 Hey YouTube, I just thought I'd share this this city with you This is my H5 S And I did the antenna mods to it Particularly antenna mod I got I don't know I need to try this stuff. Yeah, I suppose it's always the expense But anyway, it's um, it's had its own telemod on of course I did Did the battery mod as well, but then because I had had a bit of a rough time flying it and Sometimes when it flies it just switches the video off, you know you're recording and then you've got no video because it must have switched itself off No a couple of huge things Sort of plague This like it can switch into manual mode sometimes by itself or at least it seems like it does because You know if you're flying low and you just click the grass a little bit, and then it shoots up up into the air It's almost like battling with the stick when it's in manual mode because it's you know in the center position It raises itself anyway, so So I figured to get around that because that's the switch for record I thought well, maybe you're in a bit of a panic and you've got to put it to return to home mode And we'll get out of that and it's not to try and get it to control again into some sort of control I thought maybe I'm getting the switch. So the idea was to Take the switch off the board momentary switch And just put some connections to it and put another momentary switch up here So I could turn on off the video from here, so we don't want the video on but that's nice and out the way So I'm not gonna accidentally Knock it off while I'm doing other stuff, which is what I thought had happened but unfortunately I I didn't use my heat gun I used my soldering iron and I managed to just damage the track on the board Because I went into it a bit like I'm running a China shop It's stupid really but And so what I've done is damaged it and what happens Give me a second I'm scared to one of the batteries on the back Like I said, it still comes on and it still flies, but I've got no feet now from the video I just I'm not going to do any of this Just a demonstration. So what you don't do is you don't get any video feed You can still take pictures. I can't switch the video on and off like I said I've damaged the track Switch but I can still take pictures, but I can't see what I'm taking So basically while I've done test that it's just sent something to the air. I mean, I could have done it from here You can I just press and I thought it wouldn't have a look at the air What's recorded, but it's because I was flying it And I thought about it. I said something to the air, took a few snapshots doing like a 360 panoramic view and they all turned out so Yeah, no, it's not that it doesn't work anymore. It does work It still flies. It still does everything it's supposed to do But it doesn't do the video and you don't get CFPV Which really It makes it for me quite difficult flying because line of sight This thing can shoot off quite quick quite fine. If you don't know where it is, you can't see it It's a bit of a nightmare, but you have a big FPV of course, and you've got your sort of soundings You know, you get to relocate it really quickly and fly it. So that's how I'm going to do today. I'm going to fix this So I'm going to do basically I'm going to take this board out Now you can't buy these boards You can buy replacement hunts at 76 pounds from Banggood Could be slightly available in the price now But in order to get a board which I have you have to talk directly with Hobson and They will send it out for you know, this cost me this has not got the FPV receiver You see on the corner there. I'm going to take all off my board and put it on there Doesn't look too difficult But this is the switch I damaged the track too You probably see that that's all pretty fine. I don't know if you actually See how close it is sometimes Try and hold that and make the light to it, but I don't know if you can see how far there is Hey there YouTube Okay, so we've got a mission on with this then so I got the word back from Hobson Regarding these two boards And the reason why there's a difference on the boards is because this one the new one is an updated version of this one so This has been modified They obviously had some modifications to make some upgrades and they Made a new board So this is wrong and be fitting into my transmitter case After I take off the battery connections And I've also got to take off the FPV receiving Module which is here and be sold of these be sold of here Pop it there Flux on these sold it down nice. I can get that up. This one's still here. This is for the control part of the transmitter But Those why they've moved these That's not amazing why they've moved them, but I just wonder why they did move them They've moved up from where the battery connections are needed to the side here and also This connection is over here now rather than here hole Oh, no that bombing that is a different Figuration to this I need to get this done But the first things first I cannot do this while this Is like this So we have to do a little bit of a magic show and I didn't do that up that much tied it up to be fair, but I made a bit of a space to work in I've just been Just taking off the majority of solder from these pads And I'm just gonna put a bit of flux on it now and a wick And carry on okay, so I use me solder solder iron and Use some wick To get this off, and then you can see This is off now And that's all I've got to take off this old board and put onto the new one Apart from the power cables as well, of course But everything else can just stay on there now. There's nothing wrong with this board. It works great as a You know just for flights, but it's no good for the FPV Like I said, I damaged the switch and I'm gonna keep hold of this load because There may be a time I may be able to repair the switch Or at least the pad the Connections, but they won't be yet and it may never happen You never know So that can be discarded All soldered I've put some clucks on the pads I Soldered it into place. So I'll come back when I've done that a little bit of snot is on there So there we go. That's all soldering Too difficult More of a pain to actually take it off the other one, but So Put the power leads on So what I'm gonna do now is fit it Fit it put the ribbon cable back in Connect these up and the antennas up Put a battery on it and give it a test Fingers crossed, right? Okay, okay, so well, I've put all this back together. Let's get our lights out the way if we can I'm gonna take me internally It was just for I was checking it says keep playing Externals Just get Per tweezers What I'm gonna do now is All this is on I'm gonna fit the batteries and put the case on and we'll switch over. I'm gonna show you We have a new function. Well, we have a new feature let's say Within this new board and this is the upgrade board This is the latest version board that you can get one of these transmitters. We'll get that screw out there Screw Down there or looking at it again. It's actually part of the it's what actually keeps it enough to see through now Okay, so let me cut together on the level of care for the batches in put the back on Just turns baby on and it looks normal Normally look We don't have anything to do with the the quad on here because the quads not switched on now I've bound this already Because of course you've got to bind the transmitter back to The quad again, so I know I've already done that so I can just go ahead and just show you this Now we're gonna get the rest of the information So we've got Starts up slightly different With that green background. I'm just gonna go ahead and do this compass calibration. Okay, so I've calibrated the compass in And as you can see The camera works. That's not a problem That's quite nice Yep, it's quite nice. It's responsive now. I noticed that there's another function of this There's another function So Well, what you gotta do basically is just put it into the normal Hold this down and get your manual Now I don't even see that that's better Let me just switch off the flashing lights. Okay, so it's not gonna do that. Why that's something there Okay, so we can keep those LEDs on or we can press that button again And we can turn those LEDs off Pull this down So we got the normal set reverse Sensitivity frequency set manual and you got fly with no GPS so that was a That's a new a new feature And of course with the version on here and mine is now on the version 2.14. You can see that my quad stone version Well, it says version 1.2.3 then it says You know version 1.117 is what I put in there I'm not quite sure about all that but yeah, so fly with no GPS So you don't have to have it See manual mode is still there fly with no GPS Which will probably come in quite handy Because even though the GPS features good It can be a bit of a pain in the ass It's constantly trying to Feedback on your flying. So let's say you're doing like a figure of eight and you're doing it pretty quick You can't just use What you consider to be like the normal flow of the quadcopter You're throwing it into a corner. You're gonna expect it to Drift out of that corner just flying it until he starts turning the N and power on the M When they got the GPS on you see it tries to take that away from you. So you start it's almost like you're trying to Swim with you with your clothes on You know you can still do it, but you're being held back a little bit It's like you're coming quite handy Especially you can use that without having to use the Manual feature setting into manual But I don't know what a jib around about so I Just thought I'd show you that fly the magic. Yes, there's a new feature on the board. I'm gonna go and share it