebrate or don't. Now this is a quick video regarding over-the-air updates and how much simpler can this be getting these days. We've got the quad that we're going to be using to just do the update. We've got a little TBS Nano receiver here and tiny little thing that connects to this antenna. And so we're going to be first of all updating this. And then this is the module that goes into a back of a radio. This is a, I think it's called a JR module. It's a made in China thingy, but never mind this is very good. And this is, I'll tell you what, you know, I really do like this. This is not a review. This is not at anything. This is just over-the-air how great this is getting and how this is a gift that just keeps giving or not a gift. I had to go and buy it. But look, I've found out that there's a Wi-Fi module that goes into here, a Bluetooth module. And I can have it connect to my devices via Wi-Fi or Bluetooth. It uses a Mavelink protocol, which means that you can do other things with it, like for ground control stations. So it is, it is one of these ones that carries on. Given that this is a few years old and I've been thrilled with it since I bought it and I'm still thrilled at it today. And I just want to show you how easy it is to do the over-the-air updates and how easy it is to update one of these. So let me just plug this in here. And as you can see, it shows you the state of that. If I can just put that down here and look across the computer, we can already see, let me just click onto my devices there. And you can see there's my little indicator there because we're connected. And it's, there's the Wi-Fi part of this. And I've also got a diversity receiver and a micro receiver. This is going to be connected to the nano receiver. Right, so it's going into the transmitter, crossfire transmitter. That's the XF crossfire transmitter. And we can look in the firmware and we can look and we can see the current firmware is 610. There's an update. It's a beta version, but that doesn't really matter with TBS. It's going to all be good. Now there's a release note here, so we get to see what it is that's been updated. Let's have a look. Look, we got added Baro sensor support. Right from the top, you may have to run the update twice, one times update, one times refresh, as all update protocols have to be revised and improved. Okay, replaces 612 and 610. Added Baro sensor, that's barometer. Fixed update issues with Agent X for full size, TX, TX Lite and TX, micro TX. Fixed bug in tango, fixed backward compatibility, eProm.bin. Resilient OTA over the A updates with improved security. Restored PWN channel maps due to popular demand. Good, because I got the diversity received. That's got PWN channels on that, I still want to use. Faster binding after over-the-air update, improved reliability of SD card on tango 2 and mumbo. Add idle up to gimbal bypass mode for kiss users. Fixed mavelink version 1 issue in 610. Fixed bind issue after OTA update. Did he know? Mirror fixed for double pop-up during OTA. Miner, sorry, not mirror, minor. Miner, new LED blinking patterns for OTA. Miner, ask users to reload firmware in Agent M. That's TBS agent software on your phone, mobile, Agent M. I'm using Agent X, which is, I think that's a dodgy old virus or something from years and years ago. But it's not actually, it's TBS Agent X and that's what's in my laptop at the moment. So we got this, yeah, Agent X, not Agent X. Miner, tracer link stats fixer, beta flight OSD. Miner, multiple child firmwares in the SD cards. Really? Miner, violet LED color on tango 2 for validation firmware. Multiple child firmwares in the SD cards. Miner, more responsive RGB LED fixer tango 2 member random PPM pulse before start-up. I do believe there's no more PPM on these now. But anyway, so let's just close that then and go ahead and do this update. And I'm just going to click that to there. So there we can go, we can see with vice update 16.13. And I'm just going to click on the update here and let it go ahead. Now, as you can see when it starts doing its updating, would that be better? Nah, I don't think it really. I can just go in like that. So it's just basically saying it's updating the firmware. Off it goes. This is fantastic. Now did it say, it said do it twice, didn't it? So I'll do it again. Once this is happy, it's done. It's updating subsystems and verifying. Okay, it's just doing the verifying. 100%. But I'll wait until that says... Oh, I wonder if it's actually doing it again. Or it's updating the different subsystems. It says there. It says there. I'll just go in the back of my radio instead of using 2.4 gigs. I just wanted to use a lower frequency for that extra bit of range, you know. Got the same sort of power. All right, so that's it. We're complete. Now what I can do is I can take this out of here. I can just go backwards for a second while we've got it in here. And just go back into devices. And now I can see that the TBS crossfire is on 613. And these are on lower firmware settings. But the one that's in here... Let me just come back here again. The one that's in here, the firmware that's on here. I'm just going to take that out now. Is... Now again, I can't remember what it is on there. It could be, I think it's 610. It's got to be 610, I'm pretty sure it is. So I'm just going to put this back into the back of my radio. Easy, that is. But that's it, it's in now. What I'm going to do now is I'm just going to turn this on. The security on the card, whatever. Right. So now you can see there that we're just in this mode to go. And I'm just going to check my power here. And power cables. Now. That's good, but nothing ever fits. Let me just put this on here like this. And I have to put the fan on this. Because even though it's on 25 milliwatts and... I sort of can feel it's going to pit-nade, but for some reason it's just not doing it. But never mind, it doesn't matter. So now what I'm going to do... I just want it to be in... So now I'm just going to power this on. I'm just going to power this on now. I can just go into this now. So we've got the transmitter here, devices. Because it can't see the other one. Right. Team-raising, video transmitter, tracker, Bluetooth, Wi-Fi, radio settings. So there's some more... There's some more settings there that I've not even looked through yet. So we're just going to click on where it says bind. It's going to click that. And then it will do it automatically. There we go. Update the NanoRX. That's what it says on there. So I'm just going to say yes. Click on that. Just put that a little bit further distance away. It's just because I don't like them being so close together. Probably pull that a bit further down there. But I don't want to mess around any cables. 30% of the update done. Do you know with the FrSky stuff? Sometimes that could be a pain in the backside doing updates. And I know everything is changing. Of course, you know, maybe they're all doing that as well. But my interest was when I first got into it, I just wanted to buy a few bits of kit that were going to work last and be good. And I think I did quite well with this Taranis radio. Even though, you know, they've been superseded now by colored screens and touchscreen even. But still, this TBS module that plugs in the back is just fantastic. Absolutely love it. Right, now it's doing the RX. It's loading. Do not interrupt. Flashing away on there. And now we're going for the bind process. And now just give it a few seconds. We're bound. There we go. We have now just done the update of this module on the back and this module can connect. It's got all the firmware in it for all the other receivers as well. So the receiver's already on something. All you've got to do is put this into the bind mode. Power up the receiver and bang, it starts binding. It will do that process for you. Fantastic. Over-the-air updates. Brilliant. Thanks to whoever thought of it. And you know, as far as I remember, TBS, I think one of the first ones, but there are going to be other systems out there I'm sure. Absolutely fantastic. Thank you guys. If you've watched this far, I'll speak to you in the next one. Bye-bye.