Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Aug 21, 2010
2 trucks same setup: ESC shut down when steering but only when using 11.1v. 7.4v does NOT shut it down. Ive had the esc lose power so badly the green light even turns off. The 2075 servo is getting hot too but only when running 11.1v. It will shut off w/o the fans pugged in as well so its not the fan. It will shut down w/o even driving either truck, cold motor plug in a pack, set it on a table, steer it a bit, bam shuts down, no throttle input whatsoever. Maybe the bec on the esc doesnt provide enough voltage on 11.1v?? Both trucks have the identical problem.