 And another one. What's up people? Manuat here coming to you with a video. This time we are going to be unboxing and reviewing a USB condenser microphone. It is AU PM422. This is the serial number. These are the device specification. These are the frequency information and it uses USB and these are the features of the device. This is the support information for the device and this is the company's website. The product came in this box itself. The label was printed right on top. So I had to remove that so that's the reason why there is a little bit of blemish over here. Let's start with the unboxing experience. Right of the bat a pretty happy logo and also a frowny face if you need help. And this is the information for the website. We also have user manual and how to set that up. The mic cover so it can negate the sound that might be coming in or distortions that might be coming in. The technical terminology of this is a windscreen cap. So this is the cap for your microphone. This is a pop filter. It's a cloth mesh kind of a thing with a pretty snazzy looking logo. Not too bright so it's not going to distract you. And this is all metallic construction. So once you set it into place it is not going to go anywhere. Pretty strong, pretty well made and even the assembly knob thing they are also metallic. This is plastic board. This is plastic. But this is a metallic piece that is connected as a pretty heavy sturdy device. Let's continue. This is the base assembly for the mic and to minimize vibrations there are springs so the mic will just get tethered, screwed in over here and it does rotate. This is the adjustable thing. So you can tighten it, loosen it, get the mic to your liking and then tighten it. So it's actually going to be sturdy. Hey, the Gurukul silicone pack. Get enough of these. The base stand for your mic and again very solid construction. And as far as the depth is concerned about three fingers wide. So if your workstation or if your bench is about three fingers it will just clamp right in. And this is the other part that it houses onto. Pretty sturdy, metallic, all metal construction. A USB cable and it is a pretty heavy duty USB cable. And it's almost seven foot USB cable. So pretty long USB cable. It is pretty well made. It's about seven foot cable. So it will definitely connect properly and it's pretty heavy duty. So it will take care of any electrostatic interference that might be taking place. It's a Velcro strip thing. That way you can and that also has the company brand, the logo on it. And it's two of them. So you just don't get one, you get two of them. So that should allow for a better cable management experience. And the arm assembly. Pretty nice metallic. And it is pretty nice and metallic. Nice connectors. And it is QC passed. Springs are pretty tense. So pretty nice quality spring. And you do have adjustable options here. So you can tighten it, loosen it at multiple spots. So you can tighten it, loosen it once you get it to your preference. And finally the cream of the crop. The mic. It has the volume function and it does have the headset option. So you can plug in your headset into this. That way your headsets are not connected to your computer. You don't have extra cable going in. You can have your headset plugged into the mic itself and the mic can act like a mic. So this is everything that is included with your mic. It's a great value for the money that you're paying. Because you're not only getting the mic, you're also getting the stand. You're also getting all the accessories that you need to complete your gaming rig setup. I am going to be connecting it. I am going to be testing it. And this is the audio that you're listening to. Once I assemble this, I'm going to connect this to my PC. And you can hear the mic audio and you can determine for yourself how great the sound is. So now without further ado, let's proceed with the installation. So first things first, we need to connect the copper connector part which is this thing to the base of the mic. So we need to connect the microphone stand to the shock mount. That is the technical term. So we need to connect the microphone stand to the shock mount first. Pretty simple operation. You take the shock mount which is this and connect it to the mic. And keep on rotating it. It'll start tightening up. And once it's fixed in place, it will still rotate. That way you're able to rotate the mic. So now that this is done with the spring side up, we need to now connect the mic to the shock mount. So hold this steady and just straddle it through. Pretty snug fit. Now we need to connect the pop filter to the base of the microphone. So open this up and connect it. The pop filter is connected. Now for extra noise dampening, we are going to also connect the windscreen cap while you do have the pop card. If you have a fan running, this is going to prevent any extra noise from coming in. And now the base of the microphone stand is just going to get connected right here. Temporarily I'm going to just secure it on this table. And the installation of this is fairly easy. Just mount it flush. It should be completely perpendicular like so. So that should be a 90 degree connect. And hand tighten it. That way it doesn't move. Now we pick up our assembly and just drop it in here. And this is flush now. And we hand tighten it. Now we have moved the arm back and we are tightening this. We have oriented the mic right side up. And now we are going to adjust it and tighten that up. The screen filter thing is also adjustable. So you can mount it anywhere you want. Tighten the screen filter and I've tightened the arm. Now we have the noise gate in front of it. Now we need to connect the USB to the bottom of the microphone. Just rotate it left and connect it. Snug fit. Take the wire. I'm just going to braid it like this. Take the velcro straps. And keep in mind there are two of them. Feed it through. Make sure it's not pinching in between the arms. So when you're moving it, it doesn't get damaged. And take it and just plug it in here. And you still have a good four feet of cable. So you can connect it to your audio equipment. And it's a USB connector. This my friend is the final view that you will have. I personally feel this is a great microphone for live streaming, podcasting, video recording and any to all of your video production needs. Based on the specifications that are listed on the manual, this mic is definitely going to make a great addition to my streaming setup. And it's going to take my podcasting, my streaming. This is a test of the mic. As you can see it is coming in pretty clear. Thank you. And my video production to the next level. Definitely a big thumbs up for me. Thank you so much for watching. And I will see you guys and girls in the next video. Take care people. Bye.