 From the vault yeah, so let's first start with a video that has something to do with these glasses Because I think that's the easiest thing to do and you can get an idea of what we were doing earlier in the week All right, lady. What is this? This is my desk full of rainbows. I'm doing two things here One is maybe a little demo here for the LED glasses so you can see tech scrolling and then also the LED rings Glowing so that's some Arduino test code working out here, and then over here I've got my new seesaw dev board based on the ATtiny 817 So this is connected to a metro mini over i-squared C So this is the controller and this is sending neopixel commands over i-squared C to here And now I got a ring here just to demo it and then I got on the oscilloscope checking out the signals Making sure they're nice and clean looking good So this is going to be the replacement for the Samdi 09 chipset Really hard to get that chip, but this one is a little bit more available less expensive and also three or five volt capable So all together kind of a nice little upgrade to our seesaw designs Okay, and you have some breakouts. Okay, this one. This is a fortune. Sorry eight channel ADC that runs over i-squared C so I'm making a semi-qt break out for it Except I'm also again redesigning the CP 2104 USB serial adapter board to the CP 2102 I was playing usb-c while we're at it This is a kind of a new sensor from ST It's a like eight by eight multi-zone time of flight sensor that VL 53l 5cx so middle break out That's not secret. Yeah, coming soon. Yeah, all right