 Γεια σας, είναι Vicky Γεια, καλώς ήρθω back! Ελπίζω να σας έχετε ένα καλό νέο χρόνο. Σήμερα θα έχω πολλά αρκετά, με παρακολουθήκης με σκοδές φαρές που βλέπουν αρκετά, όχι όχι να σας δείξω ένα τρόπο που αρέσει να κάνω και χρησιμοποιώ μετά στον σκοδό, να τα παρνάψω σε 3 δημιουργικές φαρές. Μπορείτε να κάνετε αυτό με αρκετά φαρές που έχετε στον σας σκοδό. Απίσης, για τη μου δημιουργία σήμερα θα χρησιμοποιώ μετά το νέο χρόνο σκοδό από το τελευταίο που βλέπει από αρκετά νέα. Και υπάρχει ένα κομμάτι στον μου βλαμβό, πρέπει να σας δείξετε αυτό. Βλέπω ένα σκοδό της φαρές που θέλω να δείξετε και χρησιμοποιώ μετά το σκοδό. Αν σας δείξετε αυτό το όχι που θα χρησιμοποιώ για σήμερα, μπορείτε να δείξετε ότι υπάρχουν δύο λεκτές σκοδές, αυτά τα δύο στον μου βλαμβό και τα δύο στον μου βλαμβό. Αυτό reason θα σταματήσω αυτό το όχι μόνο λεκτές, για να μπορώ να το να ασφαλεί το βλαμβό από το τελευταίο λεκτές. Αυτό είναι το σκοδό της σκοδό της ορκίτς. Και μπορεί να είναι ένα λεκτές σκοδός, για να δείξετε μετά το τελευταίο σκοδό από ένα λεκτή, χρησιμοποιώντας δύο λεκτές. Υπίσης, η τελευταία σκοδόνται με το τελευταίο πάνω μόνο. Και θα έχω ένα παράδειγμα στην επόμενη αρκετά. Εντάξει, να δείξω με τα δύο λεκτές ή τα αυτοπούλες για το σκοδό της λεκτές, επίσης, για αυτή την λεκτή, είναι να παίρνεις με τα δύο λεκτές σκοδό με τα δύο λεκτές. Ότι δεν θα χρησιμοποιώ γιατί δεν τα μιλάζω αυτό το ποτέ. Και ευαίωστο να αρέσει τα δύο λεκτές και βιβράντας εμπραστά που δοκιμάζουν. Αλλά έχετε να είτε πολύ καλύτερα γιατί η πιγνητική δοκιμάζει πολύ σκέφτα και δεν θέλεις να έχετε πολλά πιγνητική σε το σχέδιο σου. Λοιπόν, χρησιμοποιώ μου με το μυστικό. Θα ξεκινήσω με το πρώτο κόλο που είναι το πιγνό. Τώρα, το πρώτο λαό είναι ένα σκέφτας σκέφτας και πρέπει να πρέπει αν έχετε σκέφτας με αυτό πριν, διότι δεν θα δεξιώσεις καλή εμπραστά. Εδώ χρησιμοποιώ ένα σκέφτας σκέφτας. Είναι ένα σκέφτας, σπιστικά μεταξύ Αλτανοί για αυτό το δρόμο, αλλά, ευκολα, μπορείτε να χρησιμοποιώ σας ή ένα σκέφτας που έχετε στο σχέδιο. Για το πρώτο λαό χρησιμοποιώ ένα πιγνό, θα σκέφτας αυτό ένα σκέφτας, γιατί θα γίνω το πιγνό. Τώρα, πολύ σκέφτα και εύκολο θα έχουμε δύο πιγνό με ένα πιγνό. Το δύο λαό είναι το πιγνό. Αυτό είναι το ρουμπίραιτο και θα πω με ένα σκέφτας αυτοκλειών, που είναι το πιγνό. Είναι ένα πιγνό, όχι, τόσο μεταξύ και θα χρησιμοποιώ εμπραστά για αυτό το πιγνό. Αν έχετε ένα σκέφτα για το σκέφτας που είτε μες, δείξτε να χρησιμοποιώ αυτήν την τύχη. Αλλά για αυτήν τη σκέφτα, δεν θέλω να έχω ένα πιγνό. Δηλαδή θα πω στην παρακολουσία και θα χρησιμοποιώ εμπραστά, για τα δυο φασίδια. Η πιγνότητα είναι ότι αυτή η σκέφτα έχει πολύ εύκολο να χρησιμοποιώ εμπραστά και να χρησιμοποιώ εμπραστά was really quick and simple. Αν θα χρησιμοποιώ ένα από τα φασίδια και αυτήν την τώρα θα χρησιμοποιώ μόνο τα δύο πιγνόνια που βρίσκονται στην πιγνότητα. Ενώ, εμπραστά και εύκολο να κάνω με τα σκέφτας. Αυτή είναι η στιγμή γιατί δεν θέλω να χρησιμοποιώ εμπραστά με τα δυο φασίδια, γιατί θα τελείω με κάποιες πιγνόνια Τώρα, depending on the flour that you are working on you can go really wild and you can even cut out all the petals separately. Αυτό θα χρησιμοποιώ το πιγνότητα στον σκέφτας, γιατί θα εξοφασίσουμε και είναι πολύ πιγνότητα για εσύ που πρέπει να χρησιμοποιώ δύο πιγνόνια. Και ευκολο είναι ένα τρικ που έχουμε να κάνουμε όλες τις φασίδια που έχουμε να κάνουμε όταν είναι σκέφτας, είναι όλες μια καλή ιδέα για να πηγαίνουμε στα καρδιά σε κλαμβό. Αυτή θα συμβαίνει καλή ιδέα στο τραξίδιο που πήρες ανεκαλήρεις τη φ плύγη. Θαέλω να έχω φωτοφασίσια για ταροκίνδεμα που βρισκοπέ. Αυτό why I'm going to just drag the ink all over the scrap piece of white cardstock. Και βλέπω ότι μπορείς να είσαι εδώ간 και πολύ δύσκολο. Μπορείς να χρησιμοποιώ τη μιέτυυ έπαιξη για να φορει πιγνώνα και να έχεις ένα σκέφταςλό τορακίδι or you can use your scissors and give it a curve. It's up to you what you want to do for your finished project. I'm going to give some dimension on the separate petals. For that, I'm using a set of tools that I have, but you can always use the back of your bone folder, the back of a pencil. Just grab whatever you have at home to do something similar. The set that I'm using is by physics, by the way, and I'm working on a very soft surface that came with the set. However, you can use a mouse pad, which is perfect for that. I'm using one of those round tools to break the fibers at the edge of the petals, and this is going to help them turn towards the top. This is going to give a really dramatic look on the paper. And when you will finally put the flower together, it's going to look really full and dimensional. But you can have a similar look in a more simple way just by using your fingers, which is a technique that I'm going to do for the next card. I'm going to use the same technique for the leaves, just breaking the fibers there and help them have a little bit of a curve. And for a flower that is going to be so dimensional, I want that to be the focal point on my card. That's why I want to have quite of a subtle background. I'm going to use this white panel and I'm spraying that just a little bit at the front and at the back with water. Since I'm going to use the Ribbon Waves 3-Dimensional embossing folder by Altenew, this is a favorite, absolute favorite. I find those waves so lovely and you can use it back or front. Both sides are so pretty and I'm going to use both of them in the two cards that I'm making today. And finally it's time to put the card together. For the two layers of the flowers, I do have a tiny little foam square in between them. So they do have dimension. And I'm going to stick that directly on top of my panel. I'm going to tuck underneath the stem and then I'm going to finish it up by sticking down the leaves. Now the background is embossed so you cannot stamp there. However, I did use die cuts. These are from the Simple Greetings die set that give you the outline as well as the actual words. I do have foam square at the back and I'm going to stick that on this panel. This is a scrub, but no one will ever know that at some point I did cut out a butterfly out of that. I placed the whole panel on top of a pre-folded 4 ¼ x 5 ¼ card. You can see here the lovely dimension that I got on my flower. For my second example of turning a flat flower image into a dimension as well, I decided to go with this really complicated design just to show you that it works with any flower design. So I stamped that three times because I can see lots and lots of petals and I can go really wild with that. I'm going to do quick coloring. You can go ahead and color it with your favorite coloring mediums. I'm going to turn it into a super quick card. That's why I decided to work with the stencils. A really quick coloring would be to go ahead and cover up completely with a very pale color, the whole flower. This will go really quickly and you don't have to do a lot and then go with the stencil on top of that to add a darker shade of color. However, I decided to have my flowers completely white so that they can pop on a darker background. That's why I'm not going to do that. That was just a demo and I did go really soft over them. And the only thing I'm going to do is to just apply the stencil on top of the flower and add only the shading through the stencil. And I will end up having three flowers colored in no time. Working with stencils to apply layers of a shading on your flowers is a really easy and quick method because they are really easy to align. And I'm using just a piece of repositionable tape so that I can keep my stencil down. And I will repeat the same process two more times. By the way, the flower image that I went with does have leaves as well. I'm not bothering with them at all. I will chop them out with my scissors later on. And I will use separate leaves for my flower composition at the finished project. By the way, this gorgeous flower comes from the vintage garden stamp set from the latest release by Altenew. Now I took a very close look on the design of the flower. The first layer is going to be the complete flower so I did fuzzy cut that already. For the second layer I am going to decide which line of petals I'm going to follow making sure that this layer is slightly smaller than the first one. Again, I do use my scissors to fuzzy cut all the layers including the background which would be easy to cut out with my matching dies. However, I don't want to have that white border all around. This image was more complicated than the first flower that I did for the first card. It took me a little bit more time but I love fuzzy cutting and I don't really mind. I really love the finished outcome with the full dimensional flower. It really makes a perfect focal point for a card. So here you see I ended up having three layers with the third which is the smallest and the center of my flower. I am adding just a little bit of extra shadows with the latter shade of my alcohol marker making sure that I don't cover up all the white space. I just want to have that white space because I am planning to stick this flower on a darker shaded cardstock. For this flower instead of using the tools that I used in the previous card to a dimension I'm just going to use my fingers and curl up the tips of the petals on all three layers. Then finally I can stick one layer on top of the other by using foam squares in between. You can follow the exact design like I'm doing here or if you want to have your flower look even fuller you can stick the layers slightly off. And that of course depends on the flower image that you are working with. So for example if you are working with a daisy you can cut out so many different petals and offset them to make the daisy look super full. If you love this technique and you want to see more examples let me know in the comments below. This is a super fun project for me and I would love to make even more flowers from stamped images into dimensional ones. So you can see here I'm putting my card together on top of my pre-folded white card base. I did stick my silver glitter cardstock because I love how navy blue goes with silver and white. I think they are a perfect elegant color combo. And you can see I did use the same wavy 3D embossing folder for my background. This time I'm using it the upside down so I did use both ways and you will see in the closer photos that both look absolutely stunning. They are really subtle but they do add that extra something on an otherwise simple card. For the leaves I did use the matching daisy from the same stamp set to cut out leaves that I didn't stamp at all on top. I am playing with different options of my Hello die and finally I decided to go simple with just a white cut out Hello and I did add a few silver gems here and there. Here are some close up photos on the last card for today. I hope that you had fun that you got inspired. Don't forget down below you will find a list of all the supplies that I used as well as a link to my blog where you can enter the giveaway. Thank you all for watching and I'll see you all next time.