 what's up everybody welcome to the live stream this is the edge of tech I apologize I am two minutes late because I was like looking at the printer figuring out where everything goes look down at the time and I'm like oh man it is two minutes after I apologize for that man Dan I hope you're okay did the table stand up well it's still here we'll say that it's still here thanks for the 3d printer hunting guy one two three no problem everybody's giving me a hard time in chat that's awesome hopefully you guys can hear me okay and we are going who adds I forgot about ads we'll give you a minute we'll give you a minute for ads let everybody jump in shake that desk all right I'm gonna do my best to watch the stream yard chat so I can pop them out today I don't plan on making this a super long stream just as long as it needs to be and go over some really cool stuff so people are starting to come in I know there's ads before this one so it's gonna take a minute for everybody to jump in it's going great works stream good good good work stream good hopefully hopefully everything's good you guys can hear me okay right perfect perfect so we got you guys rocking and rolling we got a brand new printer we a bunch of us brought it out yesterday the bamboo lab P1P if you didn't see that live stream we had a blast we opened it up we checked it out we talked about some new information which was it is confirmed black Friday so two days from now the 25th of November at 12 a.m. eastern this will go on sale the real San Prentice a super sticker thank you dancing taco for you I don't even know where the dancing taco came from I just liked it you have an echo from all the streams I hope I hope it's not echoing what's up Matt looks like you've been printing parts for the side panel I can't confirm or deny that yet but your eye is a stoop so here's the thing there was a blog post that went out today I'm gonna start right away with this a blog post went out today I am going to share that quickly because it's got some very important information and I want to get it out there right away in the beginning of the stream because it's like breaking news if you didn't see this blog post it's out there it's on their site it's it's public information and I'm gonna bring it in here we're just gonna make it like the full screen real quick and if I can get my cursor back over to that monitor here we go so they put this out Black Friday pre-orders 25th 12 a.m. Eastern it's gonna go on pre-order according to this post they have a few thousand P1Ps already manufactured and shipped out on their way to the distribution points the way I understand this is just like they did before they have a distribution point they send everything out to those distribution points and then they ship to individuals from there so I'm assuming there's a few thousand heading out to distribution points I know bamboo lab is in the chat and also behind the scenes talking to me on another social platform well discord and so they can correct me on anything I'm wrong here but according to this a few thousand will be or have already been shipped out and ready for the pre-order they're on the boat assuming they're on the boat on their way okay there is basically they're doing this and they're gonna open up the pre-order so it shortens that time between the time you pre-order and the time that you get your printer it is pay-and-full up front and you need to do that this time but if you cancel anytime before it ships you'll get a full refund so there you go there you go the biggest news I saw out of this and this this talks about a lot of things it talks about the X1 X1 Carbon their delivery times and you know how people got and get with that there's still people pre-ordering and waiting for them and stuff like that and people get a little anxious you put some money out there and you don't know and they want to cut that down the biggest thing I want to point out there are almost a hundred people already in here and the biggest thing I want to point out this right here this paragraph right here they are still a small company they really appreciate everything we're doing for them they're a startup and the pre-orders help us ramp up factory and finance stocks until we can reach our cruising speeds so with the first batch right here they are going to include what you are going to see today this is a cooling fan a camera and the LED light that you're going to see today in this video is going to be included with the first batch what that means is that our suspicions are confirmed this box right here should come with the first batch of printers this has an LED it has the cooling fan and it has the camera it is a low-rate 1287 1280 by 720 camera so it's not the 1080p one we saw in the X1 X1 carbon but it is a camera and they're sending to us for free thank you so much Sam I really appreciate the super sticker I'm gonna put them all over my desk all over all the stickers all over my desk but this box here should be included and correct me if I'm wrong K I know you're watching should be included according to this in the first batch that means if you order on Friday or soon after as long as you get in the first pre-order then they're going to include this box not going forward after that but for the first batch also I better check I see that they're chatting me I hope I'm saying this correctly good okay so also we get back over there there we go maybe oh figures there we go also once they sell out of the first batch they will not have according to this it'll be limited it'll be a pre-order so sign up obviously go to the website sign up make sure you're notified all that good stuff but you will get the cool stuff the camera the fan and the LED that you're gonna see today if you get in on that first batch which is awesome because that's it you know it's a good good little bonus there but the other cool thing that they're gonna do is if you scroll back up here it says right here in order to give a solid ETA to our customers the pre-order will be limited the exact amount of printers that are shipped out already once they're sold the P1P will be out of stock until the next batch is fully made and shipped out again this should cut down the times that takes from your you know from your prepayment to getting the printer drastically because we'll just keep them out of stock there's no you know people have been waiting a couple months for pre-orders stuff like that they're gonna try to cut that down I love that I love that bamboo is listening and and watching the community because I know in other pre-orders maybe that you put in last year you might see them end of next year not naming names but it's possible so I love that bamboo is like you know what we're gonna sell what we have use that money for all the manufacturing and all the good stuff build the next batch and then sell those we're not gonna keep taking pre-orders so we have a six month backup I love that and hopefully that's good I don't know the shipping cost we'll find out Friday I don't know that they can tell me that yet if they can though they'll let me know behind the scenes and I'll tell you bamboo is probably the best company that I've seen listen to their customers I would have to agree I would have to agree Dan I can't confirm or deny what you said holy smokes you have a link yeah of course I have a link you want to link we get you a link man maybe right after I put my keyboard down there let me do this I'm gonna hook you up with a link I'm gonna hook you up with a link to to the sign-up page right now boom shaka laka what's going on here 3d puck 10 thank you so much I really appreciate that that is a 10 was it $10 super sticker is that Euro I'm terrible with the little symbols I appreciate that thank you thank you so yeah catching up from yesterday awesome Don I apologize I'm trying to keep up a chat it's a little bit crazy I might have to pull up my I might have to pop out my other chat so I can see more but here's the thing we just found out they are going live the 25th which is Black Friday at 12 a.m. Eastern jump in they have a few thousand around the world around the world and Sam thank you so much show my sides I don't know is there something wrong with them I mean my profile do I need to my prison profile I'm joking I don't have one but anyways paid flexing I love it I love it pounds thank you anyways so you'll get the box with the first thing there's a few thousand around the world once they sell out they're done until they get the next batch made and sent out that's awesome I appreciate that bamboo awesome we're gonna jump into the upgrades have an X1 already debating if I should get an X1 or trying out the P1P Patrick if you're gonna do PLA PETG you know some flexibles stuff that doesn't require an enclosure this is solid if you want an enclosure you can make one these may or may not be sides for one but you can make one or you can if you're gonna do like the basic filaments this is gonna be a monster this will be a monster in in probably a lot of print farms for the price I believe it's like a hundred bucks cheaper than MK3s and it's assembled and ready to go in like 15 minutes once you get out of the box you don't have to put it together so there's that and I'm only you know only talking about the Prusa because that's the closest in price with this good of value now there's a ton of other printers out there and in the chat let me know before I get going what you think 699 is the pre-order price on this I don't know what shipping is I don't know if they can tell us what shipping is or it's gonna be by country etc but they'll let me know if they can but 699 that's the pre-order price and if you think about it what other printer what other printer with your reputation of the company and the other two models they have could you get that has a 256 by 256 by 256 bill volume and it is stupid fast enough probably to shake this table to death what's that on Jim's arms what's that oh yeah Sam always wants to see my skin it's always about the tattoo Sam let's see price is good 599 you know it's hard it's hard because there's the balance right the balance of they want to get into the the medium price range market will call it maybe low to medium but they got to make money because if they don't make money they can't keep making these awesome printers for us hopefully next is an XL we're all hoping that I know you're watching bamboo we're all hoping the monsters coming next we'll find out and and we don't we're not sure on shipping I can't comment on that on that time but I can tell you they're gonna check on that tonight stay tuned for an update on that but for 699 yeah I don't know another printer that for 699 would would touch this closed source tied to a cloud it's not tied to a cloud at all this one I registered finally after the stream last night I didn't register during the stream you don't have to register this thing you do anything it's just then you just use the SD card it sits right in the top here you pop it in you use your slicer throw your print on your card or your card in which I just want to point out something that I didn't know this is a thank you so much try pot grudge $5 this is a 32 gig SD card by the way I popped it in last night and and checked it out it sits right in the top right up here and I can show that a little better right there boom it sits right here has a nice little push you know it's easy in easy out there you go 32 gig card you're not tied to the cloud you don't have to use the cloud you can use an SD card and it's fine now if you use the cloud you get sweet stuff like the slicer being able to send stuff directly from it checking out a checking out the camera let me show you what that looks like let me jump over here I'm gonna let me let me share this over here there we go let me just share this screen really quick with you so if you haven't seen this yet I stopped my comments I'm gonna catch up in a second here I just I stopped them from refreshing so I could see better if you have not seen this yet this is the bamboo bamboo lab studio you can go over here devices you can see all of mine I have Trinity we have popped on the other screen naturally I don't think I can change that I have Neo Morpheus Trinity and Agent Smith so I know that Trinity is printing currently I can jump in here I can hit play let's see what it's doing oh there we go it's rocking and rolling it is it is cruising there probably a little weird and laggy because I'm streaming at the same time but then I could shut that off oh you want to see what what Neo's doing and I apologize the the menus popping up on my other screen but that's okay Neo okay great let me let me let me jump over to Neo here you go boom Neo is printing that piece right there currently a little bit crazy I don't know if Morpheus is doing anything right now oh yeah it is yeah it is Morpheus is rocking and rolling right here oh looks like it's done good good oh you want to see look hang on I'll control it right from the screen and we'll pop that up I had this thing flying I'm trying to get it finished for the stream I'll go get that in a minute but the bottom line is you can do all this stuff you can slice it you can prepare it shoot it right to your printers right from here and I love that I love being able to do that I love being able to jump onto my phone anywhere I'm at and look at my printers printing and that is the reason I'm installing the camera today because I was running this last night and I was having like withdrawal not being able to watch it let's see sweet wonder how long it's gonna take the pre-orders they're saying in that article that they put today they're hoping to start shipping from the distribution points in early 2023 I believe January or February correct me if I'm wrong on that bamboo or I know Kay is hiding in the background and they they're awesome they're like hey we're here for you we're gonna be watching your stream if you have any questions just ask we'll answer stuff like that so thank you for that price is insane yes enjoying the show can't wait to see the upgrades we're getting into that right now thank you so much again tripod's garage first Long Island I see on me let's see that table shake yeah oh man I got I'm gonna flamingo stand on one leg and then I'll have like three or four Long Islands and we'll see what happened man yeah there you go it's hard to compare against Kickstarter because the Kickstarter Georgia not doing a Kickstarter this time they don't have to I mean they didn't have to the first time but it got them crazy marketing and that's what they needed I mean those of us that have it probably no and they love this thing I would see the table shake is part of the reviews yes here's another Long Island in case in case that's funny can you hot can you high upgrade to the high-resolution screen with the P1P I don't know the answer to that but I will tell you this after using this thing now since since last night since you know five o'clock when we started the unboxing I actually like the screen a lot compared to most of the other printers I see it the contrast is really nice the information is there if it throws an error it actually shows it on the home screen and I like the screen a lot I don't think I would I don't think I would upgrade this myself now another thing about me I use the app or or the slicer 99% of the time I don't ever touch the screen so there's that I like them yeah Neo is that a creality printer no no it's a matrix it's a matrix character Neo Trinity Morpheus and this one affectionately now known as agent Smith it's different than the others ha had to go agent Smith agent Smith all right 140 people here thank you so much we're gonna rock and roll with these been up all night waiting for this I bet can you ask about the X1 status shipping David I do believe they're doing their best to knock those out okay I don't know if you have any update on the X1 carbon status of shipping for pre-orders but if you do shoot it down there and I'll update everybody loved up yesterday's thank you so much ordered X1 see it said two weeks lead I did have the Kickstarter and love the X1 see awesome all right we're gonna rock and roll let's see Kickstarter could big word could have been a disaster you would have lost your cash risk war that's true this is true but it wasn't and not only it wasn't they outperformed and overperformed and like delivered early on shipping or delivered on shipping out of the country after their country you know on time I mean you got to look at this is probably one of the best kick starters that I've been a part of as far as their communication it was they had so much good communication from them that the team the CEO Dr. Turbo everybody so there's that what air did I have yesterday one of the resonance was out I'm gonna rerun the calibration I'm I was printing it just said keep printing I did and it came out fine as you can see but I moved the printer slightly and I think I did it so I while it was printing I shifted the printer and I didn't think I don't think it like that I'm trying to catch up trying to catch up agent Smith thank you Dan Torres agree Kickstarter was one of the best experience I've had with any Kickstarter I agree I agree I mean Sam might might get one someday I know Sam's here alright here we go we're gonna rock and roll on these upgrades so I hear printers finishing in the other room it shoots you a notification it hits your phone it tells you hey we're done or if you have spaghetti one of my prints failed overnight and it was one a set of these on the next one carbon and what happened is one of these towers came loose and when it came loose it knocked the front off and remember this is magnetic this whole front cover is magnetic it it knocked that front off the X1 carbon immediately stopped the printer shot me a notification on my phone saying hey the front cover came off we pause the printer you know fix it and then resume which I love I love the fact that there is a sensor in the cover that if it knocks it off and whatever it stops it there's a spaghetti sensor that detects spaghetti if you have a camera so the X1 carbons and this one soon hopefully and if it sees spaghetti it'll warn you and you can tell it hey stop printing if you see spaghetti and then if you can look at it you can determine to keep going or not you don't waste a whole school come back the next day and you know you're missing they're shipping the first batch I that's what the article says yes yeah so you know the thing is they had so much already ready to go they had their line the robot everything everything ready and that's why they were successful alright let's see thank you guys all for the donations I see that I do have a notification down here let me make minimize this let's see very early January is what they're saying P1 very early January X1 after let's see let's see P1 very early January X1 after receiving the email from us saying the order is ready maybe okay so on the X1 or X1 carbon I believe whatever ones you preordered after receiving the email saying that it's ready then you'll it will be shipped out within three days is what I'm being told so when they're ready they'll let you know and it'll be shipped out within three days okay what's under Jim's desk a lot of stuff let's see so it'll be happy new year yes pressure advanced calibration yes it does not have lidar so it has vibration pressure advanced all the good stuff just like the X1 did but not lidar not lidar okay here we go in this box we got some stuffs I showed these yesterday on the stream let me do this we get a different camera up here so maybe we can see this a little better there we go so this is an LED strip that comes with it it is literally a PCB with a plug and you print the part that this sits in so they provide the the file and then you print it that's the light we're gonna do that the camera that's on the hot end it's not on hot end it's on the side and on this particular printer we get this tape off there we go here is the camera remember these three items will be coming with the first batch of pre-orders this camera right here it has a ribbon cable and has some tape on the end of the ribbon cable that will get off there but the camera the light and the fan are going to be part of the pre-order the first batch of pre-orders let me say that let me say that you can't have pressure advanced tuning because that requires a camera hmm comes with some screws there you go and let me get this box out of my way it also comes with the fan and some double stick tape for the fan so here is the big blower fan that you see on the other ones let's see there you go we get this up a little bit there we go so that's the big blower fan the big duct on it and we'll see how to install it there is the cable so those are the three things you're gonna get in this box we'll call it the special box and super pumped you can see how big this thing is so I'm gonna put my hand behind it and that is a huge unit there and that's a big big fan unit no no comments it's a huge unit yes maybe you're meant to use the print as a diffuser to make it look yes how does the P1P have any cameras how does the P1P have any cameras in the tool head for first layer checking no it does not have the lidar it doesn't have that the other two have and I don't believe you can upgrade to that they'll correct me I know they'll correct me but if I'm wrong but I don't think that's the one thing you cannot add so if you're looking for the lidar go with the X1 $300 more but you get side panels and a couple other things the lidar yeah they are all these are AMS compatible which means I can plug the his only fan yes yes this is my only I should start a page for it they are AMS compatible which means I could go take the AMS unit from any of my machines and plug it into the back and it'll work so that's really cool let's see I believe the only things this does is the offset auto by level resonance I thought there was pressure advance hmm okay can you confirm that for me please in the future where they let you put ox fans on both sides maybe I don't know if you'll need it though I don't know if you'll need it give me give me one second I'm gonna grab some prints give me two seconds be right back I just got to grab these two last-minute prints here so we can get this rolling hopefully you can still hear me I am in my print room here and grabbing a couple now whoo this one's rough oh I got a rough one here I'll clean it up I was pushing this thing a little hard so when you print on these machines they are fast and that's great but then if you bump up the speeds to try to catch up to do a live stream bad things happen so I got a lot of weird stuff on this print here that usually doesn't happen I'll show it because why not this was done on one of the X1 carbons you can kind of see all this stuff here like that I pushed I realized I was behind and I cranked this bad boy up and while I can tell you that ludicrous mode is awesome it's not great for quality I think we know that so this is the part that our fan is gonna sit in and hold the fan up like that see tada so it'll actually sit in there hold the fan up you push it in and then on the back here we'll throw some double stick tape I believe it'll it'll hang out right up in here and we'll call it a day we'll plug it in so there's that this one yeah I'm telling you I it was great you can see is great mostly and then I was like oh I'm behind so I kicked I kicked it up fast and that was my fault so this one sex one this is an X1 carbon this was on what standard mode or whatever this is the for the LED so this is what the LED will sit in I believe actually they're going like this something like this boom yeah there you go I imagine I might have it in upside down I've got to look at the picture so the instructions are still being honed out for this stuff and I'm getting them but there you go it's in there see that and then yeah I think that's the only way it can really go in because you can't flip it the cable wouldn't be right and then the next thing I'm reprinting is this this is a this is the cover for the LED I had some translucent filament but they suggest using the white PLA the white PLA when can you pre-order the P1P starting the 25th which is Friday at let me do this the 25th which is Friday at 12 a.m. Eastern 12 a.m. Eastern so then this will if I did if I didn't break it I broke it right here is my fault I'm printing another one right now and it'll probably be done pretty quick here but if I didn't break it that would go in and you can kind of see how that's gonna work it's gonna be a cover right here and it'll be full-size because it won't be broken I guess I could have just got that piece and threw that piece in there but for this for this this will be fine and we can see what it looks like with and without it now I imagine either will grab a piece of tape here or some little screws and screw that in but there you go thank you so much bearded bond thank you thank you are you able to sit the AMS on top no you aren't there's no panel on the top so if you look here completely open no panel so if you if you put a panel up here somehow you could probably do that I'm guessing but no currently no let's see I'm gonna print Michael LaHus that would be hilarious he prints you on enough stuff let's see what are the extra extra accessories for the external control panel I don't think the external control panel is a thing K will correct me if I'm wrong but I don't think that I think that was just like an example but I could be wrong there are printable supports to put the AMS on top of the printer there you go there you go they just corrected me there are printable supports you can throw your AMS right on top but you see how that goes all right let's do this what should we do first I'm thinking camera cameras easy there are adapters to put the AMS on top yeah everybody's that thank you for throwing that out there let's see I like turtles David Lake that's nice you also like caramel apple suckers fantastic bamboo is sending me names to test my awesome Denise so the last thing we want to talk about today is what time we got whoo is this right here and as you can see I'm probably gonna fall off as soon as I start moving these I'm just gonna do this these are the side panels not seen in a stream yet brand new I I ask and you shall receive we'll just say that I'm gonna knock that fan over but we'll just take this all off yes it prints in brims and there's a bunch of pieces they sent these to me they sent the 3mf file to me so I don't think the files are available yet but they did send them to me so there's a there's a panel we're gonna play with at least one side of this so I had one flying on another printer and it failed like right here because I had this speed so high and it's literally only attached by this little thing on the bottom and it started wobbling I went back and looked and all of a sudden crash um that happens that happens right so there's another piece looks like maybe a bottom panel a bottom panel the white is blowing out in that camera isn't it let's see there we go there's another part of the panel I'm guessing this sits on I'm guessing this sits on here I'm gonna throw it out there I don't know maybe it's the wrong side but it has holes in the top and hole and not in that one so oh here we go yeah boom shaka laka there you go and let me peel that off this must be for the other one it is so if I pop this over here nope wrong one I pop this over here you can see it printed with holes up here and pegs here and this will pop together like that boom like that so that is a side panel you get a side panel and you get a side panel so there's that chip is with us hey chip all right the other cool thing about side panels when they start coming out is that my favorite thing is that you can basically upgrade this to an X1 carbon minus the lidar pretty much exactly and you can do any colors you want and stuff which I'm doing you can see I'm doing my side parts in blue this is polymaker blue and there now this is an ABS so the side panels you probably if you're gonna fully enclose it you want to probably print this in something stronger than PLA but the other cool thing is that you can let me pop this over here again that you can customize these oh there's another panel I forgot about there you go that came from the failed one failed after this part so there you go yeah I'll show you the back of the printer give me one second I need 10 to make sure I need 10 to make sure they work oh with the app they do work with the app I have four three X1 carbons and now agent Smith the P1P and they all work it's awesome in the app you just touch which one you want it gives you all the stats you can control it do all the stuff there you go Duane you could print it in PLA and then enclose it and then print your ABS if you don't have an enclosed printer already in your opinion should I get the P1P on proof man I cannot answer that I can't answer if you should buy it or you shouldn't buy it I can say this it's solid so far I had it for 24 hours right if it's as solid as the X1 and X1 carbon I would buy it again since it literally is a stripped down version of the X1 I would buy it again I hope that helps you and the cool thing someone wanted to see the back that is the back that's the back of the printer there so spool holder you got your plugs for your AMS of course you're on off switch your powers down here so so if you're asking me if I would buy it I would say absolutely especially absolutely if you're buying it for PLA let's see cardboard I think more people like cardboard there you go unlike the proofs of the printed parts are just for looks and personal aesthetics essentially yes take some time take time to find someone to take that and use carbon fiber panels there you go print them in PLA so you can enclose them the other cool thing is I can use my 1finity CNC carve me some sweet side panels if I want I can use my laser any of my lasers and cut me and etch me some side panels all you got to do is match up the the holes and you could do that why not I don't know if you can I don't know that you can place a second blower in here they can correct me if I'm wrong on that but I don't know the answer to that also the cool thing is let me pop back over here because it is going to be released why not custom side panels huh something like that where you can take your custom side panel and make them anything you want in this case you had to tech logo these are some sweet colors and then I went all sorts of crazy with a whole bunch of poly alchemy and different crazy colors and went that way look at that yeah so the cool thing about this is you'll be able to take the models of the panels and do whatever you want you saw here custom side panels are ready what do you think let me know in the chat what you think I love this idea so let me show you just a quick let me just give you a quick instance here I believe I could be wrong this doesn't go here I thought it goes right there maybe or is it I'm crazy this is my first obviously my first time there we go I had it on the wrong panel bam you can put another one down here going up you can leave it like this which is probably what I'm gonna do because this thing is gonna be my PLA machine really it pops in there there's some a screw hole on the back you can screw it right in there check that out I love it I love this edge of desk that's funny finger painting again yes yes I don't paint the finger painting is good agent Smith for the win I mean and then on the other side I'm gonna pop this one on boom you got you can do anything you want say you're say you're a channel maker right you're somebody like myself and somebody a sponsor wants to pay you to put their panels on a machine there you go you could do that if you have a cool design it could be we had David Hewlett on Monday it could be Stargate it could be see it could be anything you want and then you just pop it on your panel and print it out now the cool thing about this is you can make anything you want how much are you paying I am paying myself free lunch to put these panels on my machine the cool thing is I popped into bamboo slicer I colored these up and dropped it on the printer and walked out the door the AMS took care of everything all of the layer changes or all the color changes everything I have to credit Kay at bamboo studio for hooking me up with the the design he hooked me up with a sweet side panel here and then I colored it all in and you know I gave it the colors I wanted and I love it but dark sunglasses for agent Smith yes yes NASCAR for 3D printing there you go there you go but the cool thing is like with the AMS multicolor stupid easy I loaded up the filaments told the printer to print and left and that's it in the back this is how they connect here for this panel you can kind of see there's a screw hole here this is a ledge that sits on top of the thing and then another panel would normally come up and meet this and connect into here so that's how that works but in this case I'm gonna use them like this literally one on each side like that and I'm not sure if I have I might I might have small enough screws to actually screw these in and we're gonna try it but I don't want to put the panels on until I get the camera and stuff in because you know I believe I'm so backwards right now because I'm on the wrong side of the machine it looks like there we go I'm guessing something like that but I'm wrong I think I think this is on the other side but give you an idea let me see oh no I bet you I bet you you know what happened I might have to turn the printer around here I printed the other side of the thing the other side the other other side this side remember I said one failed I didn't have time to redo it that's probably this one I'm guessing this one goes in here like this there you go that'll sit in there like that hmm I can't see that you're like hey dummy I can't see it so I will have to I'll have to move my my filament holder here there's two holes that will screw into that but just to give you a quick idea that'll sit there like that this will sit here like that we take a panel boom boom maybe make sure it's in the right spot maybe drop what you're doing a couple times it's not a project unless you drop it there we go hang on read my other one there we go let's see there we go something like that you get the idea and then this will sit up here like we said like this I don't want to put these on yet because that you know I want to put the insides in first but hey huh huh as they just fall apart and there is bottom pieces too looks like with just the corners in the top panel see it looks like looks good with just the corner yeah you know what I like that all that aside though we have other stuff let's drop some stuff into this thing I'm gonna start with the camera because it's easy that's what I'm gonna do probably gonna bring another camera up so you can see it better this one I should have raised a bed a camera to film a camera we are gonna be working right here right here and then the cable will come up around the back and I'll show you that and let me give you one of these alright if you have questions let me know it's boy in space Ben how you doing tours here tour what's up so yeah can you glue these together absolutely I have not yet as you can tell man there's a hotend cable in the PTFE come out the back of the machine or the top it's easily to put out the other way for a top cover I believe you can move it through the back slot it probably should go through the back slot to be honest and then you could use the cover yes I'll show you that in a minute hello big fan yes this is my biggest fan my biggest one yeah all right where is that camera camera check let me do this camera so camera goes in over this way again there'll be full instructions when you guys do this when I'm doing it there's not a lot yet but I think it just clips in it does it just sits right there and should just clip in like that boom and then what we need to do is the the cable has double stick tape I can show that as well let me turn this bad boy around just gonna get like dizzy as heck today it has double stick tape on the back right right there it runs up the side here and then under this side panel here and then we'll plug it in to the top so let me get you a little better view of that there we go it's up to drink what are you guys drinking today let me know I wonder how they could mount that fan yes sweet fan holder that I need to clean up because I ran it way too fast and then I'll show you we'll show you I got the bubbly we're rocking the bubbly so there's that whoo so I'm gonna peel the tape off and hopefully hopefully do this correctly the first time that way I don't have to do it a second time right yeah let's only do it once there we go and we're gonna slide it under bam so this is pretty awesome it's gonna be hard to see because of the lighting here but see this it's almost completely flat against your machine here it'll allow your panels to go on it'll be hidden nice ribbon cable you won't even see it now for the next piece you know what else I like about this I can maneuver this thing so much easier because it just open ooh Ben well hopefully we can get that updated in a firmware maybe or something alright so camera is right there there we go right here it runs up the back in here like this and then I should raise this bet up I should still raise this bet up it's a great tripod holder unlike tripod you know he only holds one thing it's a rasp it's like a raspberry cam kind of let me think how can I do this actually well I just raise you up there we go so this is the back where the LCD is the LCD is over here this is the back area there this I believe peels back like that just carefully and there is a connector right in here so if I can get you a better view right up in there right there that the camera connects into I believe it's gonna be hard to show that but we're doing it unless the floor is wet or unless you throw that off there whoa thank you so much hobby hands two dollars two dollars and then there's me who popped the little tab off on accident because I do that and for those of you have been watching my videos for a long time it's not like a shake or something it is nice to be able to get in here and work it is not nice that I just knock this off I got a little too rough with that little black piece oh man down man down we'll find it got it nailed it um I may or may have not just drop that on the phone let's see flashlight there's dropped it on the floor but that's okay I may or may not know where it went either out there it is the question is even if I did get it if I would get it put it back on all right I'm going I'm gonna just keep moving without it we don't need it twenty dollars bite speed coming a long way from upgrading enders thank you so much thank you so much light speed I appreciate that thank you all right I appreciate that thank you so much man USB for anything like Joel said all right I need to put this in here we're gonna do it we're not gonna use that black clip because well I just dropped it but we'll be okay I'll go find it and we'll deal with that after the stream don't worry that's a that's a man down situation and it's the lock clip course so you know we're gonna hope that this stays in these are usually like two seconds to push in and then lock that little clip in but my you know it wouldn't be a good stream if something didn't break or go wrong it is fixable really easily I just have to find it and get my little fingers or get my fingers in there all right we're gonna do this for now yeah hopefully that stays until I get that clip and we replace it let's see cool so camera I would say five minute install time don't drop the little clip on very dark carpet where it's very badly lit underneath you bad idea yeah captain tape it down I might have to you don't you don't need a camera I'm a comedian yes yes it's point yes it's point space big fan yes yes it is let me show you my big fan where's my camera over there there you go this is my big fan okay what do we got next we got I'm gonna pull up a picture that they sent me and we can we can look at it if you want together it's just about the fan so essentially the fan you take a couple pieces of tape you remove the soft glue from the screw holes and at the bottom of the fan okay oh cool it actually they sent me some quick instructions and this is kind of sweet so let me I'll share this why not I think I could share this Ben yell at me if I can't share this but we're doing it all right I need to put the found hat I need to print the found housing by a four there you go there you go yes there you go thank you so much again Steve and I appreciate that all right so let me get back over to these instructions we're gonna start over here I guess I could back that up a little bit there we go all right here it is so we're gonna we're actually going to screw the fan into the housing which is pretty dang awesome and it just pushes down in all the way and it says you need to remove oh I see the little rubber bushing things I'll show you what that looks like here just so you see it here we go let me move this camera back over here you got cameras everywhere we got panels everywhere Ben is printing some panels I look forward just seeing that on your tiktok Ben so there's these little bushings here right in the bottom of the screw holes we're gonna it take that out I believe is what it says so pull them out there we go there's one there's two I'm gonna keep them aside just in case so now they are out of those and we're gonna drop this in the fan mount put it push it in there and it should go all the way in and you'll see the two screw holes back here they line up then we're gonna take a couple of the fans I'm sorry it's a couple of the screws the fan is the key boom boom so then we're going to take it looks like a couple of the screws and screw that into the bottom and then we're going to screw the fan into the bottom of the machine as well it looks like which is pretty cool pretty cool let me get my screws out let me get a do I need here so they give you a couple different styles of screw I'm assuming the two that are self-tapping will go into the PLA and the two bolt machine ones will maybe they're all similar there's two smaller ones and two bigger ones we'll say that I'll show you that in one second I know we got the I know we have the instructions up here let me see what I can do but so right now we're we're looking at this piece right here we're going to screw these two in there can you show a close-up of the fan connector sure I think I can do that why not this is my biggest fan and this is the fan connector hopefully that's close enough I have panels everywhere I'm going to lay these down just like this grab my handy dandy tea handles if you were with us yesterday you know about my tea handles I'm going to go with the bigger ones because I believe it needs to catch and then we'll just tighten this down in there we go so don't forget we learned it today that the first initial batch of pre-orders will go on sale at 12 a.m. Eastern it will be the initial batch and the initial batch will come with a fan a light and a fan a light and the camera and a low lower quality camera I think that you know just the initial batch so that's gonna be pretty awesome there you go so it's screwed in there never mind this garbage I'll clean that up so then the next step BAM I'm like well bamming everything today BAM the next step is throwing some sticky tape up in here and dropping this in and then screwing the X1 carbon down so that's what we're gonna do that is what we're going to do I believe there we go get my bed back on there I believe I'm gonna have to lift up my bed to make this happen I could be wrong about that maybe not maybe not so let's take you back over to the printer and see what we got cooking here taking back over oh gosh oh gosh you're going for a ride going for a ride okay now see what's happening there boom so I believe we're gonna put some tape on this panel here I'm gonna kind of measure it and see where that needs to go so if we take our fan yes this is my biggest fan and we we kind of see it should sit in there like that there we go should sit in there something like that and just just make sure you're putting it in the right spot and that your screw holes are gonna be correct because that's gonna be the thing so they kind of showed where it needs to go up here and I see now but just make sure before you stick this in that you're putting the tape in the right spots the tape in the right spots according to the pictures they would be right here so we're gonna do that so I'm gonna grab some double stick tape I would say right there they give you extra which is awesome just in case yeah let's go right there we'll do a little peel hopefully you can see yep good hey guys doing let me know in the chat I know we are we're installing some upgrades here on the P1P soon to be released for pre-order couple days here couple days and I need something to drink quick thank you everybody for the donations I really appreciate that the super chats all the donations it all means a ton and it helps the channel out a lot so thank you thank you thank you okay so I'm gonna push this in I'm gonna kind of line up where the screw holes are first maybe there we go about right there perfect and then I'm gonna push my fan in right into that double stick tape oh yeah it doesn't feel like it's going anywhere now so I pushed it in down below here let's see if I can get a good view there we go down in here there is two screw holes maybe I can even get you a better view there you go their way in there you can see them right here and on the other side and that's what I'm gonna screw in the next using the other two screws that came with the kit the loudest part of the machine on the X1 Carbon is a chamber HEPA fan otherwise it's not loud at all compared to many other printers it is it's it's it's a loud printer but I tell you what it's fast getting a bit funny this install get out of here get out of here gonna replace the tape when you put the panels on it's possible you're probably right because I'll have to screw dang it I'll have to screw that panel in right hoping that's not the side we need but you're absolutely right on that you're absolutely right I'm gonna have to pull this out when we put the panels on I should probably check that before I get any further let me just see if this is the side that the panels are gonna go on it is of course so real quick let's see before I let that stick forever in my life let's put a panel on here's one we'll put this one on Wayne my wife will kill me if I buy one of these love my X1 awesome so this panel is gonna sit in here the camera is there so that could be interesting I wonder if I wonder if we're gonna have to modify it because the camera is there something I also didn't consider but let's see we will so okay if you're watching something we might need to think about is this this panel here is gonna hit if I put this up here and the cameras on it can't it can't go past this and the camera clips into the clips into the frame here so I'll have to modify this this side here and we won't be able to do this one right now during this stream it's boy in space there you go huh there's that one there you go boom loving it loving it I sold both my Prusa's 100% Quarks why now all band all right real quick think cool cool cool cool let's open this back up wrong one naturally boom okay so we're gonna keep rocking then I'm gonna do the other side for that middle panel so we can see it I will modify that or have it modified because you know I suck at modifying or at least modeling push that back in there hold in there for a minute well there we go let's get the screws we'll screw this fan in get rocking the time we got 110 nice that's cool Stephen and let me crap this down boom that's where I'm going or I'm going to attempt to go next rail up I will yeah oh mine idiot am I I might be somebody is genius and I'm not thank you for that it the side panels I'm printing are a bit of a nightmare oh no well don't try to put them where I just did because that's not where they go I just someone just reminded me it's the next rail up so there's that so don't put them where I did all right let me see where's these holes at always trying to find the hole huh of course magnetic would be awesome but it's not Prusa resales similar to Apple products I see them on marketplace a lot put mine in a server rack when it shows up awesome awesome this is a bit of a fun part here and my my beloved my beloved T handles are either going to help me or hinder me back you guys up a minute here we go there's one in and the other one when I pull you guys right there and dump it up because I'm clearly I lost it under the bed the bottom screws across the panel is still behind the fan I see what you're saying but who needs that screw I give I catch what you're throwing and and what's funny is that this is also new I they didn't like we were talking I don't know that there's even instructions on the panels yet but luckily bamboo is awesome and they shot me panels and we got them printed overnight and we're there okay fan is in fan is in at least mounted now what we need to do is pop that up I'll show you real quick I'm gonna make this faster than the rest of this because fam's getting impatient we're gonna run the fan up around the top here and then down into the into the control box so I'm gonna back this camera up a minute we're gonna spin this thing around and we'll get you a better view here boom you direct drive will be awesome TPU it is awesome for TPU for example if you have not seen death racers this is a death racer check my my channel here there's some videos Sam Prentice the man behind the death racers there's no battery in there good all of the tracks you see here printed 30 at a time on an X1 carbon and they're all polymaker TPU so all of these tracks are all TPU printed on a on the X1 carbon so phenomenal he's laughing at me phenomenal for phenomenal for printing TPU yeah okay so in the interest of not taking my filament out of the printer I'm gonna do a big no-no and set this spool right in front let it run all over because I got to take this bell gosh this is a bad idea I gotta take this back panel off which consists of the screws that you see like looks like around here we're gonna run the fan up and plug it in but I need to take the panel off make sure I got the right one this is where people that are smarter than me would use a powered drill or something but I like my T handles a lot that's sweet thank you thanks for death ray shout out especially since I've been giving you crap on this year hey I fully expect it from you Sam 100% I'll even wobble my desk if you really want you got me beat I only have two lasers although 90 watt nice a 90 water that's a big bed size to you by the way I have two CO2's and a bunch of those other style diodes but I really only use the CO2's a lot so here we go now I mean now we're gonna play this game called don't lose all the screws yeah one two hey once we do this we'll be able to see what's in the back right huh should I cancel my Neptune 3 Pro for this one this is looking very nice mmm I don't have a Neptune 3 Pro I don't know what the price is on a Neptune 3 Pro so I can't answer that for you but I can tell you it's really nice one of the best companies 3d printing wise I've ever worked with as far as feedback as far as everything about 240 hey if if you can afford this not gonna break your budget or anything like that then you know I would definitely look into it but I mean there's a big difference between 240 and $700 right so there's that something that I would point out that's why I have print boxes to put screws in I should have should have a tool caddy yes I should have I should have I didn't lose any yet there's one more up here and then there's something that I'm gonna makes me laugh there's one there okay and then there's one in the middle that says void on it hopefully K this doesn't void me there's one right there hard to see and it has a sticker over it says void I'm hoping this doesn't void my warranty my sweet bamboo warranty because they actually are good about honoring their warranties by the way I just go for it yeah oh man okay oh one more screw one more down here hey K this bottom one on top of the power was not part of the picture just a heads up so the picture I'm looking at does not show let me see right here this is where the power switch is it doesn't show taking a screw out right there but I most definitely did have to so just a heads up for the team so if you want to you know drop another screw right there and also down here the very bottom one let's see if I can see it again oh of course I'm not my mouse is not on your screen there we go sorry right here and down here and over here just a heads up keep that in mind boom warranty K said boom warranty voided but yeah there's there's a screw here a screw right down in here and a screw over here that need to all come out as well just for a documentation wise let's see okay go back over this way that would be cool bringing out a larger version I hope so I think we're all hoping this I think we're all hoping this I want to drop okay here we go change to main cam you got me too I can do that but yeah but then you can't really see like the panel I just took the back panel off and you guys and you can see what's in here let me let me give you a big reveal watch this let me put this back in its little spot I'm gonna get you all up in its business you can see how the camera here works ready look at this big reveal get filament out of the way that's probably gonna be tangled boom big reveal there huh I don't think I've seen anybody pull apart a back panel yet and show you inside I could be wrong it could be wrong I didn't see it yet though yes that way you can see more well check this out there's your board up up in there we got some steppers looks like your PSU is hiding in here so there you go so this fan cable there you go needs to run up and round it in so we need to look at where the fan cable runs says go up there around in there and boom kind of anticlimactic what do you what do you expect what do you expect to see like a balloon fly out and I don't know what we're expecting to see to be honest but I can't see inside of here so there's that and I'm just gonna like twisting this filament all the way around the printer don't mind me about that okay needs to go in down in there there's a little like pass through that's maybe right there let's see that's an interesting one but if you're still here hopefully you did this once already too and you know where this is supposed to be traveled through I'm going right here there's a hole and this is like almost impossible to see and show you guys there's like a just a small hole to pass it through and I'm gonna make sure I'm not overlapping that filament I'm not needs to go right down between the stepper and the frame that's what I'm doing what's a warranty you looped around your filament I didn't I double checked I double checked I promise I thought of it while I was doing it I was like I better double check I am gonna bring this around like that boom I like it I like it so now we just got to plug it in let me get this back around if you want to see that where is it gonna go yes call call call the authorities I've been tangled up oh man that's funny all right I see where it needs to go and I'm just gonna plug it in there I'll show you how about that I wouldn't be a good channel but I didn't get you all up in the business of the board and show you I believe it goes in this one right there the second one and not closest to the wall but the one second like away from the wall I guess I say the wall it's really the poop shoot I love that they just like embraced the poop shoot word because that's something that you know we kind of came up with in the beginning when we saw the carbon how about my hairs in the way you know the poop shoot huh oh geez oh geez and my thing you know it'll be easier a needle-nose pliers because I have my fingers are stupid there we go I'm surprised that they don't have a trigger on the back to let them know everything goes off wasn't that the thing on Prusa like a couple years ago like they put something in the board that if you modified it or something it would tell it would they could be able to tell or something like that I thought that was a thing didn't ever do that so it didn't really affect me there we go nailed it nailed it now we're plugged in hopefully it works I guess I should maybe test it but we're going for it I'm putting the back panel on we're not messing around this makes the X1 worth the money if you're looking for it maybe I tell you and if I was doing this myself I've probably been done in 20 minutes let's see oh only so you could mod the firmware got it got it got it probably cool I remember now so that's on I'm gonna put the back on so here's what the poop shoot looks like inside I guess you can't see that because I changed cameras but it doesn't matter the boards tighten there everything's nice we're gonna put this bad boy back together I probably should make sure the light does not plug into the board before I do that so real quick how we doing we doing okay still 150 of us so you know the good crowd does the light where's the light plug into I cannot tell here I think the light plugs into the back where the camera did so we're good good good good thanks thank you Ben so while I'm putting this together I appreciate that Ben see it's awesome that you've done that already because then somebody has the poop shoot has a flap does the poop shoot have a flap like the X1 carbon yes it does you want to see up my poop shoot what time is the give away what are you giving away all right you asked for this there's the poop shoot yeah here's the flap there's a little flap in there huh huh you've you've seen it first here people right up the poop shoot affection if you don't know what that means this this here ejects every time you change filament it cuts the filament and it has to purge out that little piece that's cut in there that purges it down here and ejects out the back affectionately known as the poop shoot that's that's you know what us in the biz call it I don't know if that's a thing the biz but that's what we that's what I called it and it's hilarious and we all think it's funny because we're five years old but it's funny it is funny let's see where's my taped one I'm gonna get this thing held up real quick and then I can knock all these screws out so any questions any questions opening new tab oh don't do not Google poop shoot don't Google it that that's a bad decision that that is not where that goes let's see how maybe it is maybe it is where that goes but it's not gonna help me where's that tape one I know I had but remember I like oh there it is watching you do this makes me want to buy the X1 do it honestly if I was not doing this live it would be so much faster you gotta remember when you're doing this I'm talking to everybody I'm trying to look at comments and keep up there which doesn't happen very good I just put the void sticker back on don't worry we're solid now I think K just told me I'm no longer void because the screws back in it probably could fit some stuff yes but here's the thing if you're gonna get these you're not gonna be trying to talk to everybody on a stream you're not gonna be filming and recording and all that stuff most likely I'm not gonna say never but you're probably not gonna be doing that that was almost the wrong screw so you know it's probably gonna be way faster than this and you can already tell I'm rocking on putting these things back so honestly I would say five minutes for the camera maybe I would say because you have to unscrew the back here and you have to screw everything in nicely ten minutes ten minutes is safe for the 10 to 15 for the fan and I would say with the light it looks like five minutes where it's gonna go don't forget you have to print the parts so don't you know there's that yes true story you have to print parts so there's that time involved but the cool thing is you can print any color you want for the fan holder for the for the LED holder print print whatever color you want and of course beef says it's priced that way yes I love it blah blah blah what's taking so long yeah Sam hears that a lot actually blah blah blah what's taking so long all right might help a few line that up right there we go okay those two didn't need so we are back on the fan is installed I'm gonna line this back up very nicely because we don't you know want that to go springing okay it's gonna whatever it's gonna be crazy there we go so now we got there we go fan is installed you can see it right there cable runs up here and through the little dilly here guessing there's I could probably actually move it over a little more but I probably will do that but that's how it runs just like that you probably even make it go up along the back and in that extrusion right here that's actually even a better way to do it in my opinion let's see when you buy a MacBook every 300 it gets a jump in features yeah I feel like there's a modeling pricing structure kind of alright that's it camera let's do this so I'm gonna put it back here just for a second let you guys enjoy the look real quick see what it looks like any question shoot me some questions 160 something of us watching I need a quick drink I need to go grab hopefully what's the new lens for the LED I think I just heard it finish bubbly bubbly and then this in press oh it's supposed to press in got it so I'm supposed to press the the LED in there we go now it's staying I didn't do that before there we go solid so in the holder at Prince here you just got to press it into the recessed area don't be afraid don't be afraid it'll go right in there let me go grab the new lens I think that's ready be right back in two seconds okay maybe like maybe like 30 seconds oh maybe it's not done I guess I could have just turned on bamboo slicer and looked all right well how long do we got here got a little bit of time left we're just gonna rock and roll with what we have for today what we do know is that I need to find that little black clip and fix that and I'll do that shortly also we know that if I pop this back up whoa I did I did everything backwards what do you mean and do stuff backwards I just didn't read offset maker lab how you doing 63 likes we can do better than that let's see boom boom okay pop this bad boy open now I I don't disagree that illustrations are there but remember these are you know probably not solid yet because I just got them so it looks like we're gonna tape it down here let me do this we're gonna scroll back over maybe if I'm got crazy there we go boom so I believe it's on the same side as the camera obviously we're gonna double stick tape there and there then oh that's at the top of the machine it looks like yeah so in this case you want to put your side panel on first if you're gonna put side panels on because if that's at the top of the machine like it's showing and not on the middle level then it's gonna block your side it's definitely gonna block the side panel holes so let me look let me just double check no well whoo it won't block them it actually the little stand the little stand they have up in here the standoff kind of area there is enough to allow your screw to go through very smart very smart so let's see that is this corner right right my crazy that's that corner hopefully that's what we're putting in all right let's see what we got here great conversation here upgrade party don't forget to hit that like button thank you check to see if it covers access yes check to see if it covers the screw access like the previous install does not I just checked I have three it's really one printer three tiers absolutely kind of like what what is that an iPhone or something where you have like the big one the second big one and then like the little one the not so big one all right here we go in this case I'm gonna do something different we get this of our way making sure there we go so I'm actually let's see if I can do this this I'm gonna do it it's gonna go right here I'm not sure I can get a good view this way but we're doing it anyway I'm gonna put tape in here and then we'll plug it into the back of the screen area cool cool all just like we're talking about make sure wherever you put this up in here you can still get to the screw you can still get to the screw holes for your panels if you plan to do panels see up in here you got to get to the screw hole that's hiding up in there right here so make sure you can still get to those wherever you do so yeah yeah yeah boom shaka laka there we go or I can go back to here doesn't matter man I want to add more lights you I don't see why you couldn't the whole top rail is open so there's probably no reason why you couldn't just add more lights honestly I mean literally the whole top rail is wide open so there's that I'm gonna drop my double stick in give it a quick peel my camera above me is making all sorts of crazy noise my Voron has more lights you can see it from space nice RGB huh I like it like it why not that would be cool I like the idea of like making the printer tell you when it's done by lights and stuff that's just kind of fun to me um all right let me just make sure I can access that it's gonna go right there and I just thought of something before you do this make sure you put your film your cover on here in my case I'm gonna push it way over here because my cover is not on and I'll pull it off and put the cover back on it I'm pretty sure I can do that with no problem so I got it um I got it officially right here you can kind of see it along the top rail has a terrible view isn't it yeah it's a little better here there we go there we go like that and then it's going to come right around here and plug into the back of there remember if you're doing this without all of the cameras without filming and all that stuff I really think it's gonna be 10 minutes for 15 minutes for the fan maybe and then five minutes for the light and five minutes for the camera I mean it's so fast and what's really nice about this thing is it's so sturdy you can just flip it around and move it and all that stuff um all right yeah yeah all right let me pull this open let me see where we're going I gotta really find that little clip um and it looks like it only can plug in to one little spot that's what we're gonna do I'm gonna plug it into that spot I think that's right there no maybe maybe maybe not it can only plug into one spot and it just clips in beautiful beautiful all right for the for this stream I'm gonna put this in here like we talked about already we were gonna fire this thing up oh you know what should we put some panels on let me know in the chat should we put panels on I think we should why not okay that's like the big thing right the panels has to go on this side boom we got a fan we got lights we got a camera hopefully all in working order the only thing I question is the camera because I lost a little clip on the floor I gotta get it after the stream push it back in and lock it in panels um panels let's do panels talk about panels okay I'm a dummy these go up here so there's that um I can find it interesting let me see this no those are the same so it shouldn't matter it should not matter which panel I throw on there as long as I can get to what I need to get to right I don't think I'm crazy maybe I'm crazy let's do panels your choice all right I see that led I see that led to high x1 illuminates a little in its position in this p1p is less maybe um it's a good question it does that's where it says it goes so we're going to check that out I'm going to wrap up the cable too because the cable is kind of all over the place all over the place getting dinged dinged on the phone there we go put that up in there the cable management okay here we go panels so we got lots of panels um last thing we're going to do I gotta see if I have enough screws because death racer I haven't bought any uh screws um because death racer since death racer so there is one side panel and that's how it sits and it screws in from the back this bad boy pops in like this um and I can I can make that fit I'm just curious real quick yeah yeah you're not looking boom look at that you don't like that color yeah I like this color better magnets would be cool you could do magnets and just do like swap out ones that would be pretty sweet here we go that's how it's gonna look and this one will go up here I gotta get my screwdriver and fix it I'm gonna sit in here like this and then everything gets screwed in of course magnets are a good idea offset maker lab um actually a lot of that you know a lot of the crew over in the uh death racer group would probably be like let's do um threaded inserts and magnets you know the good stuff um so I gotta take out this uh that I have to heat up the no I don't I lied I don't I gotta take off there's a little spool um guide in the back here we put it on yesterday and I gotta take it out because it gets screwed through the panel and it does that so it can sit in the back here swivel around etc thank you thank you Sam um bamboo lab is made by DJI engineers right um so a bunch of the crew came from DJI yes I can I can say that that's I I've been corrected on what I can and can't say because illegal but yes um I can say that a lot of the crew came from DJI and I can say that uh yeah I cannot say what they worked on because there's no issues there but there are little guides in the top here that these should snap into Ben's watching but I think he's getting his printed now there's one I'm missing here one there what did I just drop I'm always dropping something it's not a project unless you drop it right there it is all right questions you guys got questions let's roll there you're blocking the main panel screw with the fan are you talking about the second screw the one lower I think that's what you're talking about there is two there definitely is two but I'm not worried about the second one right now to be honest I do see what you're saying there's there's two screws I'll show you what he means or what they mean there's two places to screw on the panel one on the top rail one on the middle rail there and the fan currently absolutely is is is blocking the um access we'll call it to the middle panel but that's only if you want to use that one right there's no there's no rules here have you made panels for the wobbly bench you and Sam and tripod have been talking huh I just gotta get these I don't know I see what's happening threading threading pla is happening that's what's happening where's the fan blowing out behind the panel it doesn't doesn't blow out here um but I can tell you I'm someone's trying to chat me my phone's blowing up and I am probably got to get that in and then the challenge on this one is wobbly desk bonds I love it use some of the guns this is the uh the wobbly desk fund yeah yeah that's what that's what we're doing come on so I would call this almost in I don't think so good enough off the re this panel up here there's two attachment points that go into the into the printer and I'm just in a hurry so I'm leaving it oh man we got stuff to do for Thanksgiving I knew that wasn't on there all right all right all right good whoa whoa just making sure uh we're good okay so for for viewership sakes I'm gonna I'm gonna I'm gonna do this a little quicker um and so I can like let this thing sit here you guys can see it but this back this right here is a little spool attachment yes pratt the plaid panels that's all sam sam is gonna print plaid panels for his being in scotland and everything so oh man down this would be easier if I grabbed my electric screw gun but um so there are in this side two holes in the side of the the panel here and then this deal here has to screw into them so this see how I've got the screw holes there this goes into here actually sits like this and you got to get through these panels into the side panels of the hole and I'm missing I am missing unless I'm supposed to use these other other screws instead now they did give me another set of screws to use but I don't think they're long enough I'm pretty sure they're not long enough to be fair they're not okay plaid would be awesome plaid would be awesome I know where you are I'm just messing with you I thought maybe you would um like that funny funny joke oh you know what they gave me other screws let's see check these out so there's another bag of screws that I didn't see and they appear to be maybe better for this situation so let's see if I can let's see if I can hit the hole per se if I can get one I'll be happy get in my belly I'll get out of here it does not like that I should have pre-drilled these pla holes whatever you get the idea I don't really need that piece on there don't really need it on there do I so like when we make videos and we're like oh yeah you just drop this on here and yes I have a problem aligning the holes absolutely most of it has to do with hole alignment and the fact that I'm you know drilling through the PLA at the same time which sucks what's going on here I really should just grab my my screw gun and rip these in there because this this should not take this long this is just you know me being dumb and what's funny is I already had these through here once definitely price segmentation yeah we talk about desks again maybe there we go so that all that goes in I'm just gonna thread these real quick so there are literally two holes that I just need to screw these into and hit and it holds this top one on that's all I was trying to do all I was trying to do with a side panel sag if you if you start printing maybe I would definitely if you're going to print higher temp stuff I would definitely use higher temp material for your panels so someone recommended earlier printing PLA to make your first panels and then reprinting them in your high temp after that let me see I think I know what's happening I think K warned me about this actually but right now it's it's all coming back to me yeah nailed it 17th time is a charm baby sometimes you just you know gotta do it a couple times to get it right what time we got holy moly calling that a win panels bam this one sits on here I would definitely glue these I should just grab some CA glue and make that happen real quick but I just want I want you to see them you know that's that's the thing I want you to see them so we should we should glue them there is screw holes along the back here as well where we can screw the back ones in I'm not going to do that because we're always we're already so far in this video I'm sorry I've taken this long but someone said I'm my fan duct is in the way and they're right because there is a second there is a second screw hole to hold down down here in there so they they are absolutely right the top clips over like that good this holds it in like that and then we have panels let's turn this here you guys can see it better that boom boom and this is me not not not screwing this in correctly yet um that goes actually down like that yeah there we go great and then if you screw it down it'll actually stay on there what do you think is that cool what do you think you're right about the fan so the fan is does block your second hole and I wasn't going to use it but you're going to need it because it is it is a little bit out there um but but what do you think cool I went with the classic white because that's the giant spool they gave me remember they gave me a full spool in this box I don't know that for everybody it don't don't let go I don't know if that's for everybody I think it is though K if you're listening does everybody get a full kilogram spool remember I can swap out too so I can throw this crazy one on that I did with a whole bunch of like poly alchemy and stuff like that keep it straight like this I think I'm gonna I like this look I'm gonna put this look on the other side have two sides why not let me know what you think I'm gonna we're gonna rock and roll maybe like a few more minutes here and if you have questions comments concerns anything let me know now I do have more panels that I didn't put on yet um to be fair this is the first time we've done this the first time we've seen it um there is screw holes through the back here and there is screw holes into the back of this one so I'm gonna get those all screwed in um um let's see what else is there here's this this one I believe maybe yeah so there's two there's some screw holes on the bottom here here that will sit in um and I'm blocking hopefully all the camera why not right that's what I'm good for blocking cameras there we go oh there's tabs noise that's smart there's some tabs in these this bottom panel it goes in like this I'm gonna do a video on a better video on like all of this by the way um making sure it's all in there and fitting and glued together not just like thrown together quick um but but there we go I should throw some screws in this bottom panel just just to hold it right I probably will right after the stream there we go don't touch it there we go what do you think bottom panel's on this one got a little wobbly while printing it finished though um top panel's on there you go because it falls right there uh it's only falling because I didn't put any screws in this thing yet and I didn't glue this if I glued this it would be up but I could throw some ca on there really fast and that would not come down again all right what do you think that's pretty dang awesome I am super impressed by this I love this um I walked a 5k during the stream man that's awesome I'm glad I could help you get your exercise double sided tape absolutely you can do that um there are screw holes like I said up through the side of this side on this side there's screw holes right into the back as well I'm gonna put all those in um I gotta find screws that'll fit my death racer took a lot of my shorter ones and so I'll have to find some but you get the idea this thing is on it looks I don't know let me know what you know let me know what you think I think it looks freaking awesome um I will screw it all in I'll get it all secured because I want to be able to move this thing and if I move it right now it's all gonna fall because yeah um so there's another fit a piece that fits in the opening sure on this design I don't think so but if there are other designs yes there is the pegboard covers all of this um I think a couple of the designs cover all of this I am probably going to keep it like this um for the simple reason is I'm going to do a lot of PLA and I don't mind the opening I want it to be you know free flowing the only thing we haven't done is fired this bad boy up to see if the camera fan and um everything work and while I'm closing out the uh the stream here I'm gonna do that hopefully we have everything working and no smoke so I'll move a camera shoot I love this I love it don't jump on the desk just curious how the camera looks everything will shake off yes it will if I don't screw it on everything's definitely going to shake off um ladies and gentlemen this is the P1P side panels custom side panels from bamboo slicer I love it I love how they look you can do them in any colors you want um as you can see you can customize your own side panels we got the edge of tech logo on there I absolutely love that you can customize this printer um I love it let me move my camera over for Sam I have to say it's phenomenal well he probably has his edge of tech wig on right now um to be 100 on us he's he's like yes all right let's just go into the menu I don't know where you tell it to turn on so we're going to find out here oh oh I found it maybe if I can there we go we got light let me show you I had to find it in the menu oh man down man down we have light right here yes so um you can turn it off and on in the menu also we can turn the fan on oh that's this one up here that's this one a lot that's the wrong fan I think we have to turn the other one on when we print so I can just test it we might have to start a print um to fire this one up we'll do that what do you think I do my we're able to see what is will you be able to see the sides where you put it um depends where I put it but yes yes it makes sense why you printed it in PLA it's not just an enclosure it's for style boom the light is on and I can tell you if you can't see it bouncing off my face it's very bright um I don't know that I can I don't think I can just turn the fan on oh let's go check the camera real quick we have to right we've been in this journey this is taking a couple hours but I've also been talking a lot so there's that it is what it is um I'm hoping the camera works remember I I gotta grab that connector it's on the floor and um oh it's saying no camera no camera device I might have to check that connector and plug it back in let's turn everything off but anyways what do you think does it look cool will you be able to see the sides I think so um there you go it does not have a door there's no door the x1 has a door this one does not there you go oh boy oh boy um set it to ludicrous and let everything fall comically off yes right thank you fix them dude I can only imagine what you're going to do with these panels man um you do some awesome stuff excellent extra leds uh dots in the glass logo hey you could definitely light up I mean you can do whatever you want right it's it's leds so you can make more that go around on the inside probably design brackets to like tip it down to go farther in you can probably um I know somebody's going to take leds and make a panel that's lit right why not um you could probably print this uh like Andrew s does some of those sweet signs um with the leds in the back you could probably print like like a sign where you could light it up and it illuminates that would be pretty cool that would be pretty cool no door he had yes all right um camera because I'm uh in the in the interest of understanding I probably should just find that it definitely not connected I see what's going on here uh it's like hey dummy go find the lock for me don't just throw me in here like this um that's what it's thinking right now I'll do that as soon as we get done with the stream I'm finding that it's right here somewhere so this thing's booting up again we'll test the camera we got lights I could fire up a thing to see if the fan prints but I'm pretty sure the fan is going to come on uh why not why wouldn't it I don't know if I need to do anything too once you get the camera in uh Ben I don't know if Ben's still here I think you just plugged it in it was there but this agent Smith we gotta go we gotta get agent Smith up here there we go yeah I gotta get that clip and put the put the thing in anyways um I'm I'm pumped I'm I'm super stoked about this uh I might even have to turn the camera on so there's that so let me I'll look into that media update I might have to turn it on I can't remember it's been a minute um anyways love it it's point space uh didn't an awesome yeah he's got his in uh let's see what did he say it doesn't work currently with the computer slicer only on mobile there you go I'm in here beating myself up last minute questions shoot them otherwise uh this is like a two-minute warning we're going to shut her down here in just like two minutes as soon as I see that this is working agent Smith you're not offline agent Smith you're online I think you're online yeah you're online agent Smith is lying to me right now saying it's offline Ben clearly it's connected to my wi-fi I see it and the slicer sees it so there's that it's gonna be it's gonna drive me nuts and it's only doing this because I'm live right as soon as I shut off live it's gonna pop on there I'm done everybody else let me know what you think I love it hopefully um oh you're on you're on uh you're on an Apple iPad my iPad's at home I'm on the Android app there's another thing brand new it's not even released yet that's probably the problem I avoided it because I took the screw out yes there's only one bamboo maybe go to church Sam pray and maybe you'll get one you never know you never know all right hopefully you guys love the stream I know we talked about upgrades I gotta get them all um officially affixed um offset maker lab thank you so much man thank you um I gotta get these things like screwed in and and I'm going to glue these together anyway and screw everything in but you get the idea the panels look awesome I absolutely love the look um I love the look at this I might change the color I'm not sure yet I think it pops the white pops um otherwise um you know the if you were doing this by yourself plan 30 minutes you'll be good offset maker lab five bucks thank you so much thank you and and officially I got my warranty back after I put the back panel back on get straight from bamboo I just want to let you all know I got my warranty back after I put the back panel back on anyways thank you guys so much for being here we showed a camera we showed a light we showed the fan um you can still see the fan hiding right here and honestly super simple installations if you want to go with these upgrades don't forget the first batch of these will come with the camera light and the fan but it's only for the first batch and according to their post today there's only a few thousand whatever number that is I don't know what a few thousand means um but I I love that they're going to throw that in for the first batch there'll be a 12 a.m eastern um pacific time I believe and and uh yeah so check it out tomorrow there is a link let me see let me let me do this real quick paste boom there hit this link up if you want to get signed up for notifications 12 a.m I'm sorry Friday morning um Friday morning 12 a.m you can start pre-ordering only a few thousand then they're going to shut it off until they get more done a ton of upgrades I mean to me the fees usually do to me to be fair this here this is one of my favorite things this printer as long as it holds up just like the x1 and x1 carbon have um this is my new favorite thing all the cool panels they've shown all custom panels you can do you guys are so creative out there and uh I know you're going to come up with some really cool stuff and I might lean on you you never know uh fix them dude um I might need some cool custom panel no but uh I love it I love the idea of making my own thing and we all love model well most of us love modifying and adding parts and changing things and to be able to customize your printer like this it's like customizing your computer case or your desk or desk or anything right it's just so much fun so um plan 30 minutes for all of these upgrades it won't take you that long most likely um and if you're doing the side panels maybe plan 30 minutes for that it's pretty simple uh you just got to put all the screws in I haven't done that yet I haven't put the screws in so um I cannot wait for all of the side panels as well uh the pegboard panels yes that's going to be cool um ooh hot hot girl side panels we took care of that yeah uh but yeah check it out a lot of fun I love this thing so far I am going to find that clip put the clip in for the camera then get rolling I have a lot to do before Thanksgiving um if we don't see you or if I don't see you again before Thanksgiving happy Thanksgiving everybody I really appreciate you guys being here today um no there's no oil in there um but uh yeah I appreciate you being there today and man this is so cool bamboo lab thank you so much for sending me this printer thank you for getting me involved um and hooking me up with some sweet panels k I appreciate that it's boy in space if you're still here I cannot wait to see your panels man uh I'm going to be watching I was watching in the background of your live stream on uh TikTok um yesterday and uh you know I I was watching behind the scenes I can't wait to see you Oreo panels yes yes I love it all right everybody have a great day have a happy Thanksgiving uh if you're celebrating Thanksgiving otherwise we'll see you soon in a video uh next video I'm releasing is about the Soville SBO 6 and why it's back in the box right there it's actually being shipped out today so there's that so talk to you guys soon have a good one thank you for everybody who donated I really appreciated it Sam uh you know thanks for all the banter I love it um from you uh I was trying to find it trying to think of a country that you would be like what I'm not from that country it doesn't matter uh anyways have a great one everybody