 Hey what's up folks, we're taking a look at the Adafruit Funhouse, it's a dev board that's designed for IoT and home automation projects. With a built-in display and sensors, you can easily make Wi-Fi projects in Circuit Python or Arduino. It features the ESP32-S2, a TFT display, CapTouch pad, sensors, and a speaker buzzer. On the front of the board, there's a built-in humidity, barometric, and temperature sensor so we can sense the environment around you. With onboard STEM-AQT, you can easily plug-and-play I-Squared-C sensors to expand your projects. You can also connect relays and break-beam sensors using the 3-pin JST ports on the side. We 3D printed the stand with the Yellowbrick Road theme to complement the amazing silkscreen from Phil B. With Adafruit I-O, you can create an IoT door alarm using a magnetic switch and get email notifications on your mobile device. Head over to circuitpython.org and get your Funhouse board ready to install Circuit Python. Click on the board and select your preferred language in the drop-down menu. Then click the Download UF2 button. Double-press the Reset button to get the board into the bootloader mode. The Neopixels will flash and the display will show a friendly splash screen. Then just drag and drop the UF2 file onto the USB drive. The firmware will automatically install and restart the board. You can then toss any images, library files, and your code onto the Circuit Py USB drive. Be sure to check out the Funhouse Learn Guides for project inspiration, documentation, and example code. Circuit Python makes it easy for folks who are just getting started with electronics and programming. So if you're looking for a way to automate your projects at home, we hope you're inspired to check out the Adafruit Funhouse in Circuit Python.