 Everyone shiver 1,000 here today. We're gonna be putting bulbs a tail light bulb and This 2010 Chevy Traverse I'm gonna try to do this in one shot one cut be done with it's real simple hang around Okay, guys, so first thing you want to do Pop these little caps off if still has them a lot of vehicles don't But ours still has them on there So pop these out he's a little screwdriver. I'm just using my pocket knife here Now this one has got hex heads in it Which they're 930 seconds, but they originally should have if yours has never been out probably they've got a Phillips head sometimes they've got Torx But I know these shivers they usually have They usually have Phillips head on them and I got one don't want to come out here. All right. Now this thing All it does is Just slide it straight back to you. All right now on the back here. There's where your bulb is You get your pair a little closer. I know the lighting is bad, but we're outside So there's not a lot we can do about it. There's your bulb There's your side marker light. This thing should just turn a quarter turn counterclockwise And pull it out and there's your bulb. Okay, so Pull this out. Check it make sure because these do get really hot Check in there make sure it's not, you know, anything's melted or anything like that Because this is almost a 12 year old vehicle. This is this I think it's the same on 2009 to 2014 ish so I mean if you got this style tail light you'll know but You know, this is the basics. They're all pretty much the same There's no right or wrong way to put this bulb in you just Stick it in like that when you go to put it back in Just reverse it. It's going to go in you just turn it till it pops in and then A quarter turn clockwise now you're done. Now let's have monkey go and put her foot on the brake pedal And we'll see We'll see if it comes on And we'll see if it comes on Your foot's on the brake pedal well so much for one cut Okay, she just went got the keys so There it is All right, let off left turn signal Okay, there you go. That was our issue and you'll see these things they get there's two filaments in there You can see that one's real black so it's blown. I can actually see it right there All right, so there you go now. Let's put this back in There's a little Right there. That's going to go into this hole right back here Now I got these wires yours may not have it. I got these on here because the trailer lights So we're just going to put this back in here and line that little tab up with that hole Push it in then we're going to put our screws back in and you're done real simple But these are all pretty much the same just look for hidden screws These ones are pretty easy because it's only got two Well now it's only got one Okay, let's wiggle them around they'll get started They don't have to be super tight guys. Just give it a little bit of just turn like that That's all there is to that Then put your little caps And there there's a little tab here And a little like a little notch there. That's how you're going to want them to go Just like that Nothing to it, but to do it Takes about 30 seconds Maybe a little longer All right guys, so there you go. That's uh That's on a a traverse is about the same or well. This is a traverse equinox about the same thing So you know you got something like this but all these plastic tail lights, you know if you got to remove them You know, that's the basics just look for screws take them out Yours may be a different bulb now this one if you do have one of these traverses This one is the 7443 There's the number right there. That's what your traverse will take And we got an extra one because the other side will probably blow so All right guys. Thanks for watching appreciate it. J. Bertha met the man alleged and gone for now Stay tuned for more videos guys. We'll see you soon. Bye. Bye