Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Sep 4, 2009
How to make a donk
1)Open the vehicles.ide in your data folder and go to the car you want to make a donk 2)Go to the eng of the vehicles.ide line and you should see something like this -1, 1.4, 1.4,0 3)To change the size of the wheel just change were the 1.4, 1.4 is the first one is the front wheel and the second is the back 4)Then open the SA Handling Editor and load your handling.cfg 5)Then once you hav done that select the car you donked in the vehicles.ide and go to the suspension tab 6)Then all you hav to do is change the upper limit and the lower limit. I suggest the you put the numbers up by 0.2 eg. if the upper limit is 0.41 the change it to 0.61 and if the lower limit is -0.25 then change it to -0.45 NOTE the lower limit has to be a neggitive 7)Now hit the Save handling.cfg buton and your done
If yousee cars floatind dont worry you have to tune them to make the into donks