 Hey everyone, Drew with GeoArmen. I am back to talk to you about the Honeywell Home Pro Series, Pro A7, and Pro A7 Plus Panels, and the enrollment of the Pro Series Pro 6PIR Motion Detector. Now this is a pretty simple one. Most of the time when you're doing this, there's going to be a battery tag that you pop. I'm going to do this as if you have already done that and you need to enroll it from scratch. What we're going to do first is go ahead and let you know that this does need a firmware update prior to doing anything on this. You cannot program this panel locally for sensors at least until you have had the firmware update done on this Pro Series panel. So give us a call, we can get it activated, we can get the firmware update done for you, and then you'll be able to do this. For those of you that have had the firmware update done and you're ready to do this, we'll go ahead and proceed. So what we're going to do first is we're going to hit the menu key. We're going to scroll down to where it says tools. At this point, we're going to enter our installer code, which is 4112 if it's still factory like mine is. Otherwise, go ahead and enter your installer code. Go ahead and go into the programming menu. You'll see a new list pop up. We're going to go into peripherals. And once in peripherals, you'll typically have a list of all your zones in here and what you have. I don't have anything. This is a fresh panel. So what I'm going to do is I'm going to go ahead and hit the plus sign up there at the top. And what we're going to need to do is pop the cover off of this motion detector, which you do by pressing down on this little spot here. And then just lifting up from the other side like so. Boom. So we'll do it again one more time here so you guys can see it. Press down, push up. Okay. As you can see here, the green light was flashing quickly and it's going to keep flashing and then eventually go solid for a moment and it will learn into the panel. So you should see this here momentarily. There we go. Our motion is now learned in. You can put your back plate back on. Also inside of the back plate, you can see the two screws that are used for mounting. So they are there. So we'll go ahead and we'll put this back here together now. Alright. Now what we're going to do is we're going to go ahead and program the motion detector. So go ahead and scroll down. You can see the different listings of things that are here. You can change the partition on it. The zone number. My zone number will be one. It is a motion sensor. We'll go ahead and we'll program in the zone description. So we'll put front for the motion type and then save. Go ahead and scroll down after you've done that. And we do want it supervised. We do want the alarm to report. And for the response type, interior follower interior with delay is typically what you want to set it if you're trying to be able to move around your house when you have it arm stay. If you want the motion to be active at all times, then you will not at all times, but whenever it's armed, I'm sorry, then you want to set it as a perimeter. And that means that the motion will become active, whether it stay or away modes. So we keep scrolling down here. The chime is disabled because we don't want it to chime every time you walk by it. The arm night is off and the pet immunity is on, which means that if you have a dog, it can walk around and it won't trigger this motion. At this point, we'll go ahead and we'll hit save because I don't want to add another one. You'll see the sensor here. We'll go ahead and hit the back arrow all the way out of programming. So I'm not programming anything else. And the way I would typically test this is arm it and then give it a shot. But as you can see, it is programmed in any time that I wave my hand in front of it. It's giving us a trouble condition and then it goes away when I stop. So this thing is programmed in. It's ready for use. So now you would get it mounted. If you guys have any questions or any comments, please leave them below. Other than that, this is how you program in the pro six PIR motion detector into the Honeywell home pro series pro a seven and pro a seven plus panels. You guys take care and have a great day. Make sure to subscribe to our YouTube page and click the show more tab underneath the video where you can view valuable links pertaining to this product. Similar how to videos and our low cost, no contract or monitoring services.