 what's up everybody welcome to the edge of tech i'm hiding behind this giant box let me know if you can hear me if you can see me okay all the good things i'm not late yes the the p1p is over here hopefully you guys can hear me and see me okay let me pull up my my bigger chat here why not there we go watching a desk get built uh yeah yeah yeah yeah everything's good awesome that's what we like to hear now i've been having some weird camera stuff going on so if that is the case we'll fix it as we go um hopefully we're ready to go i'm not going to take too long this is the snap maker j1 i i don't know a lot about this thing on purpose so i think it was like a Kickstarter or crowdfunded or something last year and then from what i gather they like pulled it and redid it um updated it with some things and then they're re-releasing it i think i think that's how it i think that's how it goes i could be wrong uh let me know in the chat if you know any more than that um i know some people at form next were able to see this sam's with us he saw it in person um yeah yeah j gtv uh you know it's funny i didn't expect it all of a sudden i got a shipping the day of uh the p1p stream i think that was wednesday or maybe tuesday night i can't remember no i think it's during wednesday's stream um i got a shipping notification that this was gonna be here on friday and i'm like well that's crazy and then i saw who sent it it was snap maker so i knew it was coming i just didn't know when i have no idea comparison to bamboo lab um i can't compare it yet because we haven't tried it i could tell you this is an idex machine um we'll get into some of the specs let's get it opened up let's get it working i don't want to keep sam waiting he gets a little grouchy you know grouchy sam's bad sam so yeah i got i got your favorite shirt on it's the edge of desk today because i fully expect from what sam was telling me he was at form next i was talking to the real sam apprentice there and he said this thing was shaking um like a mother and we'll find out we will find out i want one of those teas you can you can get them the teas are out there um the edge of desk we'll hook you up andrew um chat me or chat the hot makes um twitter or facebook and we'll we'll work it out with you for international shipping too um kaleb actually makes these in his in his house so he actually prints them these shirts are uh super nice they're so soft um yeah let's keep dampers on the feet okay here's what we're gonna do i have to start by unboxing this thing but this thing is so tall there's actual instructions on the top of the box let's see if i can show you there you go yeah mm-hmm there's some uh instructions on how to take this thing off you slip the box up pull this out take it uh off yeah like this pull this out yeah yeah so that's what we're gonna do but it's too tall it's gonna come up and hit this camera if i don't drop the desk so with that being said i'm gonna go here i'm gonna lower the desk one of my favorite things about this desk you guys might make fun of it because it wobbles it does wobble uh but i can lower it down like this and we can get rocking and rolling this is the snap maker j1 i don't believe besides the company's video that there are any other videos or streams out there on this printer right now um i'm going to keep this next to me so i can read the instructions we're going to go back up with the printer oh hence free look it's moving all the way to the floor yeah yeah see that's why i love this you guys make fun of the wobbly desk this is a stand frame and i made the desk on top of it for this reason sometimes you get some super crazy tall stuff like for instance if i had the the v 400 that thing is super tall i'd have to lower this desk all the way down um now that's a feature yes so this is what it looks like so far it's still in the packaging um so the next step looks like we're gonna pull you guys just kind of see the front of this machine this is what i'm seeing let me let me flip this thing around for you so that's how it's packed in there i do have to say this thing was completely covered in plastic um with a strap around it when it got here it is right off the bat it's metal i could tell you that um so that kind of hear it bouncing i do have my fans on high it's a little warm in here today if that bothers you guys let me know and i'll shut them down a little bit um so it's metal this thing is pretty big first impression of how it looks it looks sweet i love the brushed aluminum kind of look that we're going for here um let's see that it is big we're gonna find out how big now the next step wants me to get inside the printer yes thank you sam dancing taco for you for 49 thank you so much man i appreciate that we can't hear the fans that's good that's good um there's facebook group with some vids now the only videos that i could find were from last year so this thing um correct me if i'm wrong in chat snapmaker actually might be with us they they did see that i was going to stream they were awesome they sent me some information that i needed like a firmware update that i need to do right away they sent me um apparently the lubin slicer is not ready yet i'm not sure if they planned on anyone going live or videos right away but i i was like i'm doing this we debuted the p1p this week we're debuting the snap maker j1 this week why not um anyways they said lubin four five is not released at the moment so they gave me a kira plug-in if i want to use kira which is awesome they also gave me a list of gcode uh a link to some gcode i can use for test models so we're gonna do that too but um the next step is to take the box out that's what it says wow and that is a box i mean this thing is heavy a little bit nervous i'm gonna show you why so i'm not sure what's going on but can you see the back of this box is wet that is not my favorite not sure if it's condensation or what you can see it right here look the back of this box is damp it's like wet so i'm hoping that doesn't play a part in this i'm gonna set it upright maybe dry it off over there that's not good um this is the first real video awesome going forward to the genuine review video as the current videos that are pretty useless i don't know if this will be a review much as a first look hopefully not a first fail because it's somehow condensated i can feel on the inside of this printer um for documentation i'll show you with this camera because i want to make sure it's documented good joseph thank you so much 1999 thank you thank you thank you whoa we got colors flashing all right i want to show inside of this printer the the bed i don't know if you can see that with the reflection it's hard to see it's gonna be hard to see but if there's definitely condensation on the bed so we're going to dry all that off before we do anything because that's not good i don't like that launched on Kickstarter last year with slight revisions and manufacturing and COVID lockdowns delayed the delivery okay the desk desk sweat it could be desk sweat it could be filament on fire thank you so much i appreciate that five dollars the taco will be here in a second joseph again thank you for the 20 1999 sorry cardi b song that's funny um i ordered this printer yesterday i hope it's not garbage me too uh the condensation could be the silica beads releasing moisture uh they acquired at seed i hope so we're gonna find out um in the interest of moving along i'm gonna dry it up as best i can it's really on the it's it's like between the bilb surface oh i do feel it everywhere you know it could be the fact that it was cold filament on fire thank you so much you know it could be the fact that it was cold outside and this thing was in the garage all night and i brought it in here like an hour ago a little more than about an hour ago so it could be like getting to temp and and kind of like condensating because of the hot to cold but i'm gonna just kind of dry off as much as i can and we're gonna let it warm up while we're doing this i don't want to mess it up already all right so now it says uh take the box out take the foam packing out um of the sides here like this one like this one there we go i'm gonna let this thing like i said it's gonna dry or well that was crazy um kind of get itself situated the next thing it wants us to do is i'll spin this around so you can see this up here um matt what's happening um they've shipped all the Kickstarter units with most most of people are waiting for them to arrive in the us okay cool it's probably been shipping for a long time yeah sorry just joined what's the usable bed size we'll get to that in a few minutes i apologize i have to look that up because i don't know it off the top of my head um shane shane got the artist d living with clipper that is phenomenal let's see there we go we'll focus so it's gonna be crazy out of focus so we're not gonna it doesn't know what to focus on with that this top here so the next step is to peel the tape around the top and take the top off the printer which we're gonna do there you go 300 by 200 by 200 there you go 300 by 200 by 200 i should have probably brought this thing inside last night and let it like warm up or something overnight i don't know there we go it might help that uh i messed up and left my garage door open all night after i put this in there it must have like reopened after i shut it even though i have a heated garage so my heat ran all night so i'm literally throwing money out the door it happens though there we go uh i hope it's not garbage i've been waiting so patiently me too uh if you're cold they're cool there you go uh that's funny i gave shane my artist d quite a for quite a while ago he said he lives again with clipper which is awesome to hear by the way um yes if my my color is doing some weird stuff and if it keeps that up i'm gonna have to shut off obs and see if that helps um i'm running obs just for the background animation if people donate or join that kind of thing um and sometimes it did weird things it didn't do this the other day but today i noticed it before as well um if it keeps that up let me know and i'll i'll make a quick change and see if we can fix that all right so the next thing is pop this bad boy off so it is as you can see all metal it's it's very nicely built um it's got little like magnetic feet that you can kind of see in the corners let's see there we go all in the corners have magnetic magnetic feet which is awesome it does have a sticker that says when printing with PLA and remove the top panel so there is that okay uh next thing it wants us to do is pull this out maybe yeah what it wants us to do is pull the foam out of the top here maybe carefully i mean it seems like it's packed pretty good right now well there's a piece of foam um we'll just be careful looks like there's leds up in here which is cool foam foam what's up brian so let me know what you guys are doing there was a flash i saw it that time man hope that doesn't keep up we'll uh we will swap up camera stuff if that happens okay there's the inside of the machine so far it is i got to say this right off the bat i'm going to swap to this other view i mean you guys can kind of see top down cable chains up in here probably kind of harder to see because it's dark um ribbon cables running to each of the heads um looks like bowden tubes here that we're going to install shortly i'm guessing excuse me it looks like we're going to take a bunch of zip ties off but the inside of this thing there's an led strip here it looks really nice it looks very well built as far as you know thought out with the cable chains and the only thing in these cable chains here is the bowden tube here and it goes all the way out to the back which is kind of cool kind of cool huh um great video on the svo6 sam there you go um who else modbot released his svo6 video today and my video was ironically on the svo6 let's do this we'll be out tomorrow so that's funny we're all doing svo6 i was going to release it friday and i was like now i'm going to release it sunday um spoiler alert i'm sending i boxed it up and i'm shipping it out this basically i already shipped it out um by this point but uh you'll have to watch because i did box it up and it's out of here um let's see the real bamboo sam printus that's funny that's funny i saw that he ordered an s1 gotta get on that hype train somehow sam i know you've been wanting a bamboo for a while okay we got that out we're gonna take the printer out of the bottom foam now i think we're a foam now that's a terrible holy heavy all right i'm gonna drop this foam on the floor maybe here we go jesus excuse my whoo so just in case you're wondering bottom of the packaging includes some cardboard corners a cardboard bottom hit the camera on that one and a big molded foam uh insert that i'm hitting everything with there we go stop that from shaking um just not a snap maker without 40 tiny boxes that's funny um oh it goes let's see that was pressure from soul for black friday nice uh hopefully you like it sam after the neat yeah yeah it is pretty big wide wise i would say very similar um this way all right what's next we took it out whoo that's it we're done no uh let me grab let me open this up see if we're dry uh i'm gonna set this to the side a little so you guys can see what's in this box kind of get some stuff out of the way maybe we got stuff everywhere yeah this is definitely a big printer um from what sam told me at he saw it form next and he said my desk better be reinforced nice brian they definitely responded very quick to that um okay um it is tape sealed so in the interest of not wrecking the box i'll cut it open i'll cut it open nice there we go make a duet it says make a make a duet here we go let me get this a little further back so you guys can see top down what's going on here we go but so we're here uh talking about the snap maker j1 let me know if you have any questions i'm gonna pop this open and and i believe there's a quick start guide uh in here improve 3d thank you so much i saw it at form next and i like it awesome okay so what we got so far is a very white box that says snap maker j1 and i believe oh there's a calibration card right there here in this um we have a quick start guide it's color and some safety guidelines we'll definitely check those out uh maybe um never put that up a little bit like we got a quick start guide it looks like oh thank you very much improve 3d it's color which is nice it has a lot of pictures as we know i like pictures so there's that um so let's just see what they want us to do it looks like a lot of stuff in this uh in this box so let's let's get it unboxed because it looks like we're gonna need a bunch of it um this box is really nice by the way very nice packaging very nice illustrations uh it appears to be i'm not sure what this is a mouse pad or cloth it must be a cloth or something we'll find out i'm gonna set that over to the side the book is upside down it's not upside down let's see no maybe i was showing it upside down that's that's possible okay there's a toolbox box that says toolbox hey my camera is being crazy again now that i see it's multiple cameras it's either obs being crazy um or it is my atem mini atem mini jay what's up the box is upside down too it's not upside down it's right side up well kind of i could flip this thing around if you if you really must there we go here we go just for you guys so now let me turn that background there we go um i've been hovering over the j1 without sending out any units for unbiased reviews i don't think i'm alone in waiting um yeah i i have no literally back i i don't have any background on this zero so this is going to be a completely um probably safe first take and we'll see how it goes i mean that's that's about where i'm on this one all right inside of the toolbox um us we have a snipper we have a wi-fi dongle it looks like we have a bunch of tools here which is nice i don't know what this is oh sd card that's a full-size sd card this is a spatula that's hiding in here nice i like it all pretty decent tools in there too let me keep it in there for now underneath we got the power cord the usb cable looks like spool holders there's one and there is two spool holders and a box called accessories see what's in here real quick yeah i've been working out with the printer yeah yeah whoa i keep seeing that you might have to do something looks like a bunch of screws in here um some orange socks maybe replacement socks some nice color-coded allen wrenches let's see i gotta check these out because that's different look at that color-coded allen wrenches you see that that's pretty nice and they're nice feeling too by the way and a little wrench there i'm gonna keep those put in there it feels it feels nice does that make sense it feels nice like i said a box of screws m3 by 6 and m3 by 8 screws so we might need these i believe maybe i'll set them out i'm gonna set the replacement socks back in here because i don't think we're gonna need those right way i think we're gonna need that right away but we'll find out in a second all right so we'll just keep moving along put the screws this way i would ask anybody if you built this yet but i don't think so i think this is the first um a couple of boxes of filament this is 500 gram filament so combined we get one kilogram of filament it looks like pla and they do put the colors on here we got white and orange so there's that i think you're right with the condensation it's probably um because it was cold and i moved it in um we'll be opening that up in a second these uh sam you're gonna be interested in this uh when we get to the filament stay tuned and i'll tell you why okay underneath all that looks like we have some panels this explains why we have some screws um this is a door panel or one of them yeah it is super thick you see that i could measure this but it's it's very thick um nice that's a very thick panel got a little uh barrier here between this one and that one so we'll keep that there so you don't get scratched even though there's already plastic on the panels and there's another panel man these are thick oh this is actually two still pretty thick jeesh um all the way down in the bottom it looks like we have our build surface and this appears to be a glass build surface with a textured pei top interesting so it's not flex it's it's glass clearly glass you can see the reflection but it's got a textured like pei style top so we're gonna get all of this set aside make sure i didn't forget anything i didn't i'm gonna uh take this by i like the the box the packaging has been really nice packaging has been really nice um we'll launch that over into oblivion and then what we'll do i'm gonna set this this is heavy too by the way this this piece of glass is heavy i'm gonna set it back here swap cameras just for a second bam got my bubbly going on let me know what you're drinking in the chat and i always like to ask matt looks like doing he's doing good no magnetic sheet no magnetic sheet um all right quick start guide oh let me allow that there we go go there you go mexican coke is usual mexican coke is the best coke because it's made with real sugar drinking coffee i love it i had my coffee this morning a bitter shandy all right all right tears of prusa no comment no comment americano i love it let's get rocking let's get this thing fired up chop chop in the words of sam so it does walk through everything that comes in the box it also gives you a list of everything in the box which is a really nice this book so far super good i love pictures and literally 90 percent it's almost all pictures um there we go look at that there's a little bit of words up there but picture book is how jim works um i love picture books all right it doesn't even say it just says remove all packing material and then it goes through the picture so you got to remove the tape um that is on the sides i already did that off the boat and tubes we got to cut all these um zip ties we're gonna use their nipper side cutter nipper whatever you want to call it it looks decent not bad got some oil on it let's just go in here and i'm gonna try let's see if i'm gonna try to give you guys the best view of this whole thing there's a lot going on here and this machine is big um but let's see if i can let's see if this does anything for us kind of the kind of does so you can see a front view and then kind of what i'm doing on the inside i'll say so there's a zip tie here we're gonna cut that bad boy there's one holding this extruder yep here's one back here and they love going flying they love going flying there's one here just don't cut anything don't cut anything important don't be bad there we go those were holding the belts by the way the top ones that were up here they were holding the belts um i think that's all the zip ties i see so then we go to uh in the front here all right let me go back over here let me did i just put that i just clearly lost a little cover for this go there it's boom boom shaka laka if you have any questions let me know i'm going to do my best to try to watch them and i know there's a few mods out there if you're uh seeing any you can hit me up as well um french vanilla coffee love it um it's not quite two bamboo size printers maybe one and a half um moving soon andrew s nice okay side cutters thin gantry um this is a thin gantry but it it appears to be i can't tell what it's made out of to be honest i don't know if it's metal or not this is very loose though that belt okay what's next how stiff is the bed um it's glass this is pretty good we'll find out in a minute though all right so next thing it wants me to do is remove these little foam inserts here there's just little foam things where the door hinges are gonna go so these guys they flat pack all the panels for the sides so there's less of a chance for them to get broken they were packed very well um so i think i think that's gonna be you know i think it'll be pretty solid that way um let's see it says there's something under here i think i already grabbed it i did that was foam there was foam under there i already took that out we cut the zip ties there check um it says oh tape now wants me to pull the tape from here so and oh that's an interesting locking system for the bed all this is brand new to me like i said i had i have zero knowledge of this printer until now so interesting how that works we'll go over that in a minute um looks like a toaster oven it's big yes um let's see yes okay next tells me to put the top back on okay we'll put the top back on that doesn't help us with uh showing you what's going on so i'm gonna not put the top back on just for now and we'll go to the next step knowing that i didn't put the top back on deal deal place the printer horizontally well it is horizontally mostly wants me to put the spool holders on now and i'll spin these around so you can see this is the spool holder area we did hold those out and it looks like uh they literally let's see if i can show that they have like a flange or a tab i guess that's a better way to say that and they pop up an in like that i would have probably like to see these bigger but this is good and bad because it's kind of short so your wider spools will be pretty close pretty tight on these but what's good about these is i believe this is an easy enough print to copy that once the community gets these they're going to remodel these and probably put bearings in them too it'll be super easy to do so that's cool all right install frame holders place the printer horizontally i mean like it's been horizontal this whole time so there's that i'm sorry if i keep making you uh make why do you keep making oh diving board printers i see what you're saying gotcha john thank you so much working on a voron will i watch kit nice okay what are you building nice all right next we're going to put the front doors on we need the allen wrench some of the m4x8 screws and the front doors so in order to do that efficiently i'm going to give you kind of a side view like this i'm going to set up another camera to show that better because it's going to be hard to work if i face this towards you and i'll get my own wrenches there we go bam it's a little better so there's little channels right here and the doors are going to go right in there if you know me you know i prefer my t-locks link in the description below t-locks i said t-locks t-handles is what i was going for they say it's a 2.5 which is nice that they give you the size so i'll grab that i'll grab those screws and those were the m4x8s and there's only four of them and it's very nicely labeled so there's that man it's so dry here that my hands are super dry sand printers how fast let's see so there's our screws let's get one of the doors going and it says just basically put them on so there's that um let's see maybe there we go just got to make sure which door is which all right there's a little tab the handle goes up so this goes up uh we'll do that here we go so that this is your handle here and there it it's a magnet so it hits the end of the machine and sticks so there you go there either is magnets in here or this is not aluminum because it definitely is magnetized so this if i don't break it and it looks like it goes in like this and there's just two holes that it screws into so we're gonna do that we're gonna do that does this have a top dome it does not have a dome but it has a flat panel for the top let's see if i can do this on camera uh without you know breaking anything get this knocked out all right that's why i love t-handles i can use so i can drop them like that yeah i was gonna say so i can use my left hand because i really suck left-handed okay ambidextrous i'm not oh boy mods i'll let you take care of that we're gonna print a side panel uh they're not on this one there is side panels i believe only 84 we'll find a girl that's funny that is funny see i was gonna allow sam printus to be a mod and then i realized he would click that and get girls for all of us so i probably better not um next thing you know all the girls are here it's only girls okay 80 well at least for 84 percent of us right too funny all right door panel number one on and um um if you can see this it's kind of hard with that light isn't it what we'll do this for you this this is better than the girls there we go well what in the world this has got to be the wrong side or something because that doesn't fit huh that's the way it shows in the oh i lied hang on hang on i'll show you what i did so you don't do it so this i opened this hinge right here the hinge is supposed to be closed when you put it on on my fault my fault read the instructions i think you messed something up yes hey i i am failing so you don't have to how about that i'm gonna swing this camera background because well we don't want you to uh be getting hit by the door all right real quick i just had the hinge wrong i'll show you what i did again in a second if i don't drop everything okay so i had the hinge like this and it tells you to install it like this so that is my fault well that's what they say interesting yeah so that actually makes more sense because this whole channel um you can kind of see it here fits into the channel into the side of the printer there you go frosty acrylic no it's uh there's a there's still a covering on it so that is much better it fits in here much better and there you go so i just needed to look let's see if i can if that'll stay up quickly yeah almost like they planned it that way what no it's amazing what happens i'm not going to tighten it yet edge of hinge now yeah yeah it's i'm done with desks it's all hinges all hinges all day and if we come unhinged then then the real views happen okay so i'm gonna hold that like that tighten it in tighten it in now look at that look at that um the nice part about this is it does have a pretty good coating here so we'll give that a minute we'll peel it off in a second now that i know how that goes on next one i'll go on in a second boom it's almost like someone said they almost like they planned it that way here oh yeah there you go there you go the sbo6 is a surprisingly good printer absolutely until you have to send it back or send it out at least see that tomorrow this is going to be interesting because i'm working inside myself here but long as it goes in like it was intended it'll screw in easily like that super easy what's up light speed leave it on that way it's more fun huh tighten i think there's some people in here that have this ordered from Kickstarter curious how long you guys have been waiting because someone said it's been a while all right a little magnetic there it stays we got the uh plastic on and whoa there you go now it's for y'all one more a little slower there you go there's your doors beautiful next are the side panels m3 by sixes there are six 16 there's 16 this is the only downfall about this is going to get all sorts of fingerprinty i know it's going to happen we need a bigger allen wrench for the side panels we need a two millimeter allen wrench because we'll go to my two millimeter t handle i'm going to turn this machine so you can see the side like that okay install side panels there are eight it looks like there are eight screws in each one and i don't think i can mess this up too much always rip the band aid jim yes i think the top screws in the first door need to be tightened i can check them that's always you know always good to check right put some tint on those doors there you go i like that there's a side panel this is where i wish i would have just grabbed my drill because this will be a minute that's going to go on like that and there's going to be eight m3 by six i do like that they label all the bags more more more companies are doing that it makes it so much easier for the consumer costs a little more money but it saves us time because you don't have to try to identify everything all right these are tiny let's see john true but that's pretty meaty hinge it is a big hinge i just noticed something i got to peel this first or mostly because unfortunately it looks like the screws the screws will go over that and then we you know we'll have to peel it out from under the screws each one of these do you have a little bit of blue um loctite on them by the way i don't know if i can show that but there is a little blue loctite on these um vinyl wraps for a voron nice nice now this could be upside down or i just need to lift it up there we go i'm gonna say not quite meeting up where i wanted it to but now it does just rip it off there that time yeah the little bit of thread lock also something that probably costs a little bit of more money to do because somebody has to put that on there somehow or a machine or something does that but it's nice that it's there so i mean so far it seems very well thought out packaging was good um the only thing i suggest is if you do get this thing and you have to carry it anywhere rip through the plastic that i did not or and poke the handles through that i did not see so i did not see that this thing had handles i carried it from my house to my uh truck to my truck into the studio down the stairs and all that stuff and i didn't realize it had handles so i took all the plastic off so that sucked and it's heavy so carrying it without handles is not my favorite so this it tells you to take the top off when you print PLA this is why you wouldn't you can't you could take these off every time but i wouldn't want to why would you want to take all these off the whole time okay there's one panel here we go um let's try to turn this thing around without touching everything too much and we'll do the side panel here what you guys think it's so far let me know in the chat honestly i had no idea what to expect because i didn't know much about this printer so so far so far so good how far are we in here about an hour in but i'm also talking a lot so there's that that's that's common for my streams right okay i'm just peeling this one um looks like a solid machine just leaving the front door open when you're doing PLA you could do that yes there we go i'm gonna whoa buddy whoa buddy oh yeah i gotta start by peeling this too there we go okay let me get one of these on here it's really weird looking that's a really that's a really weird looking desk thanks andrew appreciate that it's my new uh mobile silver desk it's actually comes with me all right it's got so far i want to see how everything lines up with the extruders i do too um i honestly i i didn't know going in how much um how's i going to say this how much setup this was going to be i thought maybe it would just come set up more or less but it is smart to keep the side panels packed nice um and have them put on like this you get less breakages and shipping then and we know how shipping companies have been to the printers lately not great not great there we go any leds yes there are leds in the top of the machine that i see so far john um there were spacers in the top yeah that is going to be a thing i think so why not do that if you're going to print PLA just throw some spacers up there it is magnets so you could easily do that um what was this i feel it needs a disco ball it might need a disco ball i think we're dang close here the sides are almost on then we can start going through the uh stuff i have a new firmware it needs um let's see all right let me just make sure these are all tight maybe i'll check the door too someone said maybe check the door ones so i'll be sure to do that i mean it looks really nice doesn't it okay there's that all of them had this mat it's like this this cloth between all the panels and it's it's actually nice cloth i'm going to keep this use it for something um all right oh again the only problem i'm going to have is if i move this thing it's going to cause fingerprints but you know that happens 2.5 let me just check these someone said to double check these that's completely tight tight tight i missed that one's tight they're all tight for peace of mind they are all tight uh there is definitely desk wobble here yeah we went over that earlier in the stream and i'm over it already um this is a stand desk and uh it does some it goes up and down as we saw a little bit ago earlier and whoa whoa color stuff all right well it's like a disc it is a disco ball happening and it's crazy now it's doing some weird oh that's the door i was like what is it showing they aren't aligned um what's not aligned i don't know what you mean i'm not sure what you mean ob sb tripping i think so i think so okay now we get to put the uh pei glass plate is what they're calling it it's called a pei glass plate it is literally a big chunk of glass with um pei on it and it appears that you flip these open and it should do a good wipe down i will and then you slide this thing underneath here like that maybe like that okay and then close it all right so it is all the way against the back pretty flush here there we go making sure pei glass plate is open good connect the power cable done done done that's next so here is your screen let me know in the chat i'm going to go back here just for a second in the chat do you want to see the screen boot up when i do this um or you just want to see this wide shot and see if the smoke comes out i'm i'm assuming that's not going to happen but i said that out loud so i better first thing i'm going to do as well i'm just going to give this bed a wipe so i don't forget got my 99% isopropyl and i'm just going to clean this bed off not yellow i just want to point that out um that's interesting bamboo was not yellow as well if you guys do this a lot you'll notice that your beds are yellow after manufacturing which is crazy oh rich what's up man robin's here okay they were mirroring benches and i didn't see any blends ooh we have to check that out the same as record okay all right next we're going to power this bad boy on the power plug is in the rear let me know what do you think you guys want to see the screen um while it powers up or what i need to do the firmware up right away so i'm actually going to work on that as well um but we're only going to do that after we powered up for the first time and then we'll power down and do this firmware and before i do that this firmware this this um i gotta show you this the sd card oops the sd card comes in its own little case that's how much packaging they put into this thing so you actually have to bust it open and then get your sd card out interesting huh and it's chrome it's cool it looks cool all right hang on in the interest of time i'm gonna pop that out i'm gonna pop this in and get the firmware on here i do have the firmware already so i'm just gonna put it on here real quick and that camera i'm telling you it's like a someone said it's like a disco ball you're right all right as far as firmware goes i don't know the answer to that i'm gonna copy it this time not cut it there we go okay firmware is on the jump drive i'm not gonna boot it the first time with the firmware because i want to i want to see how it boots up first and then i'll boot it up with the firmware um and we'll double check versions just to make sure it worked as well so there's that um just a heads up there's an add-on port in the back whatever that means a usb port oh the usb is down there okay so a bunch of us said the screen i believe i imagine it's proprietary i i'm guessing it's proprietary too i don't know that answer though i cannot tell you what firmware it's using okay here we go let me grab my chat back up here boom boom what's uh retired wow what is happening with my cameras so you guys are getting a disco show too okay i just flipped it on here we go maybe there we go lights immediately by the way lights came on up here the whole machine is lit up pretty good looks like by one led strip across the top so that's interesting it is booting the snap maker screen i am topping up my first water it is still booting up so there's that okay okay okay still booting up there we go so now it's asking like english and all the things here um do you guys want to see me run through this or should i just turn it down and do the firmware right away i hate to configure this thing and i have to reconfigure it um yeah that's what we're gonna do i don't want to go through the configuration twice on the on the stream here so here we go this should hopefully firmware it we'll find out like i can confirm the firmwares on the sd card this did take a bit to boot up the first time i choose chinese if i'm brave enough i'm not i'm not brave enough especially not on stream i guess i could use my phone to probably translate it in real time but that's not what we're doing today maybe so it's back to the same thing um did you check if there's a newer firmware yes i did they sent me the newer firmware i hope it went on there's no indication that that is true so when we get through i'll check the version because there is a version on it so i'm going to go english next you guys can i'll see this right i think probably the best i got right there um terms and conditions i guess i've read them next i would suggest reading all that by the way um would you want to be a part of the improvement program sure name your j1 uh so right now it's called j1 uh 1550 um all right here's the deal what we're gonna do first person to do a super chat with a name i will call it that you guys have a minute we're not gonna take long on this but if you do a super chat toss a name in there i'll name my machine that real quick it'll be fun why not mix snap face i like it people are giving me names well that gives me just a second to clean up a little here too because i got a lot of stuff going on here let's see if anybody actually does it snapper mix snappy face i like it all remember all of my bamboo printers are there are matrix characters so this can't be that um everybody's liking gym like that that's hilarious um there it is uh ha nailed it oh oh no improved 3d uh with the first one to get through with improved 3d and then andrew rogers deskie mcdeff's face so here's what i'll do improve 3d you win i'll give it that name now and then andrew rogers before we end the stream i'm going to attempt to try to change that name not sure if we can or not but thank you guys both i really appreciate that um so it's improve 3d okay here we go capital i can i make it stay capital i can this is all in good fun right improve 3d here you go oh you can't see it let me see if i can get you in there oh it's gonna be hard improve 3d thank you guys both for playing along that was funny and fun okay it's hard to see now with that white screen on the camera and now my tripod being crazy here here we go um thank you guys both andrew i will definitely try to rename we're gonna see if that's possible so improve 3d you win uh i got it i got a j and j one uh for jim i like it i like it make it proof to somebody says improve 3d there you go there there's improve 3d on the screen save wi-fi do i do this okay i'm gonna do this but i'm gonna take you away so you can't watch my password not that you know where i'm at but if you ever found me you know just making sure let's see if i can actually get this whole password in here on the screen i'm actually pretty improved with this pretty improved pretty impressed with this uh this menu so far see if it works should probably put it on my guest network but there is that next maybe i think it's still trying to connect um setup is complete okay back here whoo password password yes um the j is from jd woo ah interesting interesting jim is great i like that one um so now we go through the wizard we're just gonna walk through it here's some safety notes handle the pei glass with care um avoid direct contact when it's hot etc go uh so the extruder will the left extruder will touch the bed it's actually telling you everything that's gonna happen um so it says the left extruder will touch the bed at different points in the sequence um you need to adjust the z offset at two of these three points under the instructions okay here we go i'm gonna do this now you guys can see that a little better is that okay let me know if you like that view it's a little bit crooked but we can fix that there we go now we can actually watch these extruders work so um remove oh wants me to remove the pei glass plate jeez you just told me to install it in your instructions okay so i just i just removed the pei glass plate start uh heat nozzles and bed next oh it's doing that right now it looks like so both nozzles are heating up and the bed's gonna go to 60c and then we'll come back in a second when we get there okay let me catch up on comments um i'm gonna put the top on in the second two i need 3d printing done please improve deskemic deck space i like it i like it i thought sam was gonna jump in there and say the fake sam apprentice or something but um snap that tweeted snap that and tweeted out improved yes if not i can get you a picture of that make it prusa that is funny neo jay for random letter one two three four it's not a bad thing these are passwords oh we better uh we better hide that one can i hide that no i'll just remove it sorry god being family-friendly ish um the real san francis funny joke let's see beefy rods i hope it takes the glass bed installation yes it did tell me to take the glass plate out so there's that it's almost a temp already there's a top go on and off for easy yes bamboo abj one ha funny okay we're gonna put the top on quick because um why not it might actually reflect some light too down there so the top literally literally sits on like that and it's a magnet super easy to take on and off it looks really nice um if i give you this view you can kind of see uh you can kind of see this is what it looks like and there's one of the warnings to take it off while you're doing p pla um let's see a pair of birds interesting uh big orio for the side panel there you go where do you uh you know what i better look back at the instructions i didn't put the voting tubes in i probably said that do that i'm guessing let me see no unless it's in the instructions later that i didn't get to it i don't see it in here to put the voting tubes into the hot ends um i could be missing this picture place the printers originally put the filament on even the pictures show um let me just look let me just look before we so that's how easy it is to take off yeah you've got to go in here i didn't see it in instructions anywhere but you know we better do that huh maybe that's going to be interesting i'm hoping it doesn't push down in that i can see and there's like a little swirly i don't know if i can show you this very easily there's little things that spin and your vote into you probably should go in that you'd think and then come down like that maybe hmm pictures and instructions yeah funny i'm telling you i'll go through the book again um but in the quick start guide i don't see anywhere saying to push these in or how to so i see how they clip in like that but uh let me go back here it's still doing its thing it's ready it is ready for us here so i'm gonna hit next let me go down a little so you guys can see the screen too um the path is very low stress on the craft wow let's see maybe it will be after you put the bed now i went through the instructions here it told me to put the plate on the top install the doors um i'm gonna hit next because i don't know how long this takes so i'm just digging through here again now i will show you real quick clean the nozzles it says clean the nozzle nozzle with with the wire brush make sure that there's nothing on them is there a wire brush do they give us a wire brush somewhere let me look let's see um there is no wiping cloth for the sides oh that's what that is oh there is a wire brush somewhere in here let's find it let's find you wire brush there's tweezers there is wait a minute that's why i didn't see it so this look like a wi-fi antenna it appears to be a wire brush e wire brush so it wants us to clear it now there is some filament just kind of tripping out here so i guess we'll clean it off interesting wire brush design a little corkscrew design here i mean okay both are clean check here we go i am also oh geez that's going up try to get you guys the best possible view of that happening i'm curious how this works too so in the middle of looking through instructions trying to figure out how the boating tube is attached it literally doesn't tell you and the instructions to put your boat and tubes in so a snap maker if you're watching you definitely need to add that i'm just making sure i'm going through everything one more time yeah turn on the printers go through the settings so in your quick start guide it does not appear that you said to push the boat and tubes in so you just ever we're probably just going to leave them out if you're just a brand new user definitely something to do and now they did full disclosure send me a full manual so they sent me a link to a full manual so get up in there huh this is all right what are you thinking it's moving fast yes knobs for leveling i'm not sure i didn't turn them it didn't tell me to yeah that's funny true story is this using string gauges for probing no i don't know there's a there's a point on the bed and i can tell you there's a little bit of oozing filament i can see it stringing up and down in there you might be able to see that too here that's what it's doing right now where's the bed it's off so you you level this without the bed on i'm hoping it does tell me about the tubes conductive probing i don't love the what they went but let's see jgtb right no ruby nozzles that's funny all right it's just doing its thing oh hang on it told me to do something i need to go on the front here because i can't see the screen all right it says rotate the level wheel under the bed to move the orange bar uh the orange bar to the midpoint if you don't see any orange bar keep rotating oh so on the screen oh too far i'm going to show you this in one second i do see what the the wheels are for now this is super cool so real quick down here it tells you to rotate the the knob that is probing right now and if i turn it i'm just going to show you if i turn it this little bar here goes way out of whack you see that what if i turn it back as it starts probing it brings it back towards and it tells you where you're good at interesting so we're good there next now it's moving to the next point and we're going to do the same thing that's way off you see that it's going up and down um i'm facing away from chat i apologize but there we go this is super cool okay next i don't know what it's doing now so we're going to find out i can show you up here it's doing this moving you'll probably have to do that on the other side now trying to get around here see your chats this is cool yeah this is not cool shoot should be able to leave it yourself there's no filament loaded must be a factory test yes compensation yes another reason to call oh geez um okay so we're going to keep going here complete the two extruders touch the heated bed in sequence um we just you need to calibrate the z offset of the right extruder to ensure that the two extruders are at the right and the same height what i do like about this oh tells me to loosen some screws what screws turn and loosen the two screws on the right extruder um with the 2.0 key and tap next huh oh those so what it wants me to do i'm assuming this is your right extruder over here it wants me to loosen these two screws here here so um that's super interesting okay imagine we're only gonna have to do this every time you move it uh two point i think it was 2.0 it said yep okay it said so loosen those the screen tells me to loosen those and then tap next wow this is interesting i like that it's walking you through though i do i do like that it's walking you through the issue you know the printing i don't know how much to loosen them so we'll just loosen them in general so they're not tight i guess two or three turns out here we go i'm going with that um next um for the sequence nozzle cleaning and calibration machine heating the nozzles okay so it's heating up the nozzles again let's see if i can get you back to this view for a minute and we'll go back to here till it's heated up so this is interesting it's literally walking you through everything on the screen which is cool um night color what's up let's see the price on this bad boy need to double check that i believe it's pre-order right now um let's see over a thousand i think okay let's see well you know i see it both ways this is kind of calibrating everything you know it's just getting it all calibrated hopefully we'd only have to set this where it's going and do this one time all right i think we're there next now it's going to do something here you go i'm going to go on the other side of the printer and check this out um see what they want me to do here cleaning the nozzles oh watch me to make sure they're clean again it looks like they're both clean i can i can i can verify they're both clean here we go well now it's going down interesting so these up here are your wipe pads it looks like so that's where the nozzle would wipe between printing all right it's coming back up we'll see what it does now it wants me to do the same thing with this side and i can tell you uh in in showing this earlier it's in the green already i'm just going to adjust it just barely okay good now it's going down can't hear the stream got my x1 carbon printing funny oh no video's frozen hang on i'll get there um give me two minutes i just gotta apparently fix the stream it's been uh being crazy for whatever reason and now it looks like the video froze so just a heads up it finished the calibration over here on the right extruder and asked me to tighten those two screws back up so i just did that really quick hopefully you guys can still hear me i think you can um video glitch stinking i'm gonna shut down this done done done camera go here we should be back one second all right i think we're back i i cleared obs i shut off stream labs um it's been being weird if it keeps being weird now we know it's not obs okay um doing all the beeping and bopping yes yes yes all it did is it the right the right side came over hit that pad a few times i adjusted it so it was orange just it took up just a little bit of a turn and then i tighten those two screws back up we're good okay um so let's see what this is this uh uh restore the nozzle already did that calibration successful so really it's not gonna take too long now a z y offset and needs to do this um we're gonna do that it's gonna heat them back up so it's going through a z y offset now one thing i would like to see is it keeps dropping the temp and then having to heat back up it's not taking long um but the bed did go down to 52c and the temp was like 130 so while i appreciate that the temp drops between each step so in case you walk away you don't forget to shut it off um it is calibrating i kind of like to see the temp stay up through the calibration myself so it doesn't so it's faster at the same time if you walk away you know there's that all right let me put these back on and hopefully they're incorrectly and um we'll find out so we're printing PLA we're gonna pull it off anyway okay yeah yeah yeah okay what are we doing here we're waiting it's it's heated up it looks like almost at 216 217 and 59c just go just go yeah oh it is doing it thank you i just saw it happen i wonder if it's my 810 mini now which is not great i i think i remember when this happened so if you guys remember if anyone was with me i did a stream where i plugged in a laser and everything shut down um well video wise i think it did something to my 810 mini which sucks because they're expensive so i'm gonna have to see if maybe they'll fix it for me all right yeah okay so it says clean the nozzles again make sure they're clean they are i'm gonna hit next and this is the um this is an x y offset it says so it's going through the x y offset the machine is calibrating um automatically it says well this is taken longer and i thought it would be that's okay that's okay what do you think so far what do you think so far how strong was the laser i think i don't know it wasn't my favorite part of the day when that happened so now it's um calibrating x y so there's actually a hole in the bed where it's calibrating right now i wonder if i can get in there and show you this maybe let's see you see this there's a hole in the bed and it's like touching the side of the nozzle in the center there hopefully you guys can see that okay um and then i hear the warning oh that's not a warning that's this okay good thought my GoPro camera was gonna die there for a second so yeah you can see the hole in there now right here in the center of the bed it goes down and must touch the sides i'll you know it touches the sides up in there looks like it's been calibrated the x y which is great calibration successful offset calibration check the machine will be uh print a pre-built in model so now it's telling me it's gonna print something but we haven't loaded filament yet so there's that don't blame the GoPro it uh let's see print a built-in model with both extruders by observing the model prompts on the touchscreen you'll be able to check the calibrations are successful okay do i need to load filament okay it's going through checks i'm going to go down here again so you guys can watch this hopefully you can see that i think that's probably the best way a pei glass check um so it wants me to wait till the bed is cooled down um under 40c before operating the glass plate so now it's cooling itself down and it's actively changing here too so this might be a minute 52 we'll take a step over here for a minute all right we'll just do this and say hi while we're waiting hi what do you think so far i remember stream of the latest the greatest printer with the gantry falls down in the that's funny um let's see install the bed yes i'm waiting it told me to wait till it's 40c or less sorry sorry um it is at 49c i'm gonna follow instructions whoa we just had some serious um video again huh i'm working on it well that will be no fun if it doesn't come back up right there we go we're back i am fairly certain it is now the itimini which is very sad yes it's cooling down it was i i did it on purpose so you wouldn't have to watch this thing get down to 40c it's only at 45c currently the screenshot it um it is it is cooling down slowly 45c it says wait till we get to 40 what do you think should we just go for it i i like hot with blue skin so i'm i'm now avatar is that what's that's what's happening right now um 44 44 you can see it here it's yelling at me right here 43 and two degrees let's see if it actually changes and tells me to install the bed that'll be impressive right just do it i think it's just doesn't want you to hurt it that's my guess 42 that's my guess right now is it it just doesn't want you to hurt um the surface or something that that's my guess i don't know come on 41 we're at 41 people i like the animations on the screen instructions you know what i do then you have a tire looks rubbish i haven't seen it um yeah you know what the instructions on the screen have been on point very tight i like it one more degree and then we'll see if this changes here this warning goes away or something come on 40 it's a 40 oh it says under 40 so we have to go to 39 in the in the interest of arguing one degree i'm really curious if the screen changes that's all i want to know i really want to put it on there hey look at that it did change that's cool i'm wondering if it's so you don't burn your fingers putting the putting the bed back on the plate like that okay next load filament go to uh let's see tap go to load load two filaments of distinct colors orange and white into the extruders if the filament is already loaded um okay great so this all right i have no idea what's going on here do we say heat do we say heat sure heat it up so we got to get those two 200 degrees celsius while we're doing that i don't think you guys need to play with that all day let me open these boxes up hey we still have we still have uh videos so that's good sam uh i think you're still with us yes it is um look at this spool and tell me if it's similar sam just out of curiosity interesting i thought you might want to see that i like the boxes boxes are cool i've got stuff everywhere by the way and they get there uh we have an orange and a white super chat from simon hey thank you so much simon i apologize did i miss it i did miss it i was apparently frozen or something simon snow 25 buckaroos thank you so much man i really appreciate that thank you thank you thank you um cardboard spools looks like polymaker hmm i would not be sad if that was the case just gonna throw it out there would any and their cardboard yeah yeah yeah smells like filament hey did are these receivable no they're not okay whoo i would have laughed if they were um i fixed your photo on twitter oh no oh no i don't know what you did but i might have to go look so it's um it's telling me basically to shut up and load filament so there's that i'm working on it i am working on it so you push it in manually till it stops i'm assuming hopefully till right there i can't see what's happening taking this off taking it off ah so if you're looking at the machine um okay if you're looking at the machine straight on this side which will be the back left is your um right side and this side crosses over to your left side if you're looking at directly on just just a heads up up yes 500 kilograms but their actual spools so we can actually do some cool testing i love that the spools look very familiar which i'm okay with um so i pushing trying to push film it through okay i'm only getting to like where i thought it was gonna go in so let's see what happens now the extruders will move into position for you to load to your filaments uh is it moving i don't think it's doing anything i don't think it's pulling it oh i don't think i was pushed in far enough now i feel it pulling it i might not have these tubes in right i might look in the manual that's for you um assuming it wants it to go until it stops purging or starts purging i mean there we go here oh of course you're not looking at it is dumping filament now stop loading we have orange from this side which is loaded on on this other side just a heads up all right we're going to do load on you it's going to move thought it was going to move yeah i don't i must not have these in right because it's not now it's loading interesting i'll look in the manual and see how you're really supposed to load these because to me it doesn't feel like it's right right now but here we're here we're going 500 grams you know i don't know what i said what i say kilograms can i wake up yet wake up that was loud um 500 kilograms spools i must have said that that's hilarious it was about me you're safe i wouldn't pass um i would i would have read the manual nah i'll open the manual how about that let me go see it user manual i mean they shared in fairness they should be telling us hey dummy this is how you put your tubes in in the quick start guide um i would expect that would be a thing right i mean wouldn't you expect that to be a thing quick quick start guide says this is how you load the voting tubes in i mean that is the reason for quick starting so so far the manual is literally just like the quick start guide talks about that talks about the touchscreen i'm scrolling pretty quick here but filaments pla recommended filament temperatures abs all right we're good we're good with filaments we are now heating the bed back up um i'm gonna go back here so i mean i could show you the manual they sent me it is online it's just a quick start guide as far as um what you get with it but so far i don't see anything about the voting tubes there's calibration auxiliary mode loading filament auxiliary loading oh i might have found it hang on okay i'm gonna share this with y'all because this is important let me go back over here i don't know what kind of stuff you're talking about someone can ban andrew rogers what'd you say oh no yeah yeah uh all right let me let me share this with you because this is pretty important um so this is a manual i got that they link you to online um i found the load filament or auxiliary loading part right remove the top trim it to a 45 which is great um we did that push them in which is great make and this says feed the inlet into the look yeah push and hold the side buttons on the side of the printer or printhead outward insert the filament into the printhead until resistance is felt and then release okay um when the target click feed great and then insert the guide tube and snap it into the clamp then refix the top plate so pretty much what i did i pushed it through till it was hanging out of the tube pushed it down into the extruder and then once it was pulling i clamped down the filament here like into the little guides um and i get why they have to do this to keep it away from the top right um but but every time so this thing's doing its thing it's getting hot it's waiting for the bed to get to 65c i believe it's at 55 right now so we're just waiting again but here's the thing every time you change filament am i going to have to pull the boat into you up and out um and it's not like pushed into the extruder right it's kind of just like clamped down sitting above it um i can show you so here's one right here this swivels back and forth this can pop open and you can take this tube off real easily so you push your your filament all the way through it so it's out a little and you push the filament into your extruder and then when it's pulling then you clamp that down and put your boat into you know in the side like this am i going to have to do that every single time i load filament um not sure that's what it seems like um we are at 61 62 but my extruders are losing heat we're at 89 and 88 so it's only heating the bed first we're almost to 65 someone says 65 seems pretty rich uh pretty hot for pla and i agree but it'll work so we are an hour and 48 minutes in let me know what you think uh you had to remove the tubes every time on the old maker bots that use a similar tube okay got it um you know you know not my favorite i don't know if ryan's watching but i don't you sent me a chat i don't i don't i wish i did but i don't if you're ryan you know what i mean if you're not too bad so we're just waiting uh 210 c on the right or well if we're looking at this will be the left extruder currently and 160 on the other side which means it's going to start printing on this side first and we're going to do a print we're going to print a check model i'm still talking yes hey man i'm i'm actually rocking through this it's just taken a minute celsius and kilogram i'm sorry i must have said 500 kilograms so i'm at 500 grams spools i was being kind of the us oh man oh it's all good now everybody knows who ryan is you outed yourself by the way i love that that thing you sent me the other day i hope that's a real thing because i will print it and i'll probably make a video on it or a project of it because that will be awesome uh yeah it's big spools you know polymaker uh or i'm sorry not probably my snap maker snap maker is making giant spools now you know for your machine all right here we go do you guys i don't really want to move it i'll give you guys a good view of what's going on right here i want you to get the best view only the best for y'all so we'll crank that on here we go we're printing questions uh and i'm and and amenity is gone i can't even talk um let me know if you have questions so while we're doing that i'm gonna i'm gonna hit up snap maker i'm going to um give you some stats on the machine it's on pre-order right now for uh 1099 dollars the first layer is going down pretty good i would say really nice i'm gonna say really nice that's a fair thing to say um can i print nylon i don't know maybe i'm gonna see if i can i can't spin this thing how can i gotta be able to spin this i wanted to get you guys a closer look but the feet here are in the way of that happening all right there we go good enough all right so here we go um it is on pre-order for 1099 dollars um it is so uh let's see i lied nope that's right 1099 pre-order let me go over here retail is 1399 it looks like um orders will be shipped into eight to ten business days once confirmed expect uh delivery period is five weeks uh it talks about ultrafast speeds smoothing uh operate optimization cast machine parts linear rails uh intuitive software and user-centered designs it's refined and solid i can confirm it is super solid um this thing is built i mean quality wise it feels like it's built nice it looks really nice it looks like it could be a good old centerpiece you know of your house or your or your table it just looks great um first layer yes um there you go um what else oops of course i hit the wrong button all right never miss a sale no hey hey hey what's happening no get out of here this web page is going crazy it wants me to go to the um black friday sales there we go what else do we got dual material printing breakaway supports and dissolvable supports are effortless according to this copy a mirror mode double the productivity up to 300 millimeters a second printing speed in 10 thousand millimeters squared acceleration um something to note that acceleration is half half the bamboo lab printers but still fast that first layer looks really nice i'm going to throw it out there it's hard to see for for uh you guys i might be able to spin this thing this can give you a different view if you guys want to see it this way i don't know if that helps that big heads in the way not it doesn't help we'll go back to here we'll go back to here and then i'll fix this one more time there we go now it's throwing in uh the orange in the center there it's hard to see um i wouldn't print pc or nylon without a closer guess um it's first layer remember that this is just the first layer excuse me oh i just heard something it must have been something interesting the weird noise i don't know what it was rigidity of course um it talks about that it says you can do nylon reinforced nylon tpu carbon fiber it's got a five inch touchscreen i gotta say the screen is nice very reactive the screen looks very nice there was graphics on the screen um so that was cool it looks like they have some different printing modules for this thing you can do 0.2 0.4 0.6 0.8 and a hardened 0.4 you can do different filaments right now filaments are black and white in one kilogram and you can get them for 17.99 you can get a replacement glass for it um yeah so there's that now i was going to get to the um there's vibration compensation it says so there's that seamless extruder switching one piece die casting linear rails uh one second i'll get to the size of the plates i believe it's um trying to get down there it's going i just heard a fan i gotta tell you it's quiet quiet compared to the bamboo printers for sure super quiet there's a backup excuse me there's a backup mode that you can do um which is kind of cool so if one extruder like craps out or the runs out of filament maybe or whatever it actually kicks in the other extruder i like that that's cool sam um it looks like you can do um oh what just watch you sam covid yes i have updated firmware i hope i hope it's the right version we didn't even check because we didn't get that far yet it hasn't let me into the actual screen i've been going through the calibrations this whole time uh sam it looks like you could do abs and then tpu around it um we were talking about that recently it actually shows pictures of that being done 300 c hot ends i believe 100 c on the bed i believe that's what i saw um there's a five inch touchscreen like we talked about calibration was pretty simple i mean it took a minute but it's pretty simple um easily swap the hot ends which is cool you can just get full replacement hot ends with different size nozzles etc there's nozzle wipers um there's a top on there all right i'm trying to get down to it does not tell me come on i got all the way down to the bottom of the page what i was trying to find is i don't know if there's a graphic maybe there's a graphic there's not a graphic what i was trying to figure out is what each side could print meaning here we go so default and backup mode are 300 by 200 by 200 millimeters copy mode is 160 by 200 by 200 mirror mode is 150 by 200 by 200 just a heads up so there you go took a minute like the loud music how do you swap the heads um easily it says i haven't got there yet but we'll double check let me we'll check that out so far it's printing this this calibration really nice i have done a couple ideks um on the stream and this one i can confirm has i mean it's pretty dang spot on it's going decently fast ish so there's that i'm going to just let the other half know i'm still here okay any questions doing something it's done i think let me just see what does it say on the screen remaining time 12 minutes i lied it's not done it's not done now that i drowned myself she won't be she's not watching no let's see you still need a purge tower unless really really well tuned um i guess so i'm guessing that's what the circle is in the back of it but jeez i definitely drink uh i definitely swallowed the water in the wrong pipe all right it's the worst bench i've ever seen ha matchmaker space how you doing um sam yeah no comment uh that's a circle purge tower i believe so it's doing white on the outside orange on the inside of the purge here um let's see there's then oh there's nothing to purge yet it might be a prime tower oh it might be i think the updated firmware still on the usb desk you need to upgrade the firmware on the screen uh oh that will suck because that means i got to go through all of the calibrations again uh if that's the case um yeah prime tower is probably more likely because purge would actually be doing a lot more than that i think it wipes cools down wipes but you know that that's a good point we haven't seen we haven't got to a menu to see what the firmware is um so i don't know i don't know if it updated you know a lot of printers you just throw in um throw the bin on the sd card throw the sd card on turn the printer on and it updates this particular one i could be wrong could be wrong the wobbling is driving you crazy that's how we roll with this desk i didn't move it while it was printing here let's see oh that's that's how it works that's solid right there just genuine wobble wobble baby wobble baby let's see what i can do maybe that'll help a little bit i should get a piece of cardboard it is a pretty good um there's a pretty good gap there hey it looks like it's done ish i'm gonna spin the printer anyway so there's that so it said it had 12 minutes like a second ago and now it's all of a sudden done it appears 99 percent you can see what it does when it's done there you go nine seconds it says eight seconds i think the time is a little off says print time was an hour and one minute so maybe we are using wrong firmware we're gonna find out finally hopefully we can see the screen uh let me just go back here so this is what i got cooking i'm gonna turn this thing so i can look at the screen as well and maybe we can get rid of that wobble nope um get this out of the way just for a minute the model turned out really nice um i'll get it off in a second here i'm gonna touch the screen um if the surfaces are differently colored are flush with each other then it's good if not you need to calibrate do the calibration again i am going to have to go out on a limb and say this may be one of my best ideks first calibration models ever um if i can get you a good close view of that look at that i mean down to the little arrows that is pretty dang good let me know what you think in the chat but i think that's pretty solid pretty solid so i'm gonna hit next i'm gonna hit complete and we're done with the wizard okay we're good oops oh no we are on the wrong version of firmware very sad about this there's a firmware update i can download it but i already have it on the sd card so there's that there's new firmware update now 2.2.3 i'm at like one point something well we're doing it so i got to go through the whole calibration again but that being said they said don't use it without doing the firmware there was no instructions that you had to like bypass that calibration to get to the firmware stuff so that might be good to tell people or if there's a way to bypass that when you first turn this machine on for the first time but beef where's the beef start again all over one more time um let's see what happens it could be different now because they said to make sure the firmware was updated before i did anything and if i did calibration already i would have to redo it so um let's see local update well well that's not good i mean local updates all right it's updating it's doing its thing i can show you if you want you can dance if you want to you can leave your friends behind but if sam don't dance you know you don't dance there's no sam of mine all right it didn't seem painful it's not it's not that bad actually and i tell you what i would rather it take me 15 minutes to run through calibrations and get that calibration um that we see on the plate right now than to take me five minutes and have to calibrate it over and over until i get there right um john strand thank you so much i appreciate it you know i mean that's just being 100 honest i would rather take the time now when you're setting up this machine to calibrate maybe it's 15 minutes okay but it comes out so good like that um man i can tell you this once this thing is done updating we'll check and see what's different um i am gonna there is a multicolored print that they threw out on their site for me that's sliced already um i'm gonna drop that on first print i want to do it let it fly it might save i don't think so it told me uh the email said let me get down to the email here no comment on the ultimate your thing because i don't have one um let's see if you've done the calibration please make sure you calibrate the printer once again after you do the firmware upgrade fair i mean that's fair say we're complete good snapmaker well that was fast that was just a reboot but i'd tell you remember how long it took last time so we have control calibration settings um i just want to kind of go through the screen a little bit so you guys can see that because we haven't really had time i wish i could need to get this thing either out of the screen there we go see if we can get you a better it's really hard to show that screen it doesn't tilt and my gopro is like it is what it is okay up in the top across the top here tells you which oops which head you have a point four a point four which is awesome because it tells you which size the right and left nozzles are also tells you the temperatures the wi-fi is on um you can touch the screen to bring to the models oh there's a shark right there i was again that's the one i was going to do there's benches we can do benches there's uh let's see i have a belt calibrator we'll go back um we can do control let's see what that takes us oops there we go um so we can set heat and everything on each extruder it looks like we can move um up and down all the good stuff the heated bed we can set the heat there and it looks like to do the heat part baby shark yes um you dial it up like this you know so that's kind of cool i mean this screen is super super snappy it follows my finger really nice motors you can turn your motors on and off which is cool so if you want to do something with your uh your drive motors there you can turn them off and on you can go to settings see what firmware you're on um you can check your wi-fi you can go into the language about probably tells you all the stuff here a lot a lot of information there um there it looks like you can export some logs which is good machine settings terms and conditions okay so i mean so yeah there's that this touchscreen seems nice let me know um let me know what you think let me know what you think remove the here we go again i got to run through all this again so in the interest of time i'm going to show you while this thing is doing this whoo this plate is still a little bit warm so there's that um okay in the interest of time i'm going to show you this camera and let's see if you can see i mean for old firmware and that calibration time that's not bad what do you think i need i need a light up there i'm gonna work on that i'm gonna get a light above here too but um what do you think i mean i think that's pretty dang clean yes it took a minute to get there yes this thing takes a minute to heat up especially the bed but uh i can tell you i would rather take the time like i already said and calibrate now and have this result then to have to go artist d on it shame if you're still i have no idea shame's still here but the artist d turned into a nightmare um after my video and it wasn't great it was fine for a minute and then it turned into a nightmare um oh shame's still there baby shark yeah yeah so yeah i mean he knows so this thing is way far from that it's clean looks really good um shame yes the artist d is a pain so if i get this result i'll do this thing in calibrations right i'll set this where it's gonna live and i'll do the calibrations and i'll leave now what i'm really curious about is sam said when this thing gets rocking uh full speed that it gets rocking and i want to see that i want to see that happen um yes beefing it you're right and being pei this should pop off it did the top layers are not terrible everything's popping off which is really nice i'm gonna show you um a better close-up of the purge it's not really a purge here so this is the there we go wipe tower whatever you want to call that circle thing and that's what it kind of looked like goodbye now it's gone forever um and this is a little bit closer i mean it's pretty solid pretty solid i'm running through the calibrations now as fast as i can i'm gonna keep this little piece and i'm gonna print something big on this thing right away i don't know if i can pull i did it anyway so i just pulled out the um sd card because i have the i have the models that they approved on here i wonder if they're the same models though i just plugged it in front of my desk does have usb why i didn't put it on this side of my desk i don't know because i didn't run it here i should have all right here we go so let me delete um i'm gonna go out there and say the sd card is completely empty there's zero on this sd card just a heads up it's enclosed yeah i mean we can close this up there you go it looks nice it's quiet it's very quiet especially y'all know what i'm talking about if you have a bamboo printer you know it's kind of like phones right phones went from like little to really big and then now they're kind of going back little or fold again um printers went from really loud to very quiet to holy moly uh or i see what you're saying on this door just not sitting in there correctly probably um anyways it's you know that the bamboo printers are they're loud but they're fast so there's that um this one doesn't have an exhaust fan i don't see an exhaust fan no there's not an exhaust fan at all nope nope nope nope oops oh shoot i was supposed to clean the uh nozzles hopefully i hit next without doing that so we'll check them in a second i'm gonna get these models loaded up here that i grabbed um what do you think it is two color shark just knock that out right away i'm thinking extract it might already be on there but i don't know so we're just gonna put this um while while this is doing its thing um calibration failed um might be mad because there's something on the uh it might be a mad at me because i didn't clean the head there hang on let's try this again here all right start great move next great cheating back up next great clean the nozzles we are cleaning the nozzles you can't get any cleaner i'm hoping you don't have to do this with no um filament loaded because i could see that being an issue it's just it's just gonna because it's heating up it's gonna you know pull back you think maybe you could retract a little so it doesn't do that but we'll find out in a second it goes down and hits that back part oh there we go now it's going see how fast we can knock out this calibration boom that one's done go over there oh i shouldn't have messed with it there we go we're good there okay two color shark is on the drive i have not been looked i apologize i've not been looking at chat because i'm trying to do two things at once here uh-oh that was my camera okay paste i think there was a benchy too benchy test gcode benchy test gcode just in case you know we might as well paste okay i got all the newest models on the sd card now all right let's see restore machine i'm completely calibrated oh excessively calibrated got it yeah this calibration i guess it takes a minute but um you know we already went over that we got to get to something fast right that's what we're trying to do unfortunately we went through all this and the and it was not um calibrated oh it wants me to clean the nozzles again just to be safe not yet no build plate yet it'll tell me to put it on when we're ready okay go see what happens i thought it said we were good i was wrong print a poop shoot i could we go doing it's touching in the back great now it's gonna touch up front we already did this once we're good there at least this part's fast if you were just going next woohoo we gotta do the other side still remember go go go go i just want to see it print very fast if there will be more calibration next clean the heat bed surface for the install pads okay got it next calibration successful complete this one you actually have to go down the other one moved each item in a row um this one you have to go down the list with your finger you have to choose each calibration it looks like it the other one like made you run through it all this one this firmware at least um i think it was two did not do that it's it made me like touch the next one i could be wrong but i just had to touch it and i just want to run through this because when we get this thing rocking we want to make sure it's calibrated right and you guys i've been here forever we want to see this thing rock faster i wish it would not lose i wish you would not lose temperature between the calibrations all right the time is the giveaway what are you giving away today um oh so far set up pretty easy instructions decent calibration walks walks you through it all so if you're a first time user and you jumped on board with this thing um once you clean the nozzle always clean the nozzles because it uses them to do all the things okay there we go so you know it's it's pretty easy if you're a first time user i think you could easily walk through this part pretty fast um it's going to do its thing over here and then i think it's going to have the other side touch it too now i'm just doing this quickly just a little bit out right there pretty close pretty close so what we do is we calibrated this side we're calibrating that side now again this thing has pressure advance and resonance composition so the excels are probably legitimate maybe um oh yeah now we tighten this side up so this is probably the calibration like it's probably the worst part of the setup but it's probably also the best part of the setup because you want it to be calibrated nicely to do these dual color prints any multi-material prints really okay we're good there next complete go oops i think i think it wanted me to let me back out let's see current data get quit okay start it said the current bed temp is 50c we need to get it below next we already took that off we're just getting the temps back up again it's going to do the the calibration in the center while that's doing that i'm going to look at chat for a minute having a hard time having a hard time and he knows what he's doing he still needs help didn't come in from the start but uh it's not hard to put together we're just following basically we're just following stuff on the screen right now i did it one time already unfortunately i thought the firmware updated itself it didn't so now i have to recalibrate it um so there's that so we're just redoing that i'm trying to go fast as i can because we've been here for a while and we're just we just want to see this thing print fast right um clean the nozzles we're always with this cleaning the nozzles i mean i i get it it's a it's a very important part of the calibration because the nozzle needs to touch it's doing its thing now again i'm putting a new battery in this all right um not really having an issue it's just taking a minute and i and i want to hurry up and i want to get something good happening before we shut down the stream i'm supposed to be out of here maybe like 30 minutes ago but i chatted my wife and i said we're still here because i thought oh this thing's gonna be set up quick we're gonna be going quick and it primarily does the problem we have is i have to redo this quick to get a fast print going the the calibration include resonance combination increasing vibrations or is it in the manual none of the above yet so there's that it hasn't i mean nothing on the screen has told me anything about that that answers your question x y z offset okay they've been calibrated great next complete so it wants me to do another one of those um calibration checks there is a vibration calibration down here i see it it's in the screen now to improve printing quality you can turn this on let's see what it does here i'll give you guys a better view now that i just did this so i found it in the screen i didn't see that in the last one i could have missed it but i'm pretty sure it did not have it in the last one and now someone was just mentioning this i see it beef ingot there you go um i had to redo all of the calibrations which if i'm rocking through them they're not bad uh and if i'm paying attention uh the current bed temp is here okay wait wait wait it wants me to load the fill oh i see it wants me to put the bed back on and load filament but it also wanted me to wait till i got a certain temperature as you can see i'm not doing that print go all right here we go doing something we'll get you up in there now this was the vibration compensation calibration test thingy that it wanted me to do so we'll see what happens they're both on it did not do the little control panel pad thingy majigger that we did before it wanted me to i skipped that and went to the vibration thing i didn't do this again yet all right it says it's heating up okay almost to temp um the nozzle at least we got a little bit to go on the bed so while we're waiting jim link super sticker 199 thank you so much man thank you so much yeah it's actually not too bad to do it's it's pretty quick to set up and go i would suggest somehow if you can bypass the initial calibration when you get yours if you get one and update the firmware right away do that firmware took a couple minutes to update it wasn't along at all and what took so long is that we went through this whole process and have to do it again um they warned me that that but i apparently my theory was dropped the bin file on the sd card put the sd card in turn the printer on but that's not how it's updated so there you go we're just waiting for when you're just waiting for um the bed now to get back up to temp and we'll see what this thing is going to do hopefully it does something cool because this is supposed to be the vibration compensation test thing uh questions let's do some questions while we're doing this i i can't be on here maybe like 30 more minutes tops so um let's if you have any questions at all let me know here's a calibration card oh interesting calibration card is basically a mini ruler oh you're not saying that it's a mini ruler on the back of this little card interesting interesting okay uh we are five degrees from rock and roll five degrees not 98 degrees five degrees um i don't see any harden nozzles on their store there is i did i did see that um if you go to the printer itself and go to features and let's see at the top right frequently bought together if you scroll down under that i can shoot the um here is the link boom boom there's a link top right you can get 0.2 0.4 the hot ends look like you get two of them for 99 bucks 0.2 0.4 0.6 and a harden 0.4 oh here we go we're doing something let me get you a better look huh here we go it looks like it's only going to use one side on this um it definitely is only going to use one side it's supposed to be 15 minutes tops here what it says well printers up next that's a great question um i have a few i have a few i need to get done so you never know i heard the fans just kick in so it's doing something i'm thinking we might see some speed we might see some speed we'll see maybe not time for a trip to the eye doctor beef funny i feel like i'm blind i don't see this um any questions any questions i have all this stuff in front of me all the tools that came with um they did have it did have a sweet tweezers um little grabbers yeah kind of cool very nice little toolkit they give you maybe because it's canadian a benchy no it's not a benchy do i have a link to the hardened nozzles i don't let me see yeah i do here you go i can i can make oops i need my keyboard escape escape here you go i can hook you up with that uh it came with 500 gram schools not full size half the full size half a kilogram is it wetter uh underwater if you're there when it rains absolutely wetter the better that's what i say what's your favorite desk accessory oh man i knew i shouldn't have uh opened that door right um it's in the options yes yes yes yes it looks like the whole module um you get the whole module there you get two of them i believe each for a hundred bucks so 50 bucks a piece if i'm seeing this correct let's see yeah point two times two so it looks like you get two of them uh for a hundred bucks which is 50 bucks a piece so it's it's going through its thing right now looks like it's about 20 percent almost done um pretty much base mode is what it's doing right now so yeah go go go pretty steep price for two modules 50 bucks each i mean let's talk about what we do know let's see um did you align yes i hope so let me think about this let's let's talk about what we do know this machine is solid it's i mean it's super solid machine it's heavy the calibration while it is slow kind of um if you update your firmware before you do it you want to do it twice but the question i have is every time they have a firmware update will you have to do that again and again and again um that's a good question right i mean it's not a bad thing to calibrate your printer but that that process takes 15 minutes or so um it is solid so fast it's been good it's quiet quiet i mean it's it's going now um let me see if i get mic up here and be quiet a minute you can see here yeah so oh yeah if you change the head you'll definitely want to recalibrate so if you drop point two or six or eight or whatever um you definitely want to recalibrate and i get it you i mean it's very smart on an idex machine to keep them calibrated um you gotta keep them calibrated anyways um so you definitely want to do that it's definitely going a little faster now it's definitely quieter than my x1 it's quieter than all three of my x1 carbons and it's quieter than my p1p and that's fair i will call it out and it is definitely quieter than those machines um oh hot ends are directly uh sized the titanium nozzle size pro pro i can't even say that word programmatically next firmware update will let you to manually override it to the left and right hot ends are mirrored for idex reasons so it's not interchangeable got it um that is funny funny funny um yeah very thorough it was it was very thorough it walks you through what you need to do um in this firmware it actually um oh it's not using that one that's why in this firmware it actually uh you you know you touch on your way down to calibrating it the last one kind of walked you through it maybe i missed something but that's how it looked um only one side part cooling it looks like it yes yes it's only coming from that uh left side as you're looking at it now here we go i would i mean it's definitely quiet or i bet if i shut these doors and well with pl a you're supposed to keep the top open so um if i shut the doors though and put the top on it will probably be much quieter even um i don't know what it's running at currently it says it can do i think it's 300 um speed and 10 000 squared excel um it does not look particularly fast right now you're right we're just rocking through this calibration it looks like we're almost done 50 percent here um and then we're going to drop on something fun like i think it was a what the heck was it a dragon or a i can't even remember let's go look a two colored shark let's do a two colored shark or a moai you guys uh you guys tell me you want to see you want to see dual benches i'm probably not going to let this finish i'm just going to give you a heads up i i don't have enough time to stay on stream for all of the whole thing but we could do um a moai let's do a moai or two color shark moai or two color shark or dual benches printing at the same time moai shark benches vote right now i don't know the answer to that molusk yeah i'm gonna cut my hair to a mullet now dual benchy something two colored that's what i'm thinking too something two color shark shark i got a lot of shark here going on the benches i will do too i i'm going to do those as a test because you have to right um let's see the idex that's what i'm thinking too um the what was sam saying the dual benchy was the shaker yeah i bet it was i'm gonna do it as well but everybody there's a lot of shark going on here a lot of shark dual benchy dual benchy dual benchy so i'm guessing the benchy is gonna show the speed of this thing um and it'll show two at one time the shark will be pretty sweet to throw on and let it fly and see how long it takes and all that um what i should do do it as a short i will i'm gonna do the dual benchy as a short i'm gonna do the shark because i can let it run and and go do the other things i need to do the other cool thing is what i should do as well is um get a benchy going and like do it side by side with the the p1p or something and and just see my table might not survive my my desk might not survive if i put them both on here but um there's a lot of shark i'm gonna do the shark the shark eating two benches yes yes so what do you think this stream has been uh quite a bit almost three hours two hours 40 minutes a lot of that has been talking set up give yourself a good 30 minutes to 40 minutes to get it unboxed and fully set up it doesn't it's not that bad it's not bad is what it sounds it's just you got a screw in the side panels you got screw in the doors pull all the foam out you could probably really do it in 20 minutes if you were rocking and rolling and and now that you've seen it um hearing protection absolutely eastern island moa i will do that too i'm gonna do all of them i just wanted to know what i should start i'm gonna start the shark because we had more sharks but anyways um so that went pretty well then then we went through calibration and i had to recalibrate that's why we're so far behind here and um now we are where we are so yeah gotta run nice build man thank you nice nice to see you thank you so much for the uh five dollars offset maker lab i so look forward to those files i don't know if you're still here but if that's a real thing and and what you sent me is real let me know i want to build that um and i want to yeah i want to make that happen so um yeah let me know drop me a line you know how to get a hold of me um hearing protection so this thing's cruising i mean it's it's rocking and rolling and the print looks really nice it's face mode but it looks nice so there's that a fun part is putting it together why do people want fast cracks open a beer and go um you know i i don't mind the build either to be 100 honest i like building things now when i'm doing streams it's a little bit difficult because you want to get to the good stuff on the stream um ice thanks ryan um i i don't mind a good build either i have not done a voron yet i don't know if i'm up to that many hours of a build um but you know putting stuff together gets you to know the printer a little bit and i don't mind that uh hearing protection comment follows the race yes i doubt this can print pl a very fast not enough park cooling you don't know i mean you saw that it's essentially half the half as fast as the bamboo lab at 10 thousand millimeter squared they don't have the big fan in the side like the x1 carbon or the p1p option or the x1 you can add it to um we'll see i mean the only way we're going to be able to tell is is to do all these prints and see how it goes it does look i look like a pretty good sized fan that's blowing in we'll just have to see um what are the nozzles cleaner what is a nozzle cleaner made of it's a wire brush um the fun is about the stuff you make with the printer so having a printer where you don't have to um fast oh i see what you're saying what stuff lets you print fast there you go that's that's that's what that's what beef says there you go there's so much cool stuff in the i mean there's there's so many different variations of of what people like in the community right people love the long build people love the long you know a good setup people want the fast printing people want the fast setup and the fast printing and it really is just personal preference it is officially done i need to let this thing cool down for a minute because well i'm sure the glass is hot the screen says fast yes there you go um 100 i really like the interface i like the interface on the screen it's nice and clean um i do like that choose the best now it wants me to do something let me show you what this wants me to do here uh maybe so ah he can hardly see that i'm sorry so it says it wants me to choose the best area um choose the best marked area as illustrated by on the x and y sides of the model find the one with the most unobvious vertical ripples on each side okay so imagine i'm not going to be able to oh i am going to be able to take that off so it wants me to look at the model which is going to be hard for you guys to see and choose which one has uh the the least i'm sorry the most unobvious vertical ripples on each side of x and each side of y so i'm going to take this over here for a minute because i can't see so this is part of the calibration we were talking about um this has a little y here and an x here and the least number of vibration is the very first layer here i'll show you what what that means or what they're trying to go for here let's see if you can see this um it's gonna be super kind of hard to see but maybe i can show you up here maybe this will be better oh that's kind of better um so i want you to look at the basically the skin of the print right and figure out where the least vibration is yeah white white is definitely the worst for showing defects and it doesn't help but i can see them in person um so the least amount of vibration to me is gotta be the first layer on x and man one two three layers up on y that's what i'm gonna see so let's see what it wants us to do for the y model okay it wants you to choose which one so it actually is is going through this is important because this thing is really good at walking you through all the steps choose the one on the y model you can touch which one you want i think to my eye and it's so it's close but i think that one right there so we'll go next now it wants you to do the same on x and it's gotta be the bottom one on x there you go and there's no more now i did not check the offset calibration again i did not run that but we're gonna go for it um we're just gonna we're just gonna let this thing fly um usb we're gonna go shark we're gonna go start and pray that the offset is correct um because i want to see this thing print is this PLA i better be peeling so there's an adjust button you want to see you probably want to see what the menu looks like right let me see if i can get y'all up in there so there's the menu a little bit kind of there we go so there's a percentage how long it should take our in 38 minutes the temperatures and adjust there is a speed button there so we're going to check that out that is right over here so we'll play with that there's a fan left and right fan percentage and default mode is on whatever that means you can it's hard to see but it says way up there default mode and then there's also a speedometer interesting interesting so five dollars super sticker thank you so much gunner gunner thank you so much thanks for all this content thank you so much thought they would have an accelerometer maybe i don't know what they got we're gonna find out in right now oh it's printing that was fast it was almost heated up though so there's that oh jeez let me get you a good view here again weird views all right there you go we are now printing i'm really hoping this thing goes to shakedown baby all right i'm gonna let this go for a couple layers we got maybe 10 minutes so any questions that you guys have on this printer any comments um let me know and we're gonna see i did not rerun that offset calibration i don't know if that's a good decision or not well i didn't rerun it probably should have but i'm trusting i'm trusting we're close shake that shark yeah yeah thank you so much again um gunner for the five dollar super sticker i appreciate that sam it's me wake up this is uh you know your alarm clock no i figured sam fell asleep by now it took so long here we go i'm pumped i'm pumped to see what these this flexi shark looks like in multiple colors what i should probably do is is do the same shark find it out there wherever they got this model from and do the same shark in two colors on one of the other printers and yeah can it report the chamber temp i have no idea let me look um i don't see a chamber temp i want to know what default mode means oh you know that little speedometer i thought we could adjust something oh you can you can you can so the um speedometer is currently showing me there you go there's your wipe tower in the back there um the the speedometer is currently showing me what speed it's printing at now with just 35 millimeters a second and it changes uh as it's printing which is kind of crazy um i can show you this because i think you know why not um let me i'm gonna try to get you it's close as look as i can here i wish i could turn this i can't that sucks okay it's just doing printing things over there so let me see if you can see that it's so hard to see 36 now 35 let me know if you in the chat can you guys see that decently it dropped to 12 now it's it's filling in some stuff um it is the first catfish thank you so much it is the first um layer so it's going to be slower but hopefully you guys can see it does it use a custom slicer i believe they use sound like lumen slicer to be honest they said it wasn't ready yet but you can use a plugin for kira it says so i want to do this hit the adjust button you can adjust temps um for each one you can adjust your bed the z offset that work speed flow rate and fan speed it looks like there you go we're on the first layer so we don't want to mess with too much there but an interesting um an interesting thing now yeah they said um lumen 4.5 is not released yet i put that's what they said so that's all i know so i'm going to bring you back up to the top here i'm going to open this up here bring you back up to the top and get you all up in there for there yeah no i don't like it there we go now we can get you all up in there let me just get you straight though i have a feeling that this thing starts shaking it's not going to matter where i put y'all because the camera is going to be all crazy okay there we go yeah it's not maker slicer with printing lasers etc okay cool i have not used it yet so there's that i don't think so it's going now with the orange um notice i believe all the color changing and all that stuff went away after i got rid of obs and um no as after i rebooted the uh item mini is why okay so now we got orange it looks like it's in all the right places so far so i'm going to go on a limb and say it looks like we're calibrated there um fans just kicked up a little bit and here we go see if i can hold this camera still so we just kicked up to 119 30 119 119 120 what's really cool is it's actually showing you how fast i might not be able to keep this camera here like this um too much because it's it's rocking now it's doing the orange layers let's see if i can get y'all up in there there we go look at that whoo here comes here comes the second one whoa now we're cruising look at that i'm hoping they give you a version to use for this that doesn't cost anything right that's that's the hope i could say you could tell this thing is really quiet and it is flying what are we at here we're at 190 154 104 so it's really cool that it shows you um it's kind of hard to get it in there well you can see it's flying let me let me go back here let me get a couple minutes uh before i got a bail i i do have some plans that i have been ignoring um if i can slide this thing over i probably shouldn't do this but i'm gonna anyway do this hopefully that doesn't screw anything up it is not vibrating it's it's way quieter than i thought it was going to be but now you can see the table shaking um but that's anything anytime you get something crazy fast you're going to get vibrations right so this is how it looks with the doors closed on the front those reflections suck so i'll keep them open for now and let's see what this looks like okay you give you an idea of a top down view um a little bit of a top down view there it's wanting to zoom in on of course it's wanting to zoom in on the extruder but you get the idea yeah yeah based on the state of spears appears at the hot inflow limit as the state speeds are uh at point four yeah he has a mannequin to attend to yes i do that's pretty cool though i mean it's rocking and rolling now um in i think this is only like an hour and a half it's not gonna take long let's see what the time is so it looks like an hour and 30 minutes i think it was an hour and 40 when we started or something like that hour 45 maybe it did put down a raft as we saw um so there is that so you know there's a raft which is fine um i want to see this thing printing at its max speed i do too but i also want this shark to look good so we see how it comes out of the box i will i promise i will print something great and turn the speed up i don't know you know i don't know this is their slice they slice this it's their file so i'm sure they have it tweaked to go pretty quick here the cool thing is um unlike the x1 maybe you don't the ams has to retract and start new filament every time and an idex you don't have that you only get two colors but as you see right now it's swapped boom now it's on the next color so it's gonna be fast for multicolor stuff for two colors two colors um i don't know the answer to this what they recommend i mean i can go look in their manual i think they do have some stuff in the manual let me pull that up here um let's see if we can find it real quick there was a bunch of filament stuff in the manual as far as um Jesus thing is shaking oh man um PLA what they say PLA oh it's pva man this thing is rocking my desk tpu95 tpu95 sounds familiar um easily stripped PLA whatever that means PLA here we go PLA what they say is 100 to 200 millimeters a second print speed on their documentation here um and what i'm looking at is the manual that comes with it has this oops has this um page you know and you can go through there's a whole bunch of stuff and you can kind of find out different things and here's your PLA the diameter the melt the tensile strengths um the recommended print temps the bed temp um yeah so what they say in this documentation is um 100 to 200 millimeters a second hopefully that helps um can we overhead of this printing would like to see it down the chamber sure there you go you can see how much it's rocking now it probably doesn't help that the camera is moving there we go uh yeah 1099 us dollars presale right now cool give a link to the shark model i'm curious um i don't i can find it or i might be able to find it they didn't call it out like the maker or anything i don't think so uh or maybe they did on the page give me a second let me look let's go look let's go look um yes i do i do i do i do nailed it they put a link in their documentation to um there you go it's uh it's a magai beer model it's free which is good here you go here's your link all right no problem for the top view i just shot you a link uh i shot out there a link to the colts 3d um model i um that is where magai beer keeps that model he also does some sweet articulating dragons etc all right guys i gotta get going it is a 305 thank you again for all the donations i really appreciate everybody and the support um let me know what you think i know this was a long three hour stream but we calibrated it twice within that time period um you there is led lights are super bright right here by the way you can kind of see them um anyway is this thing's rocking i'm really excited to see what this shark turns out to be in the end um don't forget if you do have one of these coming do what you can to upgrade that firmware first before you go through all of those calibrations i'm i'm hoping you could skip the calibration in the very beginning somehow upgrade the firmware and then do the calibrations it'll save you at least 15 20 minutes um how big is the build play 200 by 200 by 300 um if you're printing like the full size that's how big it is if it's uh and it kind of shrinks depending on what you're doing after that um it's shaking like a crack head maybe um thanks allison 3d as well um uh let's see awesome stream thank you so much filament on fire i think you said you ordered one i hope you like it i'm super pumped to check this thing out i might turn this thing back sideways so it doesn't shake this desk as bad and i'm going to move it um eventually because this this this desk is uh obviously wobbly being a sit stand desk and it's a little bit crazy right now um but nothing nothing i mean on this model it's very similar to the bamboo um bye jim bye sam um yeah the it's so expensive what you guys are talking about the xl it's it's going to be an awesome machine but definitely definitely pricey i couldn't do it um you're welcome for the stream everybody i really appreciate everybody being here i got to get going thank you guys so much uh this is a snap maker j1 first uh video that i could find out there and i think what we'll probably do is put together a more condensed video coming up as well i'm going to print a bunch of stuff off and then we'll put that together in the next week here um maybe two so hopefully you guys liked it um don't forget you can always ask questions when um the video's done and posted shoot them into the comments and i should see them joseph 999 thank you so much man a last minute donation i really appreciate that joseph thank you so much um everybody out there thank you everybody else love you too sam can't wait for you to go to church tomorrow um if you know what i'm saying there um let's see thanks for the stream have a good one thank you guys but thank you guys like i said after this is done and it posts hit me with the questions if you guys think about them afterwards i'll check them out uh so far so far finally printing something solid the test prints we did came out really nice um but it's it's all going to be like proof in the pudding right we need to see the models um you know i'm going to throw the three tests they gave us the shark the moai and the benches at this thing and then we're going to go crazy with it hopefully they'll have a slicer for me soon otherwise we'll have to use kira and the plug-in so um three dollar super sticker john stern thank you so much man thank you thank you thank you um would rather have four bamboo labs too expensive yeah are you talking about the excel still so there's that thank you everybody have a great rest of your weekend and um we shall talk um i don't see a way to dm you oh john don't see a way to dm you hit up john on maybe twitter or something give the end give the end of pinch yes we're doing it see you later guys have a good night we uh look forward to some shorts coming up soon i'm gonna post some shorts and i'm not talking about the ones i'm wearing so bye guys