 it seems to be at the moment whenever I get a break rain rain go away okay so we have now got the quad just going to plug that in very quickly in there we don't have any props on it which is always good for the base thing be wrong sometimes you're gonna see me I've got props on sometimes you know I don't but generally as a rule you don't want to have the props on the bench because if it does spin up it does something you know unexpected you can have problems so I'm just gonna plug this in first anyway so I've got one connected on my radio just so we've got to receive the connected as well so now I'm just gonna take that out into this and what you'll see now up on the screen there is COM port 6 is now available so there we go and I'm just gonna quickly go through the the settings on this now when I upgraded I used the CLI and in the CLI before you upgrade you can do this thing called diff all yes very small it doesn't really matter up case low case it gets case sensitive we're gonna find out now so all of that's in lower case it doesn't matter see if we do a diff all and what comes up then is all of the settings I have I start from the top all the settings I have which are different to the preset settings okay so I'm just gonna pull down this slowly make sure when I look through it and pause it anywhere there we go all done now when we leave this and I want to go into like setup or something it will reboot restart the system it would be great to get out you can get out and have a little flights but unfortunately the weather has not been with me whenever I've had any time to do that the weather has been absolutely against me and it's been really really annoying but let's have a little look going so the first page look you're gonna get is a setup page you get to see a quad it's a move around if I just moved up to the front and there's a reset axis on this and there we go so I can go left right forward go back upside down all this sort of stuff now the reason why it knows how to go left right upside down the same as what's on there is because of this this next little part here and just a quick if you look down the side I'm not gonna go for every single thing you get to see what's there okay so let's go into calibration and here is where we set up in order to get that you know when we when we go left it goes left I mean dive forward you know it does what we want it to do it's in reading from the same page as it were and this is all you're gonna do so basically you sit on the bench where it's nice and level and you you just go through this calibration okay and it will click up here to calibrate the next one calibrating the next one calibrating and you just keep doing this and you got it all there there may be some fine tuning that you want to do but you can do that outside of the craft you can do that with your sticks that's another video and then you've got your mixer and you want to set up generally for the sort of thing multi rotor quad X load and apply and then leave it right you can save them a bit if you want I tend to do that quite a lot the outputs you're not really going to touch these anyway you might enable the motors server outputs you can switch them on and off I've got my ESC's multi-shot the rest of it pretty much feels itself in I'm gonna show you something here because I think it's worth sharing is you do want your motors nicely calibrated see that one little difference there okay so none of them are going and they all are and that's a that's how you want it really and that will all go in the right direction of course that's always a that's always a good thing so you know when you calibrate is what ESC is a calibrated up together but that's another video again so in now in here see make sure you make sure the mixer is configured before you apply a preset right so I've not applied a preset on my I've not applied a preset I've got funny feeling they should go with something like this six inch 20 207 1700 kv motors because monster six inch quad it's running 20 or six and a 17 20 kv motors so that would be pretty much the idea one so I'm gonna actually click on that because I've not done this yet all that applies the following settings these shots 600 2k might improve mechanics optimize filter and optimize rates problem there is these shots yeah these shots 600 mine are pretty sure a set up to a monster shot now I don't know whether this I like it whether this does that or not for me I'm not gonna say that I think it would do so I'm just gonna leave it for now ports are important now you will get around to looking at pretty soon generally you know you can use port to receive and even use experts you know if you're using a fast or something like that I'm using your art 3 my serial receive and trans got the data because it just uses the the one port the one you are and use the transmit the data on that but tbs crossfire and then I'm using their smart audio for my my port for okay configuration yeah we got some good good greens on in here not gonna go through the whole lot but this is suggested for all multi-boots and pellets size below 18 just so they basically fill this in for you I don't have a micrometer or a barometer and have any of these things here so all this is set at nine it automatically finds your accelerometer I've left my roll degrees and everything just just the way it comes at the moment not gonna pay on any that's all I think band fat shot power level two I'm not even sure that's working on mine it's power level two of mine would actually be 200 milliwatts but I don't want it coming 200 milliwatts I prefer it just to come on at 25 milliwatts so I can sit with it on the bench money to on the right hand side got the voltage battery voltage now none of these you should really want to adjust on need to I mean you may find that you do have to and the same on the current but look just because it doesn't say you can put a meter on if you'd like and you can run from a power supply you put a meter on and you could work out hey right down the bottom and it's it's displaying too much current yeah because your meter is telling you one thing and its sensor is telling you another and then as you start increasing the throttle you may find they start marrying up a little bit closer or even going out of line the other way so I would just leave it I don't think it's supposed to be an exact precision thing I think it's supposed to be a general all-rounder type thing on that your other features here this interesting so you can stop the motors on low-throttle some say do this some say don't do it this is going to be something that you've got the option to play around with these options are great it's something you never or at least I never was able to have with the Hobson and it was one of the most frustrating things to always be flying in altitude hold if you couldn't manage that center self-centering sticking in manual because it's an absolute nightmare as you'll find on any of the other radios that you might buy to do this there's no self-centering stick on the throttle anyway so you got your telemetry output of course we want that we want enable motor and serve up well don't certainly want the motors CPU better back by spine on screen display yes and profile selection stick I suppose I could start getting used to doing that links on the left stick it's bottom left and on the right stick then it would just be left profile one same thing left stiff and then up profile anyway so yeah that's it that's pretty much easy no if you did have GPS using new blocks that's why I tend to use then you just turn the GPS on your file so of course that's always important I've got mine down to land which is somewhere where I never liked being the idea is you know if you do run into problems like you run out radio it will just land somewhere which is all well and good if you know where it is so it's always nice to have the GPS to have the return to home facility as the last thing but if you can just be flying you know close to you and you cut yourself a year and your ESC will chime after 10 minutes on this set up 10 minutes and also you can have your lost model along wrong radio which will beep your beeper so as you get close to where you think it is you can always you always find it's not too bad now the picture on this I haven't touched yet and as you can see there are some numbers here which means even if you don't select one of these presets up here even if you don't select that but it's still got it's still got it's got some numbers in there if you're choosing proportionate integral and derivative PIDs that's all another video right let's look into so you're not going to use a lot of this not let's use a fixed wing you may want to control your speed rates as you come in as you come down navigation climb cruise speeds navigation speeds user control mode hover throttle so you can adjust your hover throttle now these are the sort of things you want to play around with a little bit because it's every build is slightly different you can imagine that a different battery make this lighter every build is different so that not one glove is going to fit it's going to be everything you're going to do is going to be based around and then you're going to just fine-tune for yourself don't ever expect to get perfect PIDs or anything like that from what I can tell I don't think there's any such thing I mean you get as close to what you can within your own parameters you know of what you find except for what you're happy with you don't find except what you keep playing keep playing just remember this leg you adjust P it's going to adjust the other two on your exhaust light and it's always going to be like that until you just get it home then it's way happy with it yeah see here you can adjust your return time setting so you can say it's at least a certain altitude you can have it so it's so the current altitude extra fixed max or at least at least a linear descent okay so go up to at least a certain altitude and coming for a linear descent so it's just on its way down that will be nice when it as long as there's nothing in the way so I tend to leave mine on like current but as I haven't got a GPS on this it's not going to work anyway you can even tell it to come in towel first lots of stuff if you put the GPS on and I've got a funny thing I am going to change this one up to the GPS but I really prefer to have the female arms on because it compensates for the weight of the GPS module because they you know they're coming quite heavy I'm not quite sure what this is but they're not exactly light but that's where that would sit and then we go to the GPS but that board in there doesn't work with the GPS yeah so you've got all sorts of bits and pieces down here landing speeds vertical landing speeds all the right stuff is for platform near position estimator wouldn't play around with that it's all fixed there's multi-roader braking mode or there's something I don't use okay that's for you guys there near I'm not sure about any that I wouldn't touch anything because most of these things are pretty much set up just the way you want them programming I don't touch any of that don't really need it no idea what to do in this but never needed to use it I'm sure there's plenty of plenty of things to use it with for I've always been curious why Channel 17 shows this up it's not my analysis I did that's on channel 12 here but it doesn't seem to affect anything let me just I could probably do it turning that down that looks like it's about it too high 10 10 oh there we go just a minute you want to be a thousand to two thousand fifteen hundred central I love noise on the stick now the modes now the modes are pretty self-sufficient so you're gonna have it channel five for our visa one two three four channels for motors one two three four the next channel we're gonna use will be channel five so channel five we can use the arm channel six we can choose between our flight modes we got angle horizon and the default when neither of these two is set anything at a minute it's in horizon the default is then to go to acro mode mine when it's in acro mode with neither of these set and goes into air mode and then I can pull out of air mode into horizon when I come into land just to make the landings a lot simpler but have you know but have the front of the pin still being used at low throttle in air mode is beneficial beneficial there's my beeper so I put on the next channel channel seven to make sure that I get that last model alarm if you're liking that's it that's all I'm using I've not even got any switches for the ASTs or anything like that oh there we go okay so our adjustments again nothing in there don't need to use it everything got round to looking at it I'm sure at this minute in time just for doing a bit of flying around and making sure it was okay I don't really need that we don't have a GPS on so we're not going to do any of the GPS stuff certainly not going to use mission control or anything like that and do anything you know pretty but we can't do anything like that we've got the OS on-screen display and I'm sure a lot of you guys there you know you're gonna love playing around mission control anyway because you like your map you can just map it out you set your first you want to go you know there's lots of settings in here as well so there's a way point and then you can turn the speed it goes from one place to the other here one six six six centimeters a second so that makes it like one half meters a second I'm not sure that's gonna be fast and to be honest 75 meters high and doing this but this is all the sort of stuff you got play around but I wouldn't just I wouldn't I wouldn't just put something in chuck it put it up in there until it's a good point mission I'd really study up on on your speeds and make sure you know that you're gonna be getting at least I don't know what you want to go for 40k something like 45 50k to make sure you get that right about 70 meters a second so right in the on-screen display we can decide what we want to turn I'm gonna turn off there's a whole bunch of stuff in here I could do with not moving wrong my system around a little bit but I just kind of bother playing around at the moment if you want to quick a switch time between things video formats if you know what you're gonna be on switch it to that having it on auto just it will take the system a little bit of time to figure out which is which and I'm talking a fraction of a second but if you just want to do automatically to power automatic the NTC so you got a lot of stuff here for temperature there's a lot of stuff that may not be actually what you can use with your flight controller at this moment in time but it's there's a lot of stuff there to play with a lot of stuff to keep your music we play around of course you got your LED strips as well so you can put LEDs on your craft and then you can map them out here so you want to fall in front one two three four you want to enter white that's simple enough just mark out the ones that you want tell it to be a color and then you can give it a nice white color do the same on the back there is it's one of those things with this it's easy to do once you've just got the little swing about to do it okay it's easy to do once you just have a little play around a little practice you can really go over the board if you want it when you can go for modes orientation arm state battery RSGPS ring and you can have warnings and indicators and all sorts but I would just get used to maybe if you are going to do this just like the front top like the back end up enjoy it and then start with all this different orientation but it's all there it's all there senses okay so that's what we've gone on at the moment I said the top one is our gyroscope now we got our accelerometer and we got our barometer which of course this doesn't have so it's not telling me anything on the barometer all these things at tethered lugging yeah I don't use any of that black box we've got a we can put an SD card in this for a black box but to be honest with you just really not needed right it's minute in time and back to the CLI well that's it that's the quick little run-through I now just so you get a little bit of a look at what's what with some basic settings in not a great deal to change honestly there isn't even though all those settings I showed you in the CLI they're just what you get round to you know not a great deal to change so there's a very quick look into the I now set up for this particular quad and I've got a funny thing I'm going to strip this anyway and put this other board on it so we've got a little bit of a little bit of GPS and we'll have a little bit of fun with that showing you some way points and bits and pieces I'll be in the next video right guys if you got this far that's great thank you very much and I hope INAP doesn't look like it's such a big overwhelming thing because it's not missing great fantastic help out there as well but it is it is if you want to use a GPS you want to do waypoints if you want to do anything like that this would be the one to get used to INAP get used to INAP enjoy INAP and you know just yeah just and just enjoy that flying sensation right catching next one guys take care everybody stay healthy and see you soon