 Hey everyone, this is Charles at Cobb Tuning. Today we're going to be going over how to do a data log on your V3 access port. The first thing you'll want to do here is head on over to the gauges section on the main menu of the access port. From here we're going to go on up to the setup menu. So click up, go to setup, and from here you can change a variety of different monitors and settings. So we're going to go into the configured data logging section. From here you can select or deselect different monitors to record for a data log. Simply press the center button to choose those monitors. If for whatever reason you want to reset to the default monitors, go all the way up to setup, select reset to defaults, and it'll go back to what was default. If you want to start a data log, simply go to the gauges section when you're viewing the gauges. Press the center button to start the data log. Move around, monitor whatever you need to, and then press it again to end the data log. And that's it. We've successfully done a data log on the V3 access port. Alright everyone, as you can see it's that easy to data log on a version 3 access port. If you want to actually view the information that you recorded on the data log, go ahead and connect your access port to access port manager, and from there you can extract the file and take a look. As always if you have any questions, feel free to call us at 866-922-3059 or shoot us an email at support at CobbTurning.com. Thank you.