 All right y'all, what is up? We're pre-reporting tonight because we have some parents to run in town so This is gonna be just a quick video testing out some new tape from Waller strong it is A white tape they sent it to us to test out and see how we like it. We haven't gotten a chance to really see the How do you say? Resistance resiliency, I don't even know the words right now But what I'm gonna do is I'm gonna build up a wall around this and put in a second layer And we'll see How well resin does not stick to this stuff All right, it does not tear as easily as the orange tape which tear tears. It's not words tears Really well super easy um This tears off at like a funky angle Typically when we build walls like this we use like an aluminum tape We've used that frog tape before So you did again? You build walls like this you want to keep in mind That you want to keep your corners kind of sharp So I always pinch the sides And you also want to keep in mind That you want it to be straight up from The base Not kind of curved inward at all Or curved outward like this is kind of like falling backwards a little bit Which is not ideal, but I'm not gonna fill this thing completely. So it's not That big of an issue Also something I'm noticing with this tape is that it kind of Did it again Kind of bows with What's that? What's that tape masking tape I guess? You can kind of bend it And work it to move in the direction you want it to What is that a painter's tape so now we have our base and I'm Going to Mix up my resin of course. I'm going to be using Stonecoats art coat. It is my favorite resin for many reasons Among which include The well over an hour working time. I've worked it up to two hours before Of course Can take him anywhere That's under ideal conditions, which would be like a dry 75 ish It's UV resistance is Top-notch and What else can I say about this awesome resin It's heat resistance is up to double boiling water, which is 500 degrees. Well, it's 260 So it goes up to like 500 degrees heat resistance It's chemical resistant water resistant life-resistant It's pretty amaze balls if I do say so myself And It's really easy to work with there's no smell. I don't get any like resin rash or like a bad Reaction if it gets on my skin Doesn't irritate my eyes at all all amazing things So let's mix this concoction together Typically it only takes about three minutes for this to work into itself See y'all right now. It's kind of cloudy colored When it's fully integrated into itself, it'll be super super clear and y'all The stuff sets up glass finish style I think I'm gonna use like blues and teals and turquoise is like silvers and whites for this top layer I'm pretty sure So I'm going to leave the tape on the sides for How long do you think be before we remove the sides? To keep the depth Six hours Yeah But that means getting up at like old one in the morning to peel this back so we're gonna we're gonna treat this as if we forgot to peel it off and What to do about it? So we'll be posting in the morning about how we found this piece and How easily or not easily the sides are removed? I'm using some of our brand new handy-dandy stir sticks available on our website Also, if you choose to try out stone coats our code, please don't forget that you can use our code y'all YALL all capitals no apostrophe and that'll get you thirty dollars off of your $80 order Just make sure you have $80 in your shopping cart when you apply code Sorry about the wreck it and it will take $30 off of your total, which is the man as for such an amazing resin Absolutely bananas. All right So we've got our resin Let me get our Cups stir sticks Let's get rolling with this So I'm only gonna use a little bit of silver So I don't mix that much of it because typically any of your metallics are going to like really really take over so Minimal is key when using any kind of metallic like a gold or bronze or copper or silver or anything like that You'll thank me later. Trust me. So for this I'm using Mona Lisa's metallic metal powder in the shade silver We tried it the other day and it worked pretty well But I think we just didn't have enough of it mixed in to do anything spectacular Keep in mind when working at home to start with about 10% pigment To 90% resin in order to not end up with like a marshmallow fluff consistency You're gonna put just a drop more in so that it kind of covers the dust From the powder that I just put in here So it doesn't kick up if you guys are at any point irritated From powders or fumes or anything at all don't hesitate to wear a respirator of some kind Safety first Sorry, my phone keeps going off. We're supposed to be meeting people tonight So I'm also using a Caribbean blue from color obsession. This is the tint and it doesn't take much to give you a really nice shade Typically it comes with a dropper. I have lost mine. So I just poured too much in here, but that's fine it's an amazing amazing color and I'm gonna add just a little bit more clear to kind of bow down this Tint that I just mixed up What else do we have here? I'm also using it turquoise by color obsession. I'll have the tints back in stock by the way estimated delivery from DHL said the seventh so That is Day after tomorrow. Hopefully that'll be the case We will see I just love all turquoises And I'm fairly sure that's just your color as well any turquoise The next tent I'm using as blue topaz I'm just gonna put a couple drops in It's kind of like a gray blue It's very nice Will you put my phone on mute, please? There's switch on the side Left side Okay, well you did you mute it to switch? And a switch So I'm gonna put it clear down for the base because I want to create that separation between What was already down and what I'm about to put on here so This will just create that Definition I suppose Hopefully it'll be evident once this dries and I peel the side off so I'm just gonna push this around to all the sides and make sure there's nothing That's dry on the base canvas Also, check out our video on sanding and prepping for a second layer I'll add that that into the The description box and put a pop up so you guys can see how that happens Just gently pushing and working The clear resin over to all the sides you can do a Center it's been a layer as you want to but you really don't want to go any thicker than an inch and a half what's An inch and a half or less and pushing it for a standard resin Stone coat has a casting resin now that's awesome for pouring up to three inches thick which is completely bananas if you've done any kind of casting or thick pouring or like What's it called? Like river tables with resin That is a lot of thickness for resin. It's amazing So I'm adding a little bit of heat now to pop these bubbles The heat's affecting this tape just a little bit Hopefully it won't affect it too much since this this is a product test. Well, I'll let you guys know our thoughts on it Real deal no matter if we like it or not So let's add our colors this color is very similar to What we already had on there initially What I really like about the tints is that their Transparent so you can see what we already had on there on the first layer which is Fantastic in my book That way you don't waste what You did on your first layer unless there's a part you want to cover up Then you should use a paste for sure for sure and this white is from stone coat The key to using it successfully is that you need to make sure that your other colors go over This white if you push your colors Have you pushed the white over your colors then You're not gonna get the same amazing cells that you would otherwise Just a heads up and just pushing these around to create some movements Yes Be it was that we didn't add enough so because I have these walls up I can move and manipulate and rotate around The resin that I have on here Not worry about any of it falling off These edges are starting to get droopy so let's switch to a torch and see if it does any better I'm gonna add Some white through this blue area so I can push it that way see what it does Amazing things not surprised so maybe the best to use when you have Walls up is the Torch that way you don't have to worry about heat hitting your edges I'm thinking at this point anyways. I could be wrong. I could change your mind, but right now That's my thought process Do something with this side? Looks kind of dull When you have walls up like this remember that anytime you add resin it's going to push all of it To some extent because it has nowhere to go other than back into itself Just keep that in mind Lately I've been swiping a lot, but it's hard to do any kind of swipe when I have like no room to do it in But let's let's see if it'll work Hit some heat and see how it shows up Whoa Made all of that silver just pop up So we're going to see how this works and we're going to revisit it In the morning, so we'll do another video then We can see how this turned out really like deep separations My pieces that are like ocean-esque So I'm just adding these dark areas in For two reasons because I don't want to waste the resin and I like the deep areas in Painting the darks I think it gives the guy something to pay attention to And anytime you add a color make sure you put it with some heat so that the air bubbles don't Give you problems later on Because they will I could say that I like it better than I did before so that is a plus So I'm going to put this in our just free zone and we're going to see How this ends up setting up I guess I should give you guys a close-up real quick And then last night we did this one That turned out amazing. I can't even handle how well it domed down the edges. I wish you guys could see it We're gonna do a True color video as well On YouTube on ATD So if you're not already Join our four people's group You'll be able to see all the True color videos that we put up Sometimes on YouTube the colors don't really Do the piece justice? but Turns out better on YouTube, so Tune into there to check it out Join all of these things and we'll see you guys. What is today? Wednesday? We'll see you tomorrow at our regular time 8 p.m. Central Standard United States time For our next masterpiece y'all We have some new stuff we want to try out so make sure you tune in also Almost done sending out orders and answering emails. What? It's what we've been doing all day Jeff has been a super trooper about helping me out with Packaging these rounds because they are not easy. Anyways, we'll see y'all manana. Bye Bye