 We're alive. We're alive. What's up, y'all? Probably going to have to talk louder than that. So I hope you can hear me. If not, my bad. We are doing this video on the phone because the laptop's still making that funky noise, and I don't want to irritate anyone's precious eardrums. So I'm going to be reading off of the iPad and we're filming off of the phone. So on the plus side, the color is going to be true, but on the downside, you may not be able to hear us as well, and there's no stripper music and there's no microphone. So please message us and let us know if you can't hear at some point. Hey, y'all, hey, y'all, hey, y'all, hey, y'all, hey, y'all. So I hope everyone's having an amazing and normal. It's Memorial Day, isn't it? Tomorrow. Right, but a lot of people are celebrating it to dirt. Hey, y'all, hey, y'all, hey, y'all, hey, y'all. So we decided to make masonite coasters if you guys already don't know. They look like this. Great then. Hi, Tina. I would suggest just using a little less than what you'd normally use for a coaster just because cleaning up the back of these. Not going to be as easy. Probably, yeah. And then we suggest that when you do them, lay them flat on wax paper or plastic or whatever that resin doesn't stick to. So if it does come off, it just kind of goes off to the side and you get a little off here. And it's probably a little easier to clean that up than the bottom drip because you will definitely tear this bottom up. So we suggest that you put them flat. It'll probably be easier. And this edge is such a hard edge that the resin should just stop unless you put way too much resin on it. So we have a question of if you can put the orange tape on the back of it and act as a masking. I don't see why not. Do we have any we could test? Is it on your? It should be orange tape, right? And I want to use this new color. We have a couple new colors from Just Resin. A couple of them they sent. We bought. But this pistachio looks amazing. And I'm not a fan of gray, but they made this slate gray that looks phenomenal. I would like to try to use this today. This ice green looks amazing. This mango and Maya blue. I love this Maya blue. I don't know what this will go with. The gray probably. I wanted to put that hot pink with it. And I thought about, I made this yesterday at Makers. I hope you guys can see this. I edged it and cut it out. And I thought, what if I just resin the back of it so that you see it on the front? That'd be something kind of fun, something different. So you definitely have to do a couple different swipes. So I wonder if you put the color down, then the black over it, would it sell reverse? If you put the color down, like when you're supposed to put the black or the white first, then you swipe over that. What if you put the color, then the black, and you swipe? So then when it sets, it'll sell this way because it's see-through. Because you're going to paint it this way, and the dispersion is about gravity. And while you are going to be ending up viewing it this way, it's not going to float through because it's setting this way. So you know what I mean? It would have been an awesome thing if it did, though. I know. We'll see. Hey, y'all. Make a skin to attach if you want the cells to show. Also, I sprayed this coaster with mirror spray paint, but it's still kind of like all the way see-through. That I'm just looking at my own reflection as soon as you see through. Now it's see-through. I need to put another coat. Hey, Lisa. I think this will be really neat once I get enough coats on to make a difference. I think I'm going to use these three with the gray. What? So you're going to use Maya, slate, pistachio, and hyacinth? No, no, no, no, no. I'm going to put those three colors together with white. I like it. We need computer desk today for a poor tomorrow. That sounds exciting. So bright. That's what I was just thinking. It's crazy. Also, y'all, I have to show you yesterday's. There's something in there. That's partying. I made too much, and so I poured that out a little bit. This piece that I did the other day and resin yesterday did fade slightly, but the dots are still there. It's just not as vibrant. Uh-uh, Bowie. Don't shoot me on that. Drop it. So, yeah, Jeff, don't forget your bracelets. We're going on coasters that really, it's not that big of a deal, because I'm not getting too crazy. Hi, Doyle and Austin, Phillip West. Bowie says hi. Hi, Amber. I'm glad you made it back, Amber. Good to see you. Oh, wow, Margaret, that's a lot of coasters. Bowie, Bowie is just about as big as him now. This coat is just trying to be baby skull in there, isn't it? I just need to give you guys something to chew on other than each other. Yeah, we have a Facebook group, ATD's Poor People. All you got to do is just answer the question to join. We've got about 4,200 followers. It's true, it's true. We're almost at 28,000 subscribers for YouTube. It's true. Please continue to share and like and share and like. Trying to get to that 100,000 one day. So I'm going to take off the back of one of these with this super tape. Y'all, see how easy that tears? I can never tear tape. And it tears straight. Which one should I do the back of, it doesn't matter. I'll cut it. Also, y'all, I'm going to try something new and do another form of geode that I'm super pumped about. After I get my fiberglass cloth in. Enough. First time I've ever made this amount. I've seen people use pumps on large bottles as well. This is such an amazing color. Which one? You can also use an exacto blade to do this, but I don't have one handy and I do have scissors handy, so I'm going to scissor it. I want to get Boy one of those like interactive toys where it's like a puzzle and you just figure it out to get a treat because Boy can eat. Glad, Ruth, I'm glad you like this tape. They're definitely really awesome. And if you're interested in this Walder Strong tape, you can just search it on Amazon or you can just click down in the description box below this video and there will be a link to everything that we use on the channel that we don't carry in our own store on our Amazon affiliate. It doesn't cost you anything extra to order through our link, but it does give us a little kickback that we can then put back into the channel. Disclaimer check. Hey Angie, love your shirt, Jeff. Oh, thank you. It's pre-edited. Thanks, Jen. Do you guys have big plans for today? Thank you for that info, Tiffany. We finally got this and that back in stock, the white and black, so you can find those on our website at your convenience. Big plans, sitting on my butt watching TV. That sounds like awesome plans, to be quite honest. Almost every one of our friends are having some kind of cool party today and we were like, we love them all, but let's just, let's go to makers and make things. No, I think I'd rather go make money than spend money. I'm sorry, Lisa. Moose fine, he is not coughing as much. His vet prescribed him like the puppy equivalent of like codeine cough syrup, I think. It says 15% off all on the front of the bottle in big letters. So he said, I also got him some CDD oil. I haven't given it to him yet. I wanna see if this prescription stuff works first, but I'm gonna call back. It is zero THC and it comes from like a vet in Colorado, I think that's where it is. But I gave Kujo's vet all the information about this stuff to make sure that it's good. So Tiffany, we belong to Dallas Makerspace. It is a 40,000 square foot facility for creators and makers. It's just called Dallas Makerspace. Hey, Megan. So what's going on, Moosey? I need colors, Megan. Please use the mango. I don't think you made enough resin for mango. It's true, Clara. Oh, you're being too quiet. Are you getting into shit? Many stuff. Once he looked like a little bear, and now he looks like a full-on lion. So today, Jeff is testing our new Masonite coasters as well as some brand new colors from just present. That would be awesome, Tiffany. Where did you say you were? Megan, that sounds horrible. We do still do classes. Our next one is June 1st, and I think we still have a couple of seats in it if you're available. I think it. My gray is gone. Like nothing. I'm gonna change everybody's view. Sorry about that extreme close-up, y'all. Louisville can tell you that's not too far. That's Austin Doris. Jen says she needs that gray. The gray I don't have in stock yet, but will. It's gray because it looks like a pretty silver, but without the metallic or the sparkle that's in silver. So it literally is a nice slate gray. I don't even like working with gray, but I feel like I would probably use this color. Now it's supposed to make gray look pretty. No, I don't want to use it. Do you and Jeff have any plans for today? So they want you to hold that up so they can see it. We are gonna go to Makerspace and get some stuff made for you guys. I'm running low on these masonite coasters. I think there's only a few left in stock online. And I need to make more sticks and the clear coasters. And we're thinking about making clear clocks for people. I just need to know if you guys think that would be a good idea and also... What would you pay for them? Well, like if we did a 12 inch clear round that has the whole drilled in it for the clockwork stuff, would you guys be interested? Also, are all the like clock mechanisms the same gauge or what? I hope that makes sense. We are making our own sticks now. It kind of has become necessary because everyone we were having help us with that are just too busy at this point doing their own life to really get us stuff in a timely manner. So we're doing it ourselves. We did cut the masonite circles on a laser cutter. It's like the most watermelon-like thing I've ever seen. Check clockparts.com. What's up, Sina? Thank you. Hi, Ida. So they would like you to hold up. That pistachio's gorgeous. Can't wait to mine her eyes. Bowie! Nope. That's fun. Totally should, Clara. Bowie moved pretty fast. So, Moe was probably in the closet and Bowie was trying to chew on one of her cameras. That's great, Tiffany, that's awesome. Yeah, we were thinking of doing some wonky shapes too for the clock flinks. Rest of your own vacation. Thanks for tuning in still. Can you set that down? That does not look good with that gray taking over. Hi, Amber. GeoChance would be cool. Working on it. Wonky's a pro term. This is true. I used it very often. We miss you too, Rusty. We've got Texas shaped clocks that sell well. I bet you're right. What's the same color you used on that one? A little different. Margaret, you think this one looks like a cloud? Northern Arizona, cool and windy up here. We've lived in near Tucson for a little while. Well, in Tucson. That one looks great. I'm in milling paths. I'm in milling paths into wood on our CNC machine and filling with resin then standing off the back and backlighting with LED. It looks like a totally different color on the black. That's kind of strange parts. You're good. It does look totally different. I have no idea what end milling is, but there's a lot of stuff I want to learn in the wood shop. But you have to take so many classes. I already took two. Oh, I know. It's like I'm not going to do it. It would be a great date night to go to Maker Space. Any idea when a clear poster is coming in? They should? Hold on. You definitely have to put the gray down first. It'll take over. I'm just making mud. You shouldn't have any problem with the resin going over the sides and leaving big drips because it stops right at that edge. I think they'll look nice. That was fun. I'm fixing the inventory now on the posters, y'all. I'm not mad at this one. It just looks almost gold when you put it down on the black. There you go, Julie. You should be able to order the clear rounds now. We've seen them. Look how fun that is. That was fun. I'm sorry, Sherry. We are pouring on a camera today like camera phones instead of the regular live streaming cameras because our computer is making that noise and I didn't want to put you guys through that for a whole video. Have fun doing all of the coasters, Margaret. Thank you, Clara. Same team, Margaret. I'm trying to put some of this dust in places. Okay, hold on. I'm just trying to put it on here. I'm just trying to take this dust. It's like gold powder. It's a bright gold powder with a brush and put it on this mold just to see what the resin will do and what it'll look like. Putting some of this blue in there. And I'm wondering if it'll just stay where you lay it. Clara says that technique works great. I've never tried it before. I saw somebody do it the other day. Well, I'm going to get drunk and have fun because spot pouring kill tomorrow. Sounds good. Be safe. People don't know how to holidays sometimes. So be careful. That's true last start. You do never know. But that's kind of what our channel is about. Taking things that may not work. And seeing if they'll work and if they do work trying to reverse engineer what made it work. At least in my head that's what's up. Are you going to do anything to your acrylic black? No, I don't. I didn't really mess with that. We might do some Snapchat or a live stream from makers, but I don't know how good their sales signal is. I haven't even got on there. I haven't either. Tia, how you doing? You've been making some beautiful stuff. Are you the artist formerly known as death? You know what they say. I'm going to go back out and show you the diptych. I'm taking it for a ride and showing that pink and light blue. Those colors went really well together. So I'm going to try to move pretty slow so it doesn't get buffery. There's this little guy. This is probably my second favorite. I don't know about that. That's a gorge. Maya blue, hot pink, slate gray. I'll be ordering slate for you guys. It's not pistachio. It looks great with that paint, man. This is where we're at with these guys. My Lisa Frank waves. This is from working that quick coat too much, but I feel like I could make actual waves on a piece. With that technique. Tiffany, I stained these yesterday on the live feed. So if you just look one video back, you'll see the making of this diptych. I also resined this piece, but it faded just a little bit. But the dots are still there. I'm glad, Tia. Anything I can do to help. So it did fade. It was about this vibrant. So I'm going to put extra coats of the varnish on these to make sure that they stay lively and not dull out a little bit. Hi, Diane. Ultimately, I'm going to end up cutting out these little drippies and dots. Maybe mount them or do something because I just love it. Not all. It doesn't look like a cohesive piece, like altogether, but parts of it. Anyways, thanks for tuning in, you guys, and seeing what we're up to. Moe wants to say hi. No. Crazy boys. I was like, I already have a snack. What do I need your snack for? And Moe wants to go outside. Don't you want to go outside? I know it. The video on how I made that diptych is on yesterday's live. Okay. All right, you guys, I got to take the boys out. I hope you have an amazing Sunday and a safe memorial day. I will see you guys tomorrow. 8 p.m. Central Standard, Dallas, Texas, United States time till then.