 Okay now I'm kitted up with a nice herbal tea. We've got our analogue discovery too here. The wave generator is coming around onto the inputs here and the scope is coming around here to the output speaker and the connections to the dummy load there. Right, all I've got to do now is get that on the go in the background. It's just a screen recorder. Put the power down and we've got a range 20, 20 kHz bandwidth. We're going to go on the 1.3 VRMS ATOM loads. Channel 1, THD and noise and let's run it. I think what's happened is I just moved the connection. I think we may have crashed the measurement. Let's just get that on the go. Run that again. Okay, that's what it shows as the THD and the noise. I'm going to get a lot of the 20Hz round-ish. 0.08, let's take the medium there. 40Hz, 0.07, 100Hz. 0.07 going all the way through. Peak here, around about 900Hz, 0.09, 0.06, 10K and 0.07 at 17.3. That's the THD and noise. We just dropped the noise out of that and look down at that. That's much more respectable. 0.05, 25Hz, 0.04, 50Hz, 0.04, 100Hz, 0.04, 253Hz, 0.04, 781Hz. 0.04, 82KHz. That's pretty good. We can look at the second harmonic plot and see how that's at. That's 0.02, 0.03, 0.03, 0.03, we've got a 0.01 there and all the way up to 0.04 it's measuring. Third harmonic, pretty much the same sort of thing again. 0.02, 0.01, 0.02. This is 0.02, 0.01, 0.01, 0.01. Alright, pretty good. We'll look at the frequency response when it says on here. Single channel, range steps, that'll do. Place three, we'll have the top as 3 dB and the bottom as 3 dB. Alright, so let's do that again. Now the noise level on this doesn't measure as low as it does using Arthur and my sound card. Oh, that's strange, can't see it. Wow, okay. Yeah, that's pretty cool. So I think what we did there was we blew it, blew it to pieces. And what went wrong there? I think I see the mistake. See the mistake, mistakes up here should have been 0.3, 0.3. Because we can't run it again like that because we're breaking it. That's completely popped it. But that's fine, it has to be with another one. Because I like this amp, darn it. Yeah, that's very hot. Yeah, that's very hot. Alright, so we'll stop that there then. Do some damage control.