 Here's a quick way of resurfacing your head yourself in this playlist the head was war-causing the Head gasket to leak. So what I did was I taped down some 400 grit sandpaper wet dry sandpaper Take a little pv blaster right down Put your spark plug in the head. I already got my spark plug socket on Throw that on there quick Grab that and just make sure you keep it flush and let her spin All right to go for a couple minutes You can start with 180 first Go to 320 and then 400. I Already did the 180 Wipe her down And then I like to grab a straight edge And look under it in the light to see if you see any light showing through And I've already checked this one. I know this is good. I just wanted to show you this nice quick easy tip Everything's flush on both sides. Make sure you hold it up the light There's no light shining through with the straight edge over it And you'll have a nice flat straight head And now you'll be able to put your gasket on you won't have to worry about leaking plus You'll save probably 40 bucks to get into a machine shop I hope you enjoyed this a little quick tip of the day till next time