 as soon as the installation comes we'll get it in and get the other viscune over the top. So dad's testing out our, oh wow. Brian if you're seeing this thanks let me borrow your rattler every time you need to do this. I know what I'm doing now as well. Jesus we're having some rain. We've just got out of the van now waiting for the installation to arrive it's 20 to 10 sorry 20 to 11 23rd of November. I think guys in the galaxy is out today Christmas special anyway we've just got out of the van come round here luckily you'll be able to see our evolution of centres of wet drive vac so that's going to help us here. This is our bottom layer of viscune so we need to get all this water out ready for the installation wash his face. Al good you've got an evolution wet drive vac isn't it. Link in the description if you want to buy some evolution gear. Hit five percent off code bricklaying in capitals. Anyway yeah that's what we're up to now going to start loading out get some blocks loaded out ready to start and as soon as the installation comes we'll get it in and get the other viscune over the top so we've picked a new roll up because that's all we've got left of that roll because it's good because you can do it in one piece which is handy so let's get into it there we have it that is all we can do for now for loading means we'll get this section so that section's loaded this section's loaded it's about three and a half block return each side and then the rest of its door big door that's what that big steel's for so that's loaded this is all loaded we stack them in threes because they're a bit damp because they're seven newton concretes we need them dry so we've loaded enough for seven course there which will take us up to scaffold height which is up here seven course it's going to be a stretch but yeah that side's got to be done overhand because the the the board is just too high and out of level so it's easy to do that once the slab's in so that is it for now we're going to have a quick dinner because it's 12 o'clock then we've got things like the damp course to put in walls to mark up i think or they're already marked up yeah starter wall starters to put up both sides no choosing because it's block and we're going to use these screw ties on the inside starter packs on the outside what else can we do oh yeah we're going to work out work work our bond out and i'm going to do a load of cuts with the with the evolution so get them all cut ready so it's just profile up line up and get it up so see you after lunch so where dad's testing out our oh wow our newest toy that we got from evolution do you want to give a quick word as to what it is even though it was pretty obvious wet drive back cordless because i think i think the charger came with it so it's wet and dry you just change the filter it's just like a mesh filter this one we've also got the other filter for dust obviously and it also has a blow function so you can switch that to the end and blow things with it obviously blow your dust away it's great for this but the volume of water we've got in there we need to spade into buckets first and this like get the last little bit but it did pick up pretty quick but i think the amount of water that's in there if you show them the battery's not going to last long doing that so so reckon we'll brush it to one end scoop it into a bucket and then get the last little bit with that over and out you can't drop this mic so it's just sitting on time laps i'm doing a bit of improvisation here when you watch you when you watch the joinery channel on youtube i'm using this piece of mdf as a fence for the saw so it's worked out it's 234 to allow for the saw and it's our cut edge made up with that look at that and that's cut down to exactly 200 100 slab 100 insulation we're going to put that in behind the silatex so we have made up that bit of um bit of youtube watching a bit of improvisation does the trick so i'll um i'll put the microphone away and i'll do the next one and just film it all at once so here we go 234 vouchers a bit worried this wouldn't work yeah alex is a bit skeptical this wouldn't work and it does perfectly and we haven't got much waste here we've only got a couple of hundred mil overlap cut this into six that means you've got um 2.4 times 6 is 12 12 about 14.4 linear meters and our floor is roughly 14 point something linear meters so we've got to be careful with it so they're really beautiful they're two cut edges then made up with that and 200 mil bang on so let's get the other four cut action if you remember we were doing these at A&E so brian if you're seeing this thing so let me borrow your rattler every time we need to do this so i'm doing now as well i'll put one in the center and not drill the top one so you can overlap yeah whether you could drill it but just don't put the thing in it that's right in the bed that's fine as long as you're going in vertical that's it yeah you've got ear protection i know you're using the eight yeah 10 right oh is it 10 yeah oh yeah i double checked beautiful nice one if you're just removing the ear yep but you've just done to the coal bridging strip what sorry but you've just done to the coal bridging strip oh shit that's a blooper right market calendars thursday 24th november 2022 this bloody concrete finally came in oh it's been a long time coming with a mix of this bloody weather the waiting for the insulation just the dig went the dig went that well that all the other elements were against us but today's the day it finally goes in and as you can see it got too dark last night to get it all set up but we threw the visqueen over so now we just need to cut it about and tape it in the right places and what have you so it's going to be a bit scary this one because um i don't think we've ever done a slab this big and unfortunately we uh misplaced our current float or a finisher trial because this one's called so um we had to do a quick next full station revenue float because obviously you need one of these but nice little bit of new kits into the toy shop but there we go there's how it is everywhere which is it went in dry that's just come that's just it's not rain that's condensation out of here yeah that's just condensation gathering because it's warmer than either cold on the top it's just flooded and we kept we've got no rags we forgot to bring the rags we just tried the visqueen out plus we didn't realise it was going to be this wet we've tried the sponge we've tried insulation and then we thought why don't give this a give this a blow and because it's got this i mean we could use the sub team in hoover function as well look at that nice speaks for itself that so all you do is you just swap ends and there we go and it's dead light so easy to use dead small does the job if you go to the link in description below evolution website and then code brit lane and capitals you'll get five percent off anything you buy from evolution so as you can see we're finally set up and it is now yeah 20 past nine so we're couldn't it find 10 minutes till the show up roughly but there's this fish in that corner off now but it's done now we're ready all taped off gone around the gully sorted out this door what we've done here i'm sure dad's explained already but we've not gone we've not done an upstand with this one so the concrete can just run through and there's no breaks in the concrete so it connects to the existing floor and obviously the corners planks are ready for the concreters so let's hope this goes well now we're on to the scary part so see you when the paw comes in all right here they are 10 past 10 they were in a little bit later today which worked out good for us because we've got plenty time to get set up now so here we go let's begin the next hour hopefully this will be nice and uh filled up and ready there we have it concrete is in on earth is that anyway concrete's in massive thank you to the concrete company for getting that in slab and the footing but yeah so that's the that's the easy part done now comes the fun part of trying to get this uh level and flat on this biggest slab with nothing to tamp off of but we got this bringing out the new new toy like i said and i just give a quick try doing that little uh logo thing and it felt quite good so all right wish us luck let's see how this goes you